WBPHED /EE/AMD/NIeT-68of 2023-2024/7

Amount

Supply and Delivery of Following Materials at site:-

3½ Core X 95 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.(From Kit-Kat to SFU to LT PDB Cum MCC Panel )(Make:-Approved Make)

70 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make)

4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps.(Make-Approved Make)

4 ft. long 18 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps..(Make-Approved Make)

4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From LT MCC Panel feeder to DBs)(Make:-Approved Make)

450 mm Sweep exhaust fan 220V-240 V,50 Hz, Single phase.(Make:-Approved Make)

3 Blade 1200 mm Sweep ceiling fan, 220V-240V,50 Hz,AC.(Make:-Approved Make)

3 CoreX 2.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed.(Make:Approved Make)(For 4 Nos Street light from JB)

4 Core X 4 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.(From DBs to Street light outside of the Pump House )(Make:-Approved Make)

100 Watt High efficiency round LED high-bay luminarie with aluminium die cast housing with high lumen efficiency of>130 lm/Watt, a perfect energy-saving solution with IP65 Protection.(Make-Approved Make)

Supplying and fixing 200 Amp, 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating on angle iron frame.(Make-Approved Make)

Supplying and fixing double door 8 Way Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(With 40 Amp TPN MCB as a incomer + 8 Nos 10 Amp MCB as a Outgoing)(Make-Havells, Model No-DHDPTODRW08)

Supply of 25 mm dia GI Conduit 1.6mm thick.(Approved make)

Supply of GI Bend/Elbow.

Supply of GI saddle etc …

Two way Circular Box & cover.

One way Circular Box & cover.

Labour for fitting and fixing 25 mm dia 1.6mm thick G.I. Conduit above ground (exposed) in the wall with previously supplied saddle clamps including cost of jointing materials,holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

3 X 22/0.3(1.5 Sqmm).(For lighting Fixtures)

3 X 36/0.3(2.5 Sqmm).(For Exhaust Fans)

3 X 56/0.3(4 Sqmm).(For industrial Plug Sockets)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.

12 Module.

4 Module.

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.

Supplying and fixing 10 Amp 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs/Switch Board and necessary connection.(Act As Fuse in Switch Board for Exhaust fan)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Laying of cable 3½ core 95 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.(From WBSEDCL End to SFU to LT PDB Cum MCC Panel to Stabilizer)

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.(For 4 Nos Street Light)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:45 cm (18").

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long).

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.(For Two Numbers Celing Fan)

Fixing only Floodlight/High Bay Fitting with suitable tie clamps and MS plate for mounting top of the Ceiling or similar structure.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on,porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting.(250 x 250 x 100mm

200 x 150 x 100mm.(For 4 Nos Street Light)

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 12 SWG.

Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

Add. GST@18%

Add. Cess@1%

BENGAL CONSTRUCTION

EASTERN INDIA SALES AND SERVICE

M/S KALYANI ENTERPRISE