SPECIAL REPAIRS TO BUILDINGS OF CERTAIN UNITS AT CQA (ICV) YEDDUMAILARAM UNDER GE GOLCONDA

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each (without taking of stutter from the frame) complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from frame) n. exc. 1.5 sqm each complete all as specified and as directed.

Taking up or down steel tubing 15 mm dia and connections complete all as specified and as directed.

Taking up or down steel tubing 20 mm dia and connections complete all as specified and as directed.

Taking up or down steel tubing 25 mm dia and connections complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa , 150gsm as in roof covering/cladding to wall, fixed with self tapping screws including dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa, 150 gsm as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

S & F roof purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410-W (Gde E-250) quality B complete all as specified and as directed.

M & L preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Cement concrete 25 mm thick in type B-0 1:2:4 (12.5mm graded aggregate) as in base complete all as specified and as directed.

M & L screed bed or bedding layer of mortar 1:4, 15mm thick for laying floor finishes, cooking platform all as specified and directed.

S & F in repairs for wash down water closet (pedestal pattern) with seat cover PVC connections 15mm size with PTMT nuts of length 450mm length including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density of PVC, 32 mm dia for low level cistern complete all as specified and as directed.

S & F in repairs for vitreous China wash basin, white, flat back, of size 550 x 400 mm including cutting for and pinning in ends of brackets or erecting stand, PVC connection 15 mm size with PTMT nuts of length 450 mm, 15 mm bore pillar taps, cast copper alloy with capstan heads, 32 mm bore waste coupling of PTMT (min wt 45 gms), 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6kgf/sqcm of 1 m length, 15 mm stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and as directed.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F for glazed/gauzed II class hardwood 30mm thick skelton shutters open rebated and prepared to receive glass, gauze etc divided in to squares with sash bars plain chamferedor rounded, mitred and rebated sash bars complete all as specified and as directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing in squares n.exc. 0.5sqm in each pane complete all as specified and as directed.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and as directed.

S&F of 100mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S&F MS barrel tower bolts of extruded section and length of bolt 100 mm complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and as directed.

M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces of Walls and applying Two coat of distemper oil emulsion including a coat of 1.5 mm thick layer wall care putty complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces of ceiling and applying Two coat of distemper oil emulsion complete all as specified and as directed.

M/L Preparing the plastered or unplastered old decorated surfaces of walls including scrapping down old paint and applying Two coat of cement base paint complete all as specified and as directed.

S & F 2000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of 20 mm dia Ball brass valves, high pressure, with polythene float and flynut and Dismantling old PVC water tanks exc 1000 but n exc 2000 ltrs capacity and removing complete all as specified and as directed.

S & F of 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in down stream complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection including necessary form work all as specified and as directed.

M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ and thickness of concrete 75mm complete all as specified and directed.

M & L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of makrana white type complete all as specified and directed

S&F Fixed in repair for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fixing of Steel rolling shutters,1.25mm thickness of laths with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, but gear operated type with bevel gear box and crank handle complete all as specified and as directed.

S&F of ball bearing of suitable size for Rolling Shutter complete all as specified and as directed.

S&F in repair stainless steel curtain rod 25 mm dia including set of brackets (side/corner) for every 1.5 Running meter including taking off the old articles (Pelmets/wooden/ arrangement of curtain), plugging up new key holes, making good the dusturbed surface and painting one coat on disturbed surface as required complete all as specified and as directed.

S&F Gypsum Board 12mm thick ceiling including provision of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and provision of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling of wall and ceiling boards fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed.

M & L reinforced cement concrete M-25 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L TMT bars below 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatter and flat rough finished surface of concrete complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab not exc. 200 mm thick for fair finished surface etc complete all as specified and as directed.

M&L 12 mm thick pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified and directed.

S&F Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and directed.

S&F 140 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing in squares exc. 0.5sqm in each pane complete all as specified and as directed.

S&F of Steel grill rolling shutter with gear operated type including necessary accessories as per IS 6248-1979 all as specified and directed

M&L for Providing, cement concrete Type B1 1:2:4 20mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges of roof covering and brick wall complete all as specified and as directed.

M & L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 10cmx10cm at the junction of roofing to vertical surface all as specified and as directed.

