CWE/GGN/GT-25/2025-26 ADDN / ALTN TO MD ACCN P-32 TO P-51 (PH-1) AT 2003 STN UNDER GE (AF) GURGAON

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed.

S&F Framed mild steel work as in gates, grill, grating including pintel hinges, stops, hand made sliding bolts etc.with any type of forging, riveting, welding etc complete conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates, etc., cut to size, holes punched including rounded headed screws, clout nails or revets and fixed to wood or steel framing or fixing to MS clamps with necessary bolts and nuts with plain 40mm lap joints welded to frame complete all as specified and directed.

M & L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 30 mm 2nd class hard wood facoty made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain , chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats with wire mesh fitted complete all as specified and directed.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed

M&L for factory made powder coated anodised aluminium section for frame for door, window and ventilator complete all as specified and directed.

M&L for factory made Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed.

M&L for factory made powder coated Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed..

S & F plain sheet glass 4.8 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as specified and directed. Note:- Beading/rubber packing is included in the rates for aluminium sections above.

S&F 125 mm long mild steel Butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in aluminium tower bolts 200 mm, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 150 mm size Aluminium handles, oval type, stove enamelled black, ISI marked complete all as specified and directed.

Supply & fix factory made solid panel moulded PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and directed.

S&F Factory made solid panel moulded printed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading in the frame at site as per specification & drawing complete all as specified.

S&F in repair tubular towel rail 20 mm dia type brass chromium plated 600 mm long between flanges complete all as specified and directed

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles all as specified and dierected

M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

M&L Rendering 15 mm thick cement plaster on fair faces of stone masonry or brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed Note : edge/face of the chajjas, where damaged, shall be repaired and is included in this item.

M&L for Rough cast plaster over old plasteres surface of brick walls size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed

M&L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and smooth complete all as specified and directed.

M&L for 75 mm thick PCC ,type D-2 1:4:8 (20 mm graded aggregate) in flooring cmplete all as specified and directed.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris from the premises complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 10 mm thick rendering CM 1 : 4 all as specified and directed.

M&L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick or set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for Chequered cement concrete tiles glossy finish of size (min) 20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors with screed bed flooring complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L 16-18 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/rendering in CM 1:4 including Roughening surfaces of old/new concrete floor/wall by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm complete all as specified and directed.

M&L for Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

M&L cutting chases pinning in brick mass and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed.

S&F 20 mm outer dia bore CPVC tubes with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread ,all as spd and directed

S&F in repair 15mm bore pillar cock fancy type chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.

S&F in replacement 5.5 mm thick mirror(600 x 450 mm size minimum) with moulded edge with chromium plated brass screws on each corner or as required and cup washers complete all as specified and directed.

S&F in repair Vitreous china wash down closet pan pedestal pattern white, complete including fixing to P trap or S Trap, pan including all joints and making good the floor complete all as specified and as directed.

S&F in repair Vitreous china squatting pan (orissa pattern) size 580 X 440 mm, white, complete including fixing to trap, pan including all joints and making good the floor complete all as specified and as directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling water tanks of any capacity and removing to store complete all as specified and directed

M&L for Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified & directed.

S&F in repair 15 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15 mm bore all as specified and directed.

S&F 20mm ball brass valve, high pressure with polythene float and flynut complete, screwd for iron pipes or brass ferrule and fixed etc complete all as specified and directed.

S&F in repair stop/angle valve brass cast copper alloy screwd down high pressure with crutch or butterfly handle screwed down both ends for iron pipe or for unions fixed for 15 mm dia bore pipe completre all as specified and directed

S&F in repair 100mm PVC soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints including any type of fittings( as in bedn, elbow etc) all as specified.

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx90cm (weight not less than 8kg)complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed

M&L in repair for CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified.

M&L for Sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide or corner shelf of dia 25 cm min. with chromium plated bracket guard and railing complete all as specified and directed

S & F of Godrej pattern mild steel cup board with shutter made out of 1.0mm M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per. Godrei Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zine chromate primer complete including taking down old unserviceable cupboards complete all as specified and as directed. Note: Only front face (front elevation) of cupboard to be measured for payment purpose

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm padding as roof/subbase , surface finished even and smooth in slope if required without using extra cement all as specified and directed

Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a out of MOD land all as specified and directed

15mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement all as specified and directed

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Applying two coat of aluminium paint / waterproof paint paint as directed by Engr-In-Charge

Supply only liquid water proofing compound all as specified and directed

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom (as approved) fitted/ tightened on Curtain Rod incl taking down old existing all as specified and directed

S&F in repair Brass chromium plated shower rose 125 size including fixing to steel with necessery joints/fittings complete all as specified and direced

Taking down carefully copper/ Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed.

Taking down old u/s ceiling fans/ wall mounted fans of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, oiling and greasing complete including providing flexible twin copper conductor stranded cord from ceiling rose to connect fans complete all as specified and as directed.

