PROVN OF OFFICE ACCOMMODATION FOR LAO (A) AND LAO (B) AND RESIDENTIAL QUARTERS FOR DAD OFFICERS AND STAFF AT FEROZEPUR UNDER (WEST) FEROZEPUR CANTT

Amount

Note: Please refer Schedule 'A' Notes given on serial page No. 20 to 24 of tender documents.

LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS

Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from serial page No. 25.

Lump sum price worked out by the contractor for SITE CLEARANCE AND EARTH WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 26.

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 31.

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IV brought forward from serial page No. 32.

Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 34.

Lump sum price worked out by the contractor for ROAD, PATH AND CULVERT WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 35.

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS listed in Schedule 'A' Part-VII brought forward from serial page No. 36.

Lump sum price worked out by the contractor for SECURITY WALL FENCING AND GATE WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 38.

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IX brought forward from serial page No. 39.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-X brought forward from serial page No. 43.

Lump sum price worked out by the contractor for DG SET WORK as listed in Schedule 'A' Part-XI brought forward from serial page No.44.

Lump sum price worked out by the contractor for SUMMER APPLIANCE WORK as listed in Schedule 'A' Part-XII brought forward from serial page No.45.

Lump sum price worked out by the contractor for RAIN WATER HARVESTING WORK as listed in Schedule 'A' Part-XIII brought forward from serial page No.46.

INTERNAL ELECTRIFICATION WORKS

Supply and fixing modular metal flush box, 8 module complete all as specified and directed.

Supply and fixing modular metal flush box, 12 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 12 module complete all as specified and directed.

Supply and fixing modular ceiling rose, surface type with three terminals complete all as specified and directed.

Supply and fixing modular lamp holder PVC/Polycarbonate type with back plate suitable for battten fitting complete all as specified and directed.

Supply and fixing energy efficient LED bulb, B22, 9 watt complete all as specified and directed by Engr-in-Charge.

Supply and fixing decorative 9 watt LED wall mounting fittings complete including 9 watt LED lamp complete all as specified and directed. Cat Part No. LHFOECEITZBO14 glaze wall light of Havells or equivalent in Phillips/Crompton.

Supply and fixing GI pipe bracket made out of 1.5 mtr long GI pipe light grade 32 mm dia and bend to shape fixed with MS clamps made out of MS flat iron of size 32 mm x 4 mm thick with nuts & bolts, washers complete all as specified and directed.

Supply and Fixing distribution board made out of CRCA sheet DB vertical type double door VTPN 4 Way MS sheet having provision of MCCB as incomer and MCB TPN/SPN/SP as outgoing and 200 Amps copper bus bar including fixing in the wall,cutting chases grounting and necessary patch work and white wash to match with the existing including making connections all as directed . Note:- MCCB , MCB TPN/SPN/SP will be measured and paid separately. Connection from MCCB to bus bar will be made with Aluminium Strip and thimble of suitable size all as directed.

Supply and Fixing distribution board made out of CRCA sheet DB vertical type double door VTPN 8 Way MS sheet having provision of MCCB as incomer and MCB TPN/SPN/SP as outgoing and 200 Amps copper bus bar including fixing in the wall,cutting chases grounting and necessary patch work and white wash to match with the existing including making connections all as directed . Note:- MCCB , MCB TPN/SPN/SP will be measured and paid separately. Connection from MCCB to bus bar will be made with Aluminium Strip and thimble of suitable size all as directed.

Supply and fixing MCCB, 100 Amps, 4 pole , 415 volts thermal adjustable and magnetic release breaking capacity 16 KA, complete all as specified and directed.

Supply and fixing MCCB, 125 Amps, 4 pole , 415 volts thermal adjustable and magnetic release breaking capacity 25 KA, complete all as specified and directed.

INTERNAL WATER SUPPLY WORKS

Supply and fixing 15 mm bore CP health faucet for EWC screwed both ends with all fittings, fixed complete all as specified and directed.

ROAD, PATH AND CULVERTS WORKS

EXTERNA WATER SUPPLY WORKS

Cutting of cast iron pipes 100 mm bore and reducing to required length before laying and insertion of new reducing Tee (100 × 100 × 80 mm) complete all as specified and directed. Note: Excavation and earth work required for execution of work against this item is deemed to be included in the quoted rate.

Material and labour for construction of valve pit brick masonry size cm 60 cm x 60 cm x 60 cm (internal dimension) including necessary excavation earth work, PCC 1:4:8 type D-2, brick work in CM 1:4 , 15 mm thick internal plaster in CM 1:4, frame of angle iron 40 mm x 40 mm x6mm, MS sheet cover 3 mm thick, all MS work painted with two coats of synthetic enamel paint for over a coat of red oxide primer complete all as specified and directed.