M & L 100 mm thick plain cement concrete 1:4:8 Type D-2 (Using 40 mm graded aggregate) as in sub base of floor complete all as specified and as directed.

M & L plain cement concrete of type B1 1:2:4 (20 mm graded aggregate) as in string cources, lacing cources at the edges of interlocking tiles to fill the gaps to prevent dislodging of tiles including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M &L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment including setting & jointing the blocks over 50 mm thick sand cushioning complete all as specified and directed.

Dismantling posts or struts (wood, steel, brick work, masonry, stone etc) any section including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss all as specified and directed.

Excavating in post holes in any soil, each n.exc 0.5 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with each around in layers not exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, 3.15mm thickness of wire and 70x70mm size all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including dismantling fencing wire mesh, any type complete all as specified and as directed.

M & L Cement concrete Type C2 1:3:6 (40 mm graded aggregate) as in foundations,filling and mass concrete complete all as specified and as directed.

S & F of Grade Fe 410-W (Gde E 250 quality B ) Joist, Channel, angle, or Tee sections fixed independently without connecting plates etc all as specified and directed

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and as directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut of diameter of neck 5 to 10 mm, length of bolt n.exc 50mm complete all as specified and as directed.

S&F of Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Material and Labour for preparation of old plastered / decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.

S & F 150 mm Aluminium anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and Fixing in repairs PVC valveless, symphonic action type flushing cistern, 10 ltrs, low level, white, with inlet, ball valve, float and handle including brackets and PVC connection complete all as specified and directed..

Supply and Fixing in repairs vitreous china squatting pan “Orissa’ pattern size 580 x 440 mm white with integral foot rests including provision of lime concrete bed and taking out the existing one Make Cera or equivalent complete all as specified and directed (Colour and size all as approved by Engr-in-Charge)

S & F in repair Bowl for Extended Wall Hung WC with PP soft close seat cover, Hinges, Accessories Set, Size:370 x 650 x 765 mm Make Jaquar model No FLS-WHT-5351 and cistern fittings make Jaguar model No FLS-WHT-5301 suitable for the same or equivalent complete all as specified and directed (Colour and size all as approved by Engr-in-Charge)

S&F in repair cistern with cistern fittings make Jaquar model No FLS-WHT-5301 suitable for EWC model No FLS-WHT-5351 or Equivalent complete all as specified and directed by Engr-in-charge (colour and size complete all as specified and as directed.

S & F 20mm bore threadless UPVC pipes SDR 11 & Plain UPVC SDR 11 fittings on walls / ceiling or laying in floors complete including required Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good cutting exc 10 cm but not exc 20cm girth complete all as specified and as directed.

S & F 20mm bore brass elbow complete all as specified and directed.

S & F 20/15mm bore brass elbow complete all as specified and directed.

S & F 20mm bore brass tee complete all as specified and directed.

S & F 32mm bore brass threadless UPVC pipes of pressure rating 10 kgf/sq.cm with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S & F in repair 15mm dia fancy type chromium plated bib taps straight line model with wall flange complete all as specified and directed. Make Jaquar model FLR-5047N or equivalent complete all as specified and as directed.

S & F in repair Pillar cock, 15mm dia cast copper alloy, chromium plated fancy type complete all as specified and directed. Make : Jaquar model FLR-5011N or equivalent.

S & F in repair angular stop cock with flange, 15mm dia cast copper alloy, chromium plated fancy type complete all as specified and as directed. Make : Jaquar model FLR-5053N or equivalent.

S & F in repairs vitreous china bowl urinal all fittings except stopcock of make: Jaquar Model URS-WHT-1326 Urinal, Size : 355 x 340 x 535mm and Fixing Accessories Set or equivalent (Colour and size all as approved by Engr-in-Charge) complete all as specified.

S & F in repair 15 mm dia cast copper alloy, chromium plated fancy type Urinal Valve Auto Closing System with Built-in Control cock & Wall Flange Make : Jaquar model PRS-077 or equivalent all as specified and directed.

