Construction of RT Circle office building and TCD Division office (3rd floor over the existing W&M Circle office, Hubballi) at 220KV SRS Colony, Hubballi

Construction of RT Circle office building and TCD Division office (3rd floor over the existing W&M Circle office, Hubballi) at 220KV SRS Colony, Hubballi

PART-A SUPER STRUCTURE

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. SR 2023-24 V-2 ...

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...

Providing Honne wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side...

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring typ...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. SR 2023-24 I-12.60 VP-105

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete SR 2023-24 I-12.62 VP-105

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer'...

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing CPVC pipes confirming to IS 15778 having themselves stability for hot and cold water supply including all CPVC plain and brass treated fittings including fixing the pipe with clam...

Providing and fixing CPVC pipes confirming to IS 15778 having themselves stability for hot and cold water supply including all CPVC plain and brass treated fittings including fixing the pipe with clam...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50 mm SR 2023-24 V-5 VP-162 I-13.25.1

Providing of Gunmetal Ball Valve of Non rising stem, screwed in bonnet, inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO 7, Unbreakable sheet metal Handwheel, confoming to IS:77...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operation...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR BOARD of approved br...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

ELECTRIFICATION

Supplying TR split Airconditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed compressor with aircooled condenser, motorcapacitor and start ru...

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. (PW Ele ...

Sun Control Film (Market Rate)

Supplying, erecting, testing & commissioning of OFF-EUPS system suitable for operation on 230V,50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 1.5 kVA OFF ...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. SR 2023-24 vol-6 VP 6 I- 3.7

Supplying 2mm thick 20mm dia pvc conduict with required accessories before casting roof/column and fixing on wall after grove cutting and wiring using copper wire and required materials for laying of ...

A) Medium point (3mtrs to 6 Mtrs) SR2023-24 nVP 5 I- 2.1.1

C) Long point ( From 6 mts to 10 Mtr) SR 2023-24 vol-6 VP-2 I- 2.1.1

Supplying 6 amps 3/5 way flush / projected by socket and 5 amps flush type SP, switch either surface mounted on a gang box or in a 4mm thick plastic sheet and fixing over a flash mounted on TW box and...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. SR 2023-24 vol-6 VP 6 I- 3.7

Supplying and fixing teak wood board with out front plank made out of not 15mm thick planks with planks made out of not more than two pieces and fixing the same to the wall using tappered inverted te...

32 Amps Bakelite DP

Supplying and drawing PVC insulated flexible copper wire of approved make.A.40/0.0040 copper wire SR 2023-24 vol-6 VP - 6 I- 2.4.3

B. 70/0.0052 copper wire. SR 2023-24 vol-6 VP - 6 I- 2.4.8

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...

Supplying of recess mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, SR 2023-24 vol-6...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated volt SR 2023-24 vol-6 I- 6.4.1 VP 23

Fixingaceiling/wallmountingfanofallcapacitiesandalltypes,withnecessaryclampsand'S'hookmadeoutof15mmdiaMSrod,with5A.ceilingroseofapprovedqualitywithnecessarylengthof23/0.0076inchPVCinsulatedtwintwisted...

Supplying exhaust fan with bracket blades complete for LIGHT DUTY of approved make crompton / almonard of size 457mm or (18") 900 RPM. SR 2023-24 vol-6 VP-22 I-6.1

Fixing one exhaust fan after making a suitable hole in the wall finishing with CM and welding to existing wall or brackets with bolts and nuts and 5amps ceiling rose with sufficient length of 23/0.007...

Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...

Wiring for Lift

Lan connection with server room

PART-B OFFICE FURNITURE

S.E.Cabin Furniture

Main Table 2100x900x750H with Pedestal 450x550x670 ht.

Extn. Table 1200x600x750 with Storage

Discussion Table 4200x1100x750 ht.

Low ht. storage cabinet 1200x450x750H

Low ht. storage cabinet 1130x450x750H

E.E.Cabin Furniture

GDDK-180 Main Table: Size: W 1800x D 900x750 with Pedestal W 420x D 510x H 560 Extn. Table 1200x500x700 with Storage Supply & installation of Executive Table of size 1800 w x 1000...

GDSR- Side Table : Size W 1360 x D 450 x 640 h mm made of compressed particle board with postform lamianted with Key board Tray 500 w x 300 d fiber material and hanging drawer CPU Trolly metalic.

GDMP-MobilePedestal 420w x 510 d x 560 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism for 3-drawer and 3 D handle.

ZTC-3012 (Zen) Discussion Table 3000x1200x750 ht. Supply & installation of Discusion Table of size 3000 w x 1200 d x 750 h made of Table Top 40mm thick pre laminated board with matching PVC edge lipp...

Composite storage cabinet 1200x450x750H

Composite. storage cabinate with one shelf, 1200 L x 450 D x 750 ht and 3 door Top 18mm thk pre laminated particle board with Back 9mm Thk per laminated part...