EXTERNA ELECTRIFICATION SUPPLY WORKS

Supply, fixing and testing LED security light fitting 60 watts die-cast aluminium housing,IP 65 protection including 1.5 sqmm 3 core multistrandard Copper conductor cable and UPVC pipe 15 mm bore from Junction box to street light fitting including 2 Nos clamps made out of MS Flat of size 25×6 mm complete with all accessories including 40 mm dia GI Pipe light grade 1.2 m long bracket duly cutted and welded at an angle of 120 degree and FI 25×6 mm clamp 2 Nos with bolts,nuts,and washers complete all as specified and directed. Cat Part No LHETBXU7PA7B060 of Havells or equivalent Crompton/Philips/Bajaj

Material and labour for lighting Junction box made of thermoplastic, with IP 66 degree of protection, dust proof, water tight, light weight, Acid resistant, Corrosion proof, insulated and shock proof, fire retardant , self extinguishing, Halogen & Silica free non- Toxic material,UV resistant with internally embedded Gasket, size of (130 x 180 x 77 mm ) fitted with required 1 no 4 way terminal. The product should hold type test certificates and verification by glow-wire test in accordance with IEC60695-2-11.Cat no-DK 1010G ( Make Hensel) with 6 Amp MCB SP neutral link with suitable copper busbar for connection of 10 Sqmm cable complete all as specified and directed.

Supply, installation, commissioning and testing of LT Outdoor type panel board (factory made of approved CPRI) not less than 150 cm x 100 cm x 50 cm mounted outdoor made out of CRCA sheet 3.15 mm thick dust proof, powder coated from both side, individual door, factory locking system with two side ventilation suitable for working on 415 volt AC supply including bus bar chamber and Aluminium bus bar of capacity 300 Amps rating for phase and neutral mounted on hygroscopic insulator fixed in a separate bus bar chamber separate compartment for incoming and outgoing feeder prewired with suitable size of copper conductor cable including fitted on 50x50x6mm angle iron frame with PCC foundation in cement concrete 1:2:4 and provision of lugs and bushing for housing the following for Auditorium bldg and SL :- (i) Electrolite Aluminium bus bar 300 amps for phase & neutral-04 Nos (ii) MCCB 4P 160 Amps, 36 KA- 01 Nos (In coming) (iii) MCCB 4P 100 Amps, 16 KA - 02 No. (iv) MCCB 4P 63 Amps, 16 KA - 02 No. (v) Multi functional digital Voltmeter and ampere meter including suitable and appropriate CTs-01 Set (vi) Indicator lamp (LED R-Y-B)- 01 Set

Supply, installation, commissioning of capacitor bank built in LT panel board, 3 phase 415 volt outdoor type made out of 3.15 mm thick CRCA sheet and suitable for fixing Ultra heavy duty capcitors 100 KVAR contactor, APFC relay and power factotr meter, makin bank connection with suitable size of copper wire CTR copper bus bar using MS angle, PCC foundation with 1:2:4 type CI with 20mm graded stone aggregate, thimble/ gland cable entry boxes with cable gland including locking arragnement, painting the panel with two coats of synthetic enamel paint over a coat of red oxide primer complet with the following accessories:- (a) MCCB 4 pole 250 Amps of 36 KA-01 No Make Seimens/HPL/Havells/L&T/Legrand (b) Ultra Heavy Duty Capacitors 100 KVAR 6 step (25+25+25+15+5+5) Make Seimens/HPL/Havells/L&T/Legrand. (c) Thyrister switch- 01 No Make Seimens/HPL/Havells/L&T/Legrand. (d) Power Factor meter-01 No Make Seimens/HPL/Havells/L&T/Legrand (e) MCB TP 100 Amps and indicate lamp - 05 Nos Make: Seimens/HPL/Havells/L&T/Legrand (f) Indicator lamp RYB (Set of three) 01 Set Make: Seimens/HPL/Havells/L&T/Legrand (g) Power factor relay (h) Multi functioning digital Meter including CT as per requirement. (j) CT coil 3 Phase 50/5 ratio

Supply, installation, commissioning and testing of LT Outdoor type panel board (factory made of approved CPRI) not less than 150 cm x 100 cm x 50 cm mounted outdoor made out of CRCA sheet 3.15 mm thick dust proof, powder coated from both side,double bus bar panel, individual door, factory locking system with two side ventilation suitable for working on 415 volt AC supply including bus bar chamber and Aluminium bus bar of capacity 600 Amps rating for phase and neutral mounted on hygroscopic insulator fixed in a separate bus bar chamber separate compartment for incoming and outgoing feeder prewired with suitable size of copper conductor cable including fitted on 50x50x6mm angle iron channel with PCC foundation and provision of lugs and bushing for housing the following for Auditorium bldg and SL (LT Panel 1) :- (i) Electrolite Aluminium bus bar 600 amps for phase & neutral-04 Nos (ii) MCCB 4P 315 Amps, 36 KA- 01 Nos (In coming) (iii) MCCB 4P 160 Amps, 16 KA - 02 No. (iv) MCCB 4P 63 Amps, 16KA -03 Nos (v) Change Over Switch 125 Amps 4 Pole - 01 No (vi) Multi functional digital Voltmeter and ampere meter including suitable and appropriate CTs-01 Set (vii) Indicator lamp (LED R-Y-B)- 01 Set (viii) Digital timer switch -01 set