S & F Urinal Partitions Make : Jaquar Rectangular Shaped with frosted glass 8mm / 10 mm thick finish : Chrome Model No. 1810-US/1810-US JSE-CHR-110US050X Height 900mm x width 450mm or equivalent all as specified and directed

S & F in repairs Wash Hand basins, wall hung with fixing assys Size : 565 x 440 x 210mm Make : Jaquar Model No. FLS-WHT-5801 with Full pedestal Model FLS-WHT-5301 for FLS-WHT-5801 or equivalent all as specified and as directed

S & F for waste coupling stainless steel 32 mm Make : Jaguar model No ALD-CHR-709 or equivalent all as specified and directed

S & F PVC connections 15mm size with PTMT nuts of length 900mm complete all as specified and directed.

S & F for PVC waste pipe connections of 32mm for WHB / urinals complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F CP tubular towel rail, 20mm dia 60 cm long with between flanges complete all as specified and directed.

S & F Chromium plated soap dish fixed to walls with chromium plated brass screws in bath rooms and for wash hand basins complete all as specified and directed.

S & F for SWR pipe, sand cast type in any length with and without ear with cement joints laid in floor or in wall clamps, 110 mm bore of pipe complete all as specified and directed including dismantling of old pipes.

S & F for SWR, bends (any radius) diminishing and tapers (large bore to be measured ) with oval access door fitted to 110 mm bore of pipe complete all as specified and directed.

S & F for 110mm dia bore PVC (SWR) vent cowl, complete all as specified and directed.

S & F of 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in rising complete all as specified and directed.

S & F Factory made fully glazed panel UPVC ventilator/ window shutter with 4mm thick figured glass alongwith frame and all necessary fittings, all of standard dimension complete all as specified and directed.

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

Dismantling Stone slabs and tiles of any description or thickness in floors, shelves, aprons laid bedded and pointed in any mortar complete all as specified and as directed.

Dismantling of ceiling /wall panelling including frame work and board complete all as specified and directed by Engr-in-Charge.

Taking down Aluminium chowkats or frame exc 1.5Sqm but n.exc 4 Sqm each with shuuter( without taking off shutters from the frame and removing to or from store and making good the surface of the opening complete all as specified and as directed.

Demolition and breaking up 100mm dia drain pipes (salt glazed wire AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) of any description and any position not otherwise provided complete all as specified and as directed.

M&L Vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in floor 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed complete all as specified and directed

M&L Vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in vertical surfaces such as skirting, dados and riser to steps over 10mm thick backing coat in cement plaster 1:3 finished even and fair to receive tiles complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in flooring, steps, jambs, pillars, window cills, cooking plat- forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix- ture of pigment to match with shade of granite and incl chamfeirng/rounding the edges over 15mm thick cement screed in CM 1:4 complete all as specified and as directed. (Colour and design approved by Engr in charge).

M&L for Coloured printed Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed (colour & design approved by Engr -in-Charge).

M&L for Coloured printed Glazed ceramic tiles on vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and as directed (colour & design approved by Engr -in-Charge).

M&L for Linoleum 2mm, plain coloured flooring sealed down with an approved adhesive incl strethcing, cutting and fitting all as specifed and directed.

M&L for Plain Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete.

M&L for screed bed or bedding layer, 20 mm thick in cement morter (1: 6) for laying Granite/Kota stone on floor surface complete all as specified and as directed.

M&L for 10 mm thick plastered surfaces in 1:3 cement mortar, to receiving tiles/kota stone on vertical surfaces as specified as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match shad of the slab including rubbing and polishing , wax polishing of machine cut kota stone slab flooring complete including necessary joint filling etc. complete all as specified and as directed.

All as per Sl item No. 113 above but as in skirting, steps, dado and pillars etc all as specified and as directed.

M&L RCC type M25 (20 mm graded aggrigate) for slab supported on walls,beamand cloumn in floors, roofs, landing, shelves etc all as specifed and directed.

Use & waste of formwork to sides and soffits of slab n exc 200 mm thick complete all as specified and as directed.

M&L for rendering CM (1:6) 15 mm thick on fair faces of brick work or concrete surfaces or for laying floor finishes even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering CM (1:3) 5 mm thick on ceiling, soffits etc of brick work or concrete surfaces surface even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for preparation of new surface and applying three coat of white wash on ceiling all as directed and specified.

M&L for two coats of oil bound distemper on newly plastered surfaces over & including 3mm thick wall care putty on wall including preperation of surfaces complete all as specified and as directed.