Taking down unserviceable MCB DB's/AC's box alongwith MCB/MCCBs SP/SPN/TPN of any make and type including teakwood board to deposit in store for keeping in safe custody for reuse or takeing in schedule of credit of any size/rating and making good disturbed surface of wall/roofs complete all as specified and as directed.

M&L for point wiring for light points controlled by one, one way switch using 1.5 Sqmm nominal cross sectional area copper conductor multistranded, PVC insulated unsheathed FRLS cable in and including Heavy duty 2mm thick ISI marked concealed conduit of suitable dia complete with all ISI marked PVC conduit accessories/ fittings and 1.5 sqmm nominal cross sectional area stranded copper conductor PVC insulated unsheathed FRLS green colour cable earth wire and connecting to earth dolly etc. complete all as specified and directed. The point wiring shal include the wiring of light/ outlets of any length from the distribution board via switch to the point.

One light/ fan point controlled by one, one way switch.

One Socket 3 pin 5 Amps on independent board

One Socket 3 pin 5 Amps on the same board, complete all as specified.

Complete all as per item No 78 above but using 2.50 Sqmm single core multi stranded copper conductor PVC insulated and unshathed, FRLS grade cable for 15 Amp socket outlet on independent board including 2.50 Sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed for the following. Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green

S&F piano switch flush type 5 Amps 230 Volts single pole one way complete all as specified and directed.

S&F piano switch flush type 15 Amps 230 Volts single pole one way complete all as specified and directed.

S&F socket outlet combination 2 in 1, 3 pin 5 Amps flush type universal complete all as specified and directed.

S&F socket outlet combination 2 in 1, 3 pin 15 Amps flush type universal.

S&F ceiling fan regulator stepped electronic type 120 watt rating, 230 volts, ISI marked complete all as specified and directed

S&F ceiling rose surface bakelite 3 terminal with base plate.

S&F in replacement LED tube light fitting 1x16 Watt, 220 V, AC decorative box type with driver, holder incl LED light connecting up with 3 core flexible copper conductor all as specified and directed.

M&L for sub main wiring with two runs of 2.50 Sqmm 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 with one run of 2.50 Sqmm single core FRLS PVC insulated unsheathed copper conductor cable as earth wire incl taking down old u/s submain wiring complete all as specified and directed. Note : Two run of 2.50 sq. mm copper conductor and one run of 2.50 sqmm earthing wire shall be considered and measured as one unit length.

Supply and fixing Rigid non-metallic PVC conduit 25 mm dia exclusive of boxes (junction/terminal) but inclusive all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Supply and fixing in replacement miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp 240V, 10 KA 'B' curve, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in replacement miniature circuit breaker (MCB) of SPN and current carrying capacity 16 Amps to 40 Amp 240V, 10 KA 'c' curve, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in replacement exhaust fan, steel body AC single phase, 230V of size 300 mm sweep with blades and frame and louvers including making hole etc complete all as specified and directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m depth, area not exc 10 Sqm on plan for foundation of poles/laying of cables/ stay/ strut and getting out in soft/loose soil complete all as specified and directed.

Returning, filling including spreading, levelling , watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material (soil) n exc 50m and deposting where dirceted at a level not exc 1.50 mtr above the starting point complete all as specified and directed.

M&L for dry sand cushioning to under ground cables with 8 cm thick before laying cables and 15cm thick after laying (total 23 cm) and compaction till 18 cm for complete all as specified & directed. Note : Sand Compacted thickness 18cm shall be considered for measurement and payment purpose.

M&L for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified & directed.

Supply, laying, jointing and testing XLPE LT insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 volts grade earthed system and conforming to IS:7098 of 1995 and of size 3.5 core x 95 Sqmm and laid in trenches/ ducts/ pipe or on pole incl taking out/down old existing cable complete all as specified and directed

Supply, laying, jointing and testing XLPE LT insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 volts grade earthed system and conforming to IS:7098 of 1995 and of size 4.0 core x 16.0 Sqmm and laid in trenches/ ducts/ pipe or on pole incl taking out/down old existing cable complete all as specified and directed

Supply, laying, jointing and testing XLPE LT insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 volts grade earthed system and conforming to IS:7098 of 1995 and of size 2.0 core x 10.0 Sqmm and laid in trenches/ ducts/ pipe or on pole incl taking out/down old existing cable complete all as specified and directed

S&F in replacement MCCB 125 Amp 4 pole breaking capacity 16 KA, 415V adjustable type complete all as specified and directed .

S&F in replacement MCCB 100 Amp 4 pole breaking capacity 16 KA, 415V adjustable type complete all as specified and directed .

Net Contract Sum will be after deducting Sch of Credit of Rs 1,92,639.00

M/S Rohit Enterprises (BID ID -3468780)

SHAKSHI ENTERPRISES (BID ID -3468120)

Chaudhary Constructions (BID ID -3468350)