A.E.E.O.,& AO. Cabin Furniture

HT-501 Senate Main Table 2000x800x780 Ht.

Supply & installation of Executive Table of size 2000 w x 800 d x 780 h Made of Senate a desk inspired by the philosophies of...

V-2D1F Mobile Pedestal 400x435x640H

Mobile Pedestal 400w x 435d x 640 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism for 3-dra...

Composite Storage Side Credenza 1200x450x750H

Side Table made of 18mm tk. Top and sides doors and shelves made of 18mm tk. Prelaminated board. Shutters having 2 clip on hinges with lock handle of sup...

A.E. Cabin Furniture (Technical Section)

HT-531 Main Table 1800x750x780H

Supply & installation of Executive Table of size 1800 w x 750 d x 780 h made of compressed particle board with postformed lamin...

Visitor's Room Furniture

Centre Table 1000x500x450 Ht with one Shelf

Cashier Room Furniture VMT-1890 Main Table 1800x900x750 Ht.

Supply & installation of Executive Table of size 1800 w x 900 d x 750 h made of compressed particle board with hard lamination having straig...

V-2D1F Hanging 3Dr. Drawer Unit 400x435x640H

Hanging Pedestal 400w x 450d x 400 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism...

VMT-1275 Executive Table 1200x750x750 ht.

Supply & installation of Executive Table of size 1200 w x 600 d x 750 h made of compressed particle board with hard lamination having straight ed...

V-2DIF Hanging 3Dr. Drawer Unit 400x435x640H

Hanging Pedestal 400w x 435d x 640 h made of prelaminated board. Having 3-drawer mounted on metal drawer glides of superior quality, single lock mechanism...

Computer Operator Table

VMT-1275 Computer Table 1200x750x750 ht. with KBT 1-Drawer, CPU & UPS Rack Supply & installation of computer table of size 1200x750 x 750 h having made out of 25mm tk. hard lam...

Medium Height Storage With Printer Table 750x450x750 ht.

Supply & installation of printer table of size 750 x 450 x 750 ht. with stationery rack & two swing doors locakable made out of 25mm tk. lamina...

* High Back Mesh Chair (Headrest)

* Multilock Mechanism

* Two Way Adjustable Arms (Height &

* Nylon Castors

EE Cabin Discussion Chair

Amaze MB Premium Exect. Chair

* Medium Back Mess Chair

* KM Series Mesh

* Self Calibrating Multilock Mechanism

* Adjustable Lumbar Support

* Height Adjustable Arms

Cabin chair for AEEO & AO ANATOM HB Chair with armrest

* Anatom Medium Back Chair

* With Headrest

* Single Lock Synchro Mechanism

* Adjustable Lumbar Support

* One Way Adjustable Arms...

Visitors chair for above cabins

Forum VA PC 4 Leg visitor chair with armrest

* Forum Low Back Mesh Chair

* Visitor Chair

* Powdercoated Four Legs with Nylon castors

Visitors chair for above cubicals Forum VA PC 4 Legs visitor chair with armrest

* Forum Low Back Mesh Chair

* Visitor Chair

* Powdercoated Four Legs with Nylon castors

Workstation chair

Forum MB . Chair with armrest

* Forum Low Back Mesh Chair

* Centre Titi Mechansim

Visitors Room - SJ -820 Steel tandem seating - 3-seater with fibre shell seats

Visitors Room - SJ-820 Steel tandem seating - 2-seater with fibre shell seats

PART C- Service connection PART - A 11KV LINE of 120 Mtrs. 9Mtr RCC Pole for LT Line & 3rd pole Material portion

Labour Charges for 9Mtr RCC Pole for LT Line & 3rd pole

DP Structure only excluding poles

Labour Charges for DP Structure only excluding poles

11 KV, 5KN Polymeric Pin Insulator (24mm DiaFRP Rod

11KV 45 KN Polymeric Insulator

11kV Horizontal cross arms with clamps, HTST Supports, bolts, nuts and washers (for RCC poles)

Labour Charges for 11kV Horizontal cross arms with clamps, HTST Supports, bolts, nuts and washers (for RCC poles)

Spiral Earth Electrode

Labour Charges for Earth Electrode

11KV GOS set 200A SB

Labour Charges for 11KV GOS set 200A SB

H Frame set for fixing GOS set

Labour Charges for H Frame set for fixing GOS set

HG fuse unit 11KV class at tapping point

Labour Charges for HG fuse unit 11KV class at tapping point

Rabbit ACSR Conductor for 11 KV Line Jumps

Labour Charges for Rabbit ACSR Conductor for 11 KV Line Jumps

11KV UG Cable 11kv class 3x95Sq.mm XLPE UG Cable (Round Armoured)

Cable termination kit out door/Indoor suitable for 95 sq mm HS type

Cable covering tiles 250x250x40

Artificial/Manufacture Sand

RCC Hume pipe 2000mm long & 150mm dia for Road/ Gutter crossing

RCC Callers for Hume pipe

G I Pipe for Cable Raising, 100mm dia.