M&L for washing rubbing down and preparation of old surface and applying one coat of OBD on wall including a thin layer of wall putty complete all as directed and specified.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as directed and specified.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

M&L rendering 10mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement with IWPC @ at 3% (IWPC measured separately) as in roof slabs complete all as specified and as directed.

M&L Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) and APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application and including one coat of bituminous based aluminium paint complete all as specified and as directed.

M&L for preparation of new concrete surface of any description, over 10 cm in width or girth, and applying two coat of synthetic enamel paint over a coat of priming paint plaster not otherwise described complete all as specified and as directed.

S&F steel water tubing, 15mm dia, galvanised, medium grade, ISI marked with and including all fittings and fixed on walls and ceilings or laid in floor complete all as specified and directed.

S&F steel water tubing, 20mm dia, galvanised, medium grade, ISI marked with and including all fittings and fixed on walls and ceilings or laid in floor complete all as specified and directed.

S&F steel water tubing, 25mm dia, galvanised, medium grade, ISI marked with and including all fittings and fixed on walls and ceilings or laid in floor complete all as specified and directed.

S&F 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. ( minimum weight 142 gms) complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia complete all as specified and as directed.

S&F PVC SWR bends 110 mm dia complete all as specified and as directed.

S&F PVC SWR bends 75 mm complete all as specified and as directed.

S&F PVC SWR Branch piece 75 mm double (Double T) provided with access door equal or unequal complete all as specified and as directed.

S&F 110 mm PVC SWR Junction single (Single T) provided with access door complete all as specified and as directed.

S&F PVC SWR vent cowl of size 110 mm complete all as specified and as directed.

S&F PVC SWR vent cowl of size 75 mm complete all as specified and as directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc. complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and as directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC Doors complete all as specified and as directed.

S&F 125 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 125 mm length of extruded aluminium alloy handles, fabricated type, anodised

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed all as directed

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed all as directed

S & F 150 mm long Aluminium alloy handles, fabricated type, anodised all as directed.

S&F in repair door closer hydraulically regulated designation No 3, aluminium (Die cast )body universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 36 to 60 kg and fixed complete all as specified and as directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F in repair for 40 mm dia cup board knob fixed with nut screw and washers of brass complete all as specified.

S&F in repair 75 mm size Hasp and staple, safety type, aluminium anodised fixed with screws complete all as specified and as directed.

S&F Anodised aluminium powder coated frame for doors and windows with one or more rebates incl joining cleat for fixing etc complete all as specified and as directed.

S&F for anodised aluminium powder coated window and ventilators shutters side hung shutter without sash bar aluminium section weighing 0.55 kg/m incl necessary joining cleats glazing clips rubber packing anodised alu snap beading secrews alu anodised fittings such as peg stays 150mm long 91 No) hinges type B-21 100mm long (2 no) suitable handle comlete all as specifed and directed by engr-in-charge.

S&F for anodised aluminium powder coated (Thickness or powder coating not less than 50 micron) door shutters aluminium section weighing 0.55 kg/m incl necessary joining cleats glazing clips rubber neoprene packing handle 02 nos in each door, hinges, anodised aluminium snap beading screws etc. comlete all as specifed and directed by engr-in-charge.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement based paint on surfaces of walls complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection/path including necessary form work all as specified and as directed.

Taking down Aluminum chowkats or frame exc 4 Sqm each with shuuter( without taking off shutters from the frame and removing to or from store and making good the surface of the opening complete all as specified and as directed.

S & F false ceiling of mineral fiber ceiling tiles, including Snap Grid with hot dipped galvanised steel grid work, surface chemically cleaned capping finished in baked polyester paint, Main tees of size 33 (H) x 24 mm every 1.2 m c/c, stiched cross tee at 0.6 m c/c to form a grid of size 600 x 600 mm and suspending the grid from RCC roof using 3 mm GI rod, 6mm nylon raw plug and 6mm J bolt at every 1200 mm intervals and M&L for mineral fiber acoustic ceiling tiles of size 600 x 600 x 12 mm OCR. Light reflection of > 85%, Noise Reduction Coefficient (NRC) of 0.55 to 0.60. Humidity resistance up to 99% at 50 °C complete all as specified and as directed.

