REPAIR TO PCC HARD STANDING, CHEQURED TILES, INTERLOCKING TILES AGE B/R-II (W) OF GE (W) AGRA

Amount

Taking down of old precast interlocking paver block, chequred tiles any size and shape any description and in any position complete all as specified and directed.

M&L, for broken stone hardcore of gauge n.exc 63 mm deposited, spread, and levelled in layers n.exc 15 cm thick watered and rammed to a true surface for levelling and slope maintaning complete all as specified and directed.

M&L PCC 75 mm thick (1:3:6) type C-2 (using 40 mm graded aggregate) as in sub base, sub floor,and paving complete all as specified and directed.

M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately

Demolition of PCC kerb stone of any size and shape , any description and in any position complete all as specified and directed.

M&L for precast cement concrete type B-1 1:2:4 (Using 20mm graded stone aggregate) as a moulded kerb stone of size as directed including jointed, pointed in cement mortar 1:4 embeding in the ground to a depth as indicated, taping earth around kerb stone and also removing surplus soil etc complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:4) for laying kerb stone complete all as specified and directed..

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggreagates as in side suport of kerb stone or retaining walls any thicknes size and shape including necessary form work complete all as specified and directed.

M&L preparation of newly concrete surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of priming paints plaster coat etc. complete all as specified and directed. .

M&L for preparation of old concrete surfaces of any description over 10cm girth or width not otherwise described and applying one coats of synthetic enamel paint (any tint) etc. complete all as specified and directed. .

Demolition Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC 50 mm thick (1:2:4) type B-1 using 20 mm graded aggregate as in flooring,finished surface even& smooth with using extra cement complete all as specified and directed.

M&L forming construction joint 30 mm deep 10 mm wide saw cut filled with seling compound grade A complete all as specified and directed.

M&L forming contruction (dummy ) joint 30 mm deep 10 mm wide saw cut filled with seling compound grade A complete all as specified and directed.

M&L PCC 25 mm thick (1:2:4) type B-0 using 12.5 mm graded aggregate as in leveling and slop mainting complete all as spfd and directed

M&L prepolished, machine pressed chequred cement concrete coloured tiles 30cm x 30cm x 25 mm thick, set , jointed and pointed in neat cement slurry with mixer of white cement and pigmenet as in floors/pavements/ paths laid over screed bed or bedding layer in cement mortar 1:4, 20 mm thick screed bed complete all as specified and directed.

Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed.

Brick work with sub class 'B' bricks old size straight or curved on plan exc 6m mean radius biult in cm 1:6 complete all as specified and directed.

All as per item above but except brick

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all as specified.

Rendering 15mm thick with CM 1:4 on fair faces of brick finishing fair and even without using extra cement complete all as specified and directed.

Rendering 15mm thick with CM 1:4 on other than fair faces of brick finishing fair and even without using extra cement complete all as specified and directed.

Preparing newly plastered surfaces and applying two coats of cement base paint over a coat of priming with alkali resistant paint complete all as specified and directed.

M & L for two coats of exterior emulsion (Apex) in surface including preparation of surfaces complete all as specified and directed.

M & L for Machine cut & polished smooth surface of kota stone slab 18-20mm thick as in skerting, including 15 mm thick cement mortar screed bed 1:4 fix in position etc complete all as specified and directed by Engr-in-charge.

M & L for Machine cut & polished smooth surface of kota stone slab 20-25mm thick as in flooring, including 20 mm thick cement mortar screed bed 1:6 fix in position etc complete all as specified and directed by Engr-in-charge.

M/s Rahul Kumar Agrawal

mohanlal gupta

M/S OMKAR SINGH YADAV

M/s Kok Singh Sisodia

M/S RAJENDRA KUMAR AGARWAL

M/S OM Enterprises

M/S SHRINATH CONTRACTION

M/S VIDIT ENTERPRISES

N.K. ENTERPRISES

M/S SHARADA ASOCIATE