Cable Joint & Route indicating stones

U G Cable Labour charges Cable trench excavation 1000x0.6x1=600 (For Laying of 400,240,95 Sqmm Cable Variour necessary).

Cement Concrete Road

Laying of cable in trench

Refilling & consolidation

Making of cable terminations

Covering the cable with tiles

Spreading the sand & forming with sand round the cable

Laying of RCC Hume pipe

Laying of GI Pipe

Laying of Joint & Route indicating stones

Part B: Transformer Centers for 1 X 100 KVA DPTS with TC. 9 Mtr RCC DP, Transformer Structure for 100 KVA & 63 KVA.

Labour charges for 9 Mtr RCC DP, Transformer Structure for 100 KVA & 63 KVA.

11kV/433V, 100 kVA, 3 Phase 50 Cys Distribution Transformer BEE -5 Star Rated with Oil

Labour charges for 11kV/433V, 100 kVA, 3 Phase 50 Cys Distribution Transformer BEE -5 Star Rated with Oil

11 KV, 5KN Polymeric Pin Insulator (24mm DiaFRP Rod

11KV 45 KN Polymeric Insulator

Guy set with 2 Nos. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07

Labour charges for Guy set with 2 Nos. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07

Earthing materials pipe type for grounding as per Drawing No. BESCOM/GM/CP/15 & 34/ Dt: 24.10.07

Labour charges for Earthing materials pipe type for grounding as per Drawing No. BESCOM/GM/CP/15 & 34/ Dt: 24.10.07

Caution/Danger Board as per Drawing No.BESCOM/GM/ CP/40 Dt: 24.10.07

Labour charges for Caution/Danger Board as per Drawing No. BESCOM/GM/ CP/40/ Dt: 24.10.07

Anti Climbing Device (12mtrs/1Kg GI Barbed Wire) Lumpsum

Labour charges for Anti Climbing Device (12mtrs/1Kg GI Barbed Wire) Lumpsum

Labour charges for Concreting for Guy sets without cement

Guy wire 7/10 SWG

11kV Lightning Arrester, Metal Oxide 9kV, 5kA

Labour charges for 11kV Lightning Arrester, Metal Oxide 9kV, 5kA

LT Protection Kit for 100 KVA & 63 kVA

Labour charges for LT Protection Kit for 100 KVA & 63 kVA

LT Distribution box for 100 kVA & 63 KVA with MCB

LT Distribution box for 100 kVA & 63 KVA with MCB

i. PVC Insulated & Un-Sheathed Aluminium Wires, Single Core Multi strand 1.1 kV class 120 Sq.mm.

Labour charges for PVC Insulated & Un-Sheathed Aluminium Wires, Single Core Multi strand 1.1 kV class 120 Sq.mm.

ii. Copper lugs - 120 Sqmm

iii. PG Clamps - Rabbit to 120 Sqmm

iv. Spacers for DTC Wiring

v. Fish Plate with necessary Clamps,bolts & nuts etc complete (Galvanised)

LT Metering Box for housing the ETV Meter with CTs busbar wiring etc.

Labour charges for LT Metering Box for housing the ETV Meter with CTs busbar wiring etc.

LT Electronic Tri-Vector Meter 5A, Class-0.5/1.0 accuracy

Labour charges for LT Electronic Tri-Vector Meter 5A, Class-0.5/1.0 accuracy

H-Frame for mounting GOS

Labour charges for H-Frame for mounting GOS

11kV Solid Core Type HG Fuse Unit

Labour charges for 11kV Solid Core Type HG Fuse Unit

11kV, 200Amps, Single Break GOS

Labour charges for 11kV, 200Amps, Single Break GOS

Part D: 1.1 KV 25 Sqmm LT UG Cable.

LT Feeder Piller Box 8 Way with Cutouts

LT Feeder Piller Box 8 Way with Cutouts

Pipe type earthing for each Feeder Piller box

Pipe type earthing for each Feeder Piller box

Armored L.T.UG Cable 1.1KV Class 25 sqmm. 3.5 Core.

Armored L.T.UG Cable 1.1KV Class 25 sqmm. 3.5 Core.

95Sqmm Aluminum lugs for UG cable

PVC Pipe 50 mm dia for ground to DTC point

25 sqmm All lugs for UG Cable

Construction of plate form of Size (0.6x1.2x1.2) mtrs for mounting of 8 Way & 12 way feeder piller box

Cable Joint & Route indicating stones

Labour charges for Cable Joint & Route indicating stones

c) Refilling & consolidation

e) Covering the cable with tiles

f) Spreading the sand & forming with sand round the cable

Cable trench excavation 75x0.6x1=Ordinary Soil

Brass Cable Glands for Service Mains

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,