Taking out of existing water proofing treatment if any complete on roof surface and surface properly cleaned complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Wall mounted EWC with concealed flushing system and cover complete all as specified and directed by engr in charge Make : ONS-WHT-10853S300UFSM of Jaquar or equivalent ( Colour and szie all as approved by Engr in charge) complete all as specified and as directed.

S & F in repairs vitreous china bowl urinal all fittings except stopcock of make : URS-WHT-13257 of Jaquar or equivalent Urinal with sensor and Fixing Accessories Set ( Colour and szie all as approved by Engr in charge) complete all as specified.

S & F in repairs of vitreous china wash basin table top venity type, with all fittings except pillarcock & stopcock of make :CNS-WHT-903 of Jaquar or equivalent basin with sensor and Fixing Accessories Set ( Colour and szie all as approved by Engr in charge) complete all as specified and as directed.

S & F in repairs towel rails chromium plated of 20mm dia and 600mm long complete all as specified and directed. Make : Jaguar ( ACN-CHR-1111SM) complete all as specified and as directed.

S & F repair CP towel ring of Make-ACN-CHR-1121BN of Jaquar or equivalent. complete all as specified and directed.

S & F repair CP Soap dish of Make-ACN-CHR-1131N of Jaquar or equivalent. complete all as specified and directed.

S & F repair CP paper holder of Make-AHS-CHR-1553 of Jaquar or equivalent. complete all as specified and directed.

S & F repair corner glass shelf with bracket of Make-ACN-CHR-1173 of Jaquar or equivalent. complete all as specified and directed.

S & F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe all as specified and directed.Make-QQT-CHR-7273UPR of Jaquar or equivalent

S/F in repairs single lever basin mixer with popup waste system complete all as specified and as directed. Make - SOL-CHR-6191 of Jaquar or Equvlent.

S & F in repairs 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed. . Make - ALD-CHR-769L250X190 of Jaquar or Equivalent

S & F in repair hand shower( health faucet ) with 1.2 m long easy flex tube in chrome finish and wall hock Make-Jaquar (ALD-CHR-563) or equivalent complete all as specified and directed.

.S&F in repair 32mm bore mild steel chromium plated waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge. Make-Jaquar (ALD-CHR-709) or equivalent

S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.Make-Jaquar (BSH-CHR-1751) or equivalent

S&F 15mm bore PVC connection 450mm long with brass nuts on both ends complete all as specified and as directed. Make-Jaquar (ALD-CHR-805B) or equivalent

S&F in repair 15mm dia fancy type chromium plated stop valves with long shank and cup screwed for iron pipe or for union.Make-Jaquar (FLR-CHR-5053N) or equivalent complete all as specified and as directed.

S&F 5.00mm thick tinted glass fixed with & incl PVC/neoprene gasket, angular glazing alu beads, rubber packing locking arrangement for sliding windows/door complete all as specifed and directed.

S&F aluminium grill stain finish fix to window with F/Y channel as per Deco grill cat No DG-102, DG-103,DG-104,DG-117 complete all as specified and as directed.

S&F in repair stainless steel curtain rod 20 mm dia including set of brackets (side/corner) for exc.1.0m and n.exc 1.5 m,taking off the old articles (Pelmets/wooden/arrangement of curtain), plugging up new key holes, making good the dusturbed surface and painting one coat on disturbed surface as required complete all as specified and as directed.

S&F framless glazed facede as per IS 875 Part3 requirement suspended from the top of the opening incorporating toughened glass panels not less than12 mm plain toughned glass ( to cover the total clear opening maximum to 3000 x 2500 mm appx ) all as specified and as per manufecturers instructions as per approved drawings, used to each verticle joint to provide lateral stiffness against wind loading. deflection and other specified loads expected including frame work whereever necessary and hardwere all other accessories in the glazing with all extrusions, fittings,suspension brackets, locking arrangement,Floor spring, handle made of CP material length Exc 300mm and n.exc 400mm, 15-20 mm dia 2Nos in each leaf, spider etc AUSTAVISION / SADEV / STANLEY make with fittings of DORMA /AUSTAVISION / SADEV / STANLEY make with 4, 2 points spiders & stainless steel bolts as per design.All as specifed and as directed.

S&F of 4mm thick aluminium composite panel fixed vertically with column of concrete or brick work alongwith fixing arrangement complete all as specified and as directed.