DG SET WORKS

Supply, installation, commissioning and testing of eco-friendly Static type Diesel Engine driven generating set silent type conforming to CPCB condition/norms, 100 KVA 415 volts (AC 3 phase,4 wire system of supply) 50 Hz at 0.8 power factor directly coupled alternator & engine, water cooled, mounted on common base plate of rigid fabricated mild steel frame platform with floor mounted fuel tank & including all excavation PCC foundation anti vibration pads/ dampers including standard control panel other accessories as per manufacturer's design.The Gen set should be fitted with integrated accoustic enclosure manufactured by the OEM of the Generating set .The Generating Set and accoustic enclosure shall conform to emmision norms and noise level.The accostic enclosure shall be type tested and certificate obtained for the type approved from approved agencies listed in Govt Notification.Specifications of DG set shall be as specified and and comprising of the following:- (A) ENGINE (Prime mover) : Diesel engine vertical type of adequate capacity for 100 KVA ,1500 RPM (conforming to IS: 4722/BS:5514) of suitable BHP as per manufacturer recommendation,Turbo charged water cooled ,12 volts electric battery start, complete with fly wheel and all standard fittings/fixtures as per manufacturer instructions including suitable engine control panel/dash Board with electronic techometer.Lubrication oil temperature & pressure gauges water temp gauge and frequency meter (digital type) including safety automatic shut down in case of fault such as high water temperature low oil pressure,over speed etc including self starter,alternator,coggedV belt,fuel tank with first fill of lub oil and coolant(as applicable) etc complete all as specified. (B) ALTERNATOR: Aternator AC ,3 phase 415 volts 4 wire rated line current for output 100 KVA,PF 0.8 1500 RPM confirming to BS 5000/ IS 4722. Insulation class enclosure/SPDP self excited, self regulated brushless, complete with AVR with +1% voltage regulation directly coupled with above engine. (i) Anti vibration pads for mounting engine and alternator assembly on the base frame/plate or as recommended/provided by the manufacturer (ii) Base frame made out of structural steel as per manufacturer's recommended. design/specifications.

RAIN WATER HARVESTING WORKS

Material and labour for Trial bore of 300 mm dia upto 200 meter depth below ground level in any kind of soil strata including hard stone/ boulder etc. complete all as specified and directed.

Supply and fixing UPVC pipes (SCH-40) 160 mm bore including all necessary fittings etc. complete all as specified and directed.

Supply and fixing perorated/slotted UPVC pipes (SCH-40) 160 mm bore including all necessary fittings etc. complete all as specified and directed.

Material and labour for filling 6 mm to 12 mm size pea gravels around UPVC pipe complete all as specified and directed.

Material and labour for filling 4 mm to 6 mm size pea gravels around UPVC pipe complete all as specified and directed.

Material and labour for filling 2 mm to 4 mm size pea gravels around UPVC pipe complete all as specified and directed.

SUMMER APPLIANCES WORKS

Supply Installation testing and commissioning Steel Body 18 SWG Desert cooler electric driven (single phase) 230V, 50Hz, Air delivery 4000 Cum/Hr, 450mm sweep cooler fan three speed (H.M.L); Make of fan bajaj/Khaitan/Crompton/ Havells including water pump, wood wool pad of proper thickness will be provided in each panel, 3 core flexible cable PVC Shethed insulated cable as per requirement and three pin 15 Amp top ISI marked shall be provided complete as as specified and directed.

Supply and fixing voltage stabilizer for automatic operation, single phase naturally air cooled indoor type with copper wound, designed for input voltage between 170 volts to 250 volts with output voltage stabilized at 230 volt with accuracy of + 2.5% and of capacity 4 KVA with low and high voltage cut off for 2 to 3 minute time dealy relay complete all as specified and directed.

ARBORICULTURE WORKS

Material and labour for digging out pits of suitable size ( Not less than 400 mm dia and 500 mm deep ) in soft/loose soil manually and / or with auger and supplying and planting the follwing healthy saplings/shrubs of height as specified in the pits with prepared mix of earth with cow dung, neem khali bone meal, DAP and chloropyrophos in the proportion as specified/directed complete by the Engineer-in-charge.

Gulmohar (Min heigjht 1.5 metre)

Bottle Palm (Min heigjht 1.5 metre)

Aestonia (Min heigjht 1.5 metre)

Ashoka (Saraca asoca) (Min heigjht 1.5 metre)

Guavba (Allahabad Vanty) (Min heigjht 1.5 metre)

Ficus Bijamina (Min heigjht 1.5 metre)

Supplying and planting of Duranta, Lantane Lalsa and Aclipa (Min height 25 Cms) after preparation of formation around the periphery of area complete all as specified and directed. Note: (i) Grass planting shall be measured and paid for separately under respective item. (ii) Flat area of land shall be measured.

Supply and fixing galvanized steel water tubing, 25 mm bore, medium grade, ISI marked, laid under floors, fixed to walls, and/or on ceiling surfaces or in chases including providing all pipe fittings as required complete all as specified and directed.

Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 25 mm bore iron pipe and fixed in position complete all as specified and as directed.

Buildtech India

M/s Arihant Builders

SAR AGENCIES