supply and installation of Laboratory Equipments for the Department of Electrical Engineering

Digital Storage Oscilloscope • Bandwidth 100MHz • Number of Analog Channels : 2 • Real Time Sampling : +B13:B24 1 GSa/s(single-channel), 500 MSa/s(dual-channel), 250 MSa/s(three/four-channel) • Memory : standard more than 20Mpts (single-channel), more than 10 Mpts (dual-channel), more than 5Mpts (3/4-channel) • Vertical rage 1mV/div -10V / div • Horizontal Range 5ns/div to 50 s/div • Trigger : RS232/UART , I2C,SPI • Decode : RS232/UART,I2C,SPI • Math Function :Intg, Diff, Sqrt, Lg, Ln, Exp, Abs, AND , OR,NOT • Display : 7 inches WVGA TFT Display • Connectivity : USB Host and Device, LAN

200A AC / DC Clamp Meter • CAT III 600 V safety rating • 200 A AC and DC current measurement • 600 V AC and DC voltage measurement • 3000 Ω resistance range with continuity check • Zero function to allow the display to be cleared for DC measurements • Data hold function • 18 mm triangular jaw to allow for easy measurement in tight places • Large, easy-to-read display for easy viewing • Thin, Light, Compact body design for one hand operation

1000A AC Clamp Meter • CAT III 600 V safety rated • 1000 A AC current measurement • 30 mm jaw size for multiple applications • Resistance range upto 4kΩ • Slim, ergonomic design that is easy to carry and simple to use • Easy to read backlight display • Statement of calibration practices included • 2 years warranty

Portable digital Multimeter • Voltage, resistance, continuity, capacitance measurement • Input terminal for ac and dc current measurements to 10 A current • Diode test, data hold • Battery type 2 AA, NEDA 15 A, IEC LR6 • Battery life 500 hours minimum • Maximum voltage between any terminal and earth ground: 1000 V • Display (LCD) 4000 counts, updates 3/sec • Fuse protection for current inputs • Safety IEC 61010-1, IEC 61010-2-030 CAT III 600 V, CAT II 1000 V • Electromagnetic environment should confirm to IEC 61326-1

Insulation Resistance Testers • Multiple test voltages: 50 V, 100 V, 250 V, 500 V,1000 V (1507) • Remote test probe for rapid testing • Insulation test range 0.01 MΩ to 10 GΩ • Compare (Pass/Fail) function for repetitive tests • Automatic calculation of polarization index and dielectric absorption ratio • Live circuit detection feature preventing insulation test if voltage more than 30 V is detected • Auto-discharge of capacitive voltage • AC/DC voltage: 0.1 V to 600 V • Continuity function 200 mA in accordance with IEC 61557-4 • Resistance: 0.1 Ω to 20.00 kΩ • One year Warranty

Three Phase Transformer 5 KVA • All the primary and secondary winding terminals accessible • Apparent power: 5KVA • Input voltage:415V, Output voltage:220V Operating frequency :50 HZ • Conductor material: 99.9% pure Electrolytic copper • Insulation type: class H • Min. Full load efficiency: 90% • Operating temperature:(0-45) ◦C • Core material: CRGO silicon steel

Portable Three Phase Variac 5 KVA • Apparent power:5 KVA • Output voltage range:(0-500)V • Operating frequency :50 HZ • Min. Efficiency:92% • Core material: high grade CRGO silicon steel • Conductor material: 99.9% pure Electrolytic copper • Construction type: closed • High quality carbon brush used for current collection. • Output voltage variation should be smooth, continuous, break less & linearly proportional to angular rotation. • Should have negligible waveform & power factor distortion. • Should have excellent short time overloads capacity. • Should confirm to: I.S. 5142.

Single phase transformer 1 KVA • Apparent power:1KVA • Operating voltage:220/110V • Operating frequency :50 HZ • Insulation type: class H • Full load efficiency: 90% • Operating temperature:(0-45) ◦C • Core material: CRGO silicon steel • Conductor material: 99.9% pure Electrolytic copper

Three Phase Inductive Load Bank • With all the terminals accessible • Loading capacity:15kVAR (5kVAR each phase) • Loading voltage :415V ac • No. of steps:10 (500VAR each step)

Single Phase Low Power Factor Wattmeter (Analog) Measuring range (0-200) W • Pressure coil voltage rating 75,150 and 300V • Current coil rating: 1,4,5 A with 0.5% accuracy for 100 W and 200 W Wattmeters • Confirming to I.S. 1248 / I.E.C. 60051(Part 3).

Single Phase Low Power Factor Wattmeter (Analog) Measuring range (0-100) W • Pressure coil voltage rating 75,150 and 300V • Current coil rating: 1,4,5 A with 0.5% accuracy for 100 W and 200 W Wattmeters • Confirming to I.S. 1248 / I.E.C. 60051(Part 3).

Single Phase normal Power Factor Wattmeter (Analog) Measuring range (0-3000) W • Pressure coil voltage rating 75,150 and 300V • Current coil rating: 2,4,10,20 A with 0.5% accuracy for 3000 W Wattmeters • Confirming to I.S. 1248 / I.E.C. 60051(Part 3).

Rheostat • Current rating:10A, Range (0-50) ohm Material type: nichrome

Cut Section of Squirrel Cage Induction Motor • 3 HP, 400 V, 50 Hz, winding material: copper

TMS320F2812 DSP Development Board

Scientech Technologies Pvt Ltd

BIOMED SYSTEMS

LABORATORY SALES CORPORATION

BIOMED SYSTEMS

LABORATORY SALES CORPORATION

Master Mind Technologies