S&F false ceiling canopies (Hill and valley) type which are 12mm thick glass fibre panal arc fixed radiuous .complete all as specified and as directed. make: Armstrong, Gypprock, Gypsum India

Taking down carefully aluminium point wiring any type for (light, fan, socket or power) with all fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, light fittings, etc, removing materials to taking credit and making good disturbed surfaces of walls, ceilings, etc complete all as specified and directed by Engineer-In Charge.

M&L Point wiring for one light point/fan point/Exhaust fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed at site .

All as per item no.190 but One 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed by the Engr-in-charge.

All as per item no.190 but One 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed by the Engr-in-charge.

All as per item no. 190 but for One 3/5 pin 15 / 16 Amps switch socket outlet point on independent board with 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed by the Engr-in-charge.

S & F, Switch Piano, flush type, single pole, one way, 5 Amps, 240 Volt complete all as specified and directed by Engineer-In Charge. Make : Anchor / Havells/Legrand

M&L switch Piano, flush type, single pole, one- way, 15/16 Amps complete all as specified and directed at site.

M&L socket outlet, flush type, 5/6 Amps, multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed at site.

S & F socket out let, 2 in 1, 5 and 15 Amps, flush type, universal ISI marked complete all as specified and directed by Engineer-In Charge. Make : Anchor / Havells/Legrand

M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed at site.

M&L Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site.

S&F sheet metal enclosures for TPN DB 4 way MCCB I/C of 100 Amps double door with 200 Amps rated bus bar, IP - 43 protection, shrouded neutral bar& bus bar, cement spill protector, 415 Volts complete all as specified.[Note : MCCB will be measured and paid seperately under relevant items].

M&L MCCB 415 Volts, 4 pole, fixed type, 100 Amps, with breaking capacity 16 KA complete with all connected accessories including taking out old U/S one all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

S & F MCB SPN, 240 V, 32 Amps/40Amps, 'C' series, complete all as specified and directed by Engineer-In Charge.Make : C&S/Scheinder/Legrand

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 AMP, in the MCB DB Complete with connection testing and commissioning.

Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc.

S&F Aesthetically designed LED wall bracket light with B22d lamp holder including necessary connection all as specified and directed. Make : Halonix Cat No.HHW048 08CF RF 02 or equivalent as approved by GE from list of approved makes.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

S&F 36W recess mounting ultraslim LED flat panel 2'x2' made of extruded aluminium frame with high efficient LEDs & glare free opal diffuser, IP20 suitable for armstrong/grid ceiling and making connections with twin twisted unsheathed PVC copper cable of suitable size complete as directed.

Supply & Fixing only street light 40 watt LED fittings complete with driver and , suitable for mounting on 40mm or 50mm dia. GI mast or bracket arms with pole fixing attachments complete all as specified and directed.

S&F LED hanging light (Bar Pendant) fittings 1x25watts, 230 volts, with LED including driver 1x20 Watts, with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanized steel earth lead 4 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 5 connected to earthing test point including testing on completion all as directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth lead connected to test point max 7.5 mtr as per site requirement, PCC 1:3:6 type for earth pit , CI cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 25 mm dia for supporting of earth lead .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation, laying of poles in trenches and getting out in hard/dense soil complete all as directed and specified.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as all as specified and directed.

Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a lvevel not exceeding 1.5 mtrs above from the starting point complete all as all as specified and directed.

Supply and spread approved dry river sand for cable laying /foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as all as specified and directed. Note:- Punned thickness will be measured for payment purpose.

M&L for Laying GI tubing 40 mm light grade with all fittings for cable protection fixing on poles & road/drainage crossing complete all as specified and directed by Engr-in Charge.

M&L for Surface conduit point wiring complete with FRLS PVC insulated, unsheathed cable 1100 V grade conforming to IS-694, 1.5 sqmm (nominal area) multi-stranded with new metalic rigid PVC conduit medium grade not less than 20mm dia (ISI marked ) and conduit accessories fixed on 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc, including provision of FRLS PVC insulated, unsheathed multistranded copper conductor of size 1.5 sqmm as earth dolly complete all as specified and directed for the following :-

(a) One light/exhaust fan &ceiling fan point controlled by one, one-way switch & one switch and regulator

(b) One 3 pin socket outlet 5 Amps, 230 volts on same board

All as per item No. 221 above but with 4 Sqmm cable for one 3 pin 5/15 Amps switch socket outlet on independent board with copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed by Engineer-In Charge.

Supply and fix surface mouting LED luminairies 1x10 watts 2 Feet, 230 volts, wall/ceiling mounted type suitable for mirror fittings with all internal connections connector block with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge.

Supply and fix surface mouting LED luminairies 1x 22 watts 4 Feet, 230 volts, wall/ceiling mounted type suitable for mirror fittings with all internal connections connector block with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge.

Taking down carefully wooden/MS boxes of any size and any pattern complete with all enclosures/ components includung making good to the disturbed surfaces complete all as specified and directed by Engineer-In Charge.

M&L for sub main wiring with two runs of single core 1100 volts grade, FRLS PVC, insulated, unsheathed, multistranded copper conductor cable of size 6.0 Sqmm, drawn through and including non-metallic rigid PVC conduit 20mm dia and conduit accessories including provision of one run of FRLS PVC insulated 6 Sqmm multistranded copper earth continuity conductor in concealed wiring including taking down old sub main wiring complete all as specified and directed. [NOTE: 2 runs of 6.0 Sqmm cable, 1 run of 6 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

M&L for point wiring complete with FRLS PVC insulated, unsheathed cable 1100 V grade conforming to IS-694, 1.5 sqmm (nominal area) multi-stranded with Existing concealed PVC conduit medium grade not less than 20mm dia (ISI marked ) and modular accessories of frames metal flush boxes for mounting of switches, socket outlets, regulators etc, including provision of FRLS PVC insulated, unsheathed multistranded copper conductor of size 1.5 sqmm as earth dolly complete all as specified and directed for the following (Note : Modular box,frame plate and modular cover measured and paid seperately under revelent items):-

(a) One light/fan/exhaust fan controlled by one, one-way switch and one fan regulator for ceiling fans.

(b) One bell point controlled by one bell push.

(c) One 3 pin socket outlet 5 Amps, 230 volts on independent board

All as per item No.226 above but with 4 Sqmm cable for one 3 pin 5/15 Amps switch socket outlet on independent board with copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. .

S&F Modular Switch 1 way 6 Amps, 1 module complete all as specified and directed by Engineer-In-Charge.

S&F Modular Switch 1 way 16 Amps, 1 module complete all as specified and directed by Engineer-In-Charge.

S&F Modular Sockets 1 way 6 Amps-2/3 pin combined 2 module,complete all as specified and directed by Engineer-In-Charge.

S&F Modular Sockets 1 way 6/16 Amps-2/3 pin combined 2 module,complete all as specified and directed by Engineer-In-Charge.

S&F Modular electronic Fan Regulator 120W,230 Volts 2 module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular bell push, 6 Amps, 1 module complete all as specified and directed.

S&F Bell, Ding-Dong, AC, 230 Volts, single pole complete all as specified.

S&F Modular white cover plate with frame 1 module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular white cover plate with frame 2 module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular white cover plate with frame 3 module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular white cover plate with frame 6 module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular metal flush box 1/2-module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular metal flush box 3-module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular metal flush box 6-module, complete all as specified and directed by Engineer-In-Charge.

Supply and fix ceiling fan 1400mm sweep, three blades(White Colour) 1 star rating with downrod and canopies but without regulator suitable for working on 230 volts, 50 Hz single phase supply including provision of 3 core twisted copper conductor cable of suitable guage from ceiling rose to connector of ceiling fan complete all as specified and as directed [ Note : Old Fans are handedover to MES authority ,quated rates deemed to be included in quated rates]

S&F Sheet metal board of size 90X75X15cm made of 2mm thick CRCA sheet front openable door with necessary locking arrangement suitable for acommodating TPN DB, 3 phase energy meter, MCCB 4 pole up to 200 Amps including painting with two coats of synthetic enamel paint over a coat of red oxide primer after taking down old boxes complete all as specified and directed. [Note : Supply and fixing of TPN DB&MCCB and refixing of energy meters paid separately].

Supply and fixing of domestic exhaust fan with louver AC single phase 230/240 Volts 300 mm sweep, 70 watts, 1380 RPM speed, 1600 cu.mtr/Min transair, including making suitable hole with RCC ring for smooth finishing to fix the exhaust fan and making good distrubed surfaces and also provide suitable wire mesh in outer side complete all as specified and directed by Engineer-In-Charge.

Taking down of existing energy meters of any capacity of 1-ph/3-ph energy meters and refixing the same after carrying out the repairs to wiring as directed by Engineer-In-Charge.

Supply & Fixing BLDG security light/ street light 70W watt LED fitting complete driver and suitable 40mm or 50mm dia bracket arms with wall fixing accessories and connected with service wire with street light control complete all as specified and directed .

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanized steel earth strips of size 32 x 6mm by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 5 connected to earthing test point including testing on completion all as directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth strip connected to test point max 7.5 mtr as per site requirement, PCC 1:3:6 type for earth pit , CI cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 40 mm dia for supporting of earth strip. .

GI or Steel wire Earth continuti conductor or main earth lead fixed to wall on batten or ressess or chasess or burries in ground or drawn in conduit /pipe to loop earthing as 4 sq mm

S&F LED light fitting, 1x16w, 230v decorative wall mounting type SS finish fixture opal glass diffuser with multicolour ABS housing with poly carbonate rings, and glass shade with lamp holders, connector block, etc including lamps complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-In Charge

S&F LED tube light fitting, 1x20w, 230v decorative wall mounting type with multicolour ABS housing with poly carbonate rings, and glass shade with holders,drivers connector block, etc complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-In Charge

S & F LED Panel light fittings 1x40 watts,2X2Feet 230 volts, with LEDs including driver 1x40 Watts, with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge.

S & F LED Panel Fancy Down/Dim light fittings 1x3 watts (for BAR),230 volts, with LEDs including driver 1x3 Watts, with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge.

S & F LED Bar decarative surface mounting 20W dome/conical shaped Fancy Down pendent light fittings 1x20 watts,230 volts, with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge.

S & F LED Flexion LED Digital RGB Strip IP-40 colour coordinated 5mtr RGB Strip with light traval function comes with IR Remote for false ceiling/POP Conf hall/Bar decarative surface 230 volts, with all suitable driver of same wattage accessories and connecting up with and including twin core twisted flexible copper conductor plug &cable of suitable size complete all as specified and directed by Engineer-In Charge.

Supply&Fixing LED Post top lantern spherical diffuser of IP-65 lamp fitting along with Driver and post and spherical diffuser complete all as specified and directed by Engr-in-Charge.

Supply&Fixing LED Post top lantern Garden lighting 16W 3 Feet hight imposing street furniture IP-65 lamp fitting along with Driver and post and spherical diffuser complete all as specified and directed by Engr-in-Charge.

Supply&Fixing LED Garden projection lighting 20 W LED 6500K for street furniture IP-40 lamp fitting along with Driver and post and spherical diffuser complete all as specified and directed by Engr-in-Charge.

Supply&Fixing LED Focus Lights 100W for Building/Garden projection lighting to party gallary IP-66 Light changing RGB lamp fitting along with Remote controled Driver and RCC Base with connector complete all as specified and directed by Engr-in-Charge.

M&L for Laying of LT XLPE insulated , sheathed, bedded, galvanised steel strip or wire armoured, heavy duty, electric power cables of size 3.5 core 35 sqmm, 1100 volts grade with stranded aluminium conductor laid in trenches/passing through pipe/duct/road crossing/fixed on poles/walls including jointing material such as copper lugs, cable glands, etc, including connecting and testing complete including removing old cable all as specified and directed by the Engineer-In-Charge.

M&L for Laying un reinforced precast concrete cable covers class LV type-I flat size 250 mm X 150 mm X 40 mm, complete all as specified and directed by Engr-in Charge.

M&L for provision of cement concrete for ground, floors and pavings 1:3:6, type C1, grade M-10 , 20mm graded aggregate to cover the demolition area for LT cable protection complete all as specified and directed by Engr-in Charge.

M&L for 10mm thick rendering in cement mortar 1:4 on brick or concrete surface for fixing of tiles on walls complete all as specified and as directed.

BHEEMRAO PATIL CONTRACTOR

STANDARD AGENCIES

DWARKA PERSHAD RADHEY RAMANLAL