Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
6 Aug 2026, 11:00 pmClosed
Karnataka State Road Transport Corporation
Rajeshwari M C
CREW REST ROOM AT FIRST FLOOR
KSRTC/2026-27/BD/WORK_INDENT180
KSRTC/2026-27/BD/WORK_INDENT180
Open
Buildings
Two Tender Document System(Two Cover)
Karnataka State Road Transport Corporation Office Bengaluru
5 documents required · 5 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
as per tender notification
Liquid assets and or availability of credit facilities of not less than Rs. 42.84 Lakhs credit lines /letters of credit /certificates from Banks) for meeting the fund requirement etc
To Qualify for award of this contract the tenderer in his name should have, in the last five financial years ( i.e. during the years 2021-22 , 2022-23 , 2023-24 ,2024-25 & 2025-26) achieved in at least two financial years a minimum average financial turnover of Rs 285.60 Lakhs (in all classes of civil engineering construction works only
To Qualify for award of this contract the tenderer must have valid Class I Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification
To Qualify for award of this contract the tenderer, as a prime contractor, should have in his name Satisfactorily completed at least One Single work of Similar Nature of Developmental Works Costing not less than Rs 71.40 Lakhs. The work should have been commenced and completed in any year during the last five financial years (i.e from 01-04-2021 till date of submission) i.e the work must have commenced on or after 01-04-2021 and completed till the date of submission of tender
For qualification of the Contract the Tenderer should have executed in any one year for a continuous period of 12 months during the last 5 years, the minimum quantities of work 80percentage of the sanctioned quantity of the selected item 2021-22 , 2022-23 , 2023-24, 2024-25 and 2025-26 , the following minimum quantities of work in any of the Government orPublic Sector Undertaking. To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name Executed in any one year during last five years i.e. years 2021-22 , 2022-23 , 2023-24, 2024-25 and2025-26 , the quantities of works mentioned below 1.Structural steel 193.60 Qtl 2. Aluminium Composite Panel work 151.20 Sqm 3. PUF,Metacolor Sheet roofing 571.00 Sqm 4. False ceiling 378.00Sqm 5. SBM 278.00 Sqm 6. Vitrified flooring 413.00 Sqm
₹3,570
₹2.1 L
8 Jul 2026
8 Jul 2026
12 Aug 2026
17 Jul 2026
24 Jul 2026
Construction of additional crew rest room at 1st floor over existing crew rest room at Kempegowda Bus station Terminal-01, Bangalore
Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer in charge
Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in charge
Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite tr...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite tr...
Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum ompressive strength of 4.00 N mm2 conforming to IS 2...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
PProviding and fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVCMatching to RAL 9016 sections and with minimum TiO2Titanium Dioxide at 6 PHR with TPE Thermo Plastic Elast...
Providing and fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead fre...
Providing Mathi Nandi wood frames of doors, windows, clerestorywindows, ventilators and other frames, wrought, framed or assembledincluding making plaster groves excluding cost of cement concrete ands...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing in position fully panelled Honne wood shutters for doors with, stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...
Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Suspe...
Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulde...
Providing 6 mm cement plaster with cement mortar 1:3 1 cement : fine sand on concrete surface ceilings including rounding off cornerwherever required smooth rendering, providing and removing scaffol...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement : 4 fine sand including rounding off corners wherever required smooth rendering, providing and removin...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1:3 1 c...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing lime wash on walls with one coat with lime of approved quality to give an even shade, including cost of materials, labour complete as per specifications and as per directions of Engineer ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work Two coats applied at 1.43 ltr 10 m² over and including priming coat of exterior primer a...
Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, exc...
Providing and laying vitrified floor tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08Percentage and conforming to IS: 15622, of approved make, in al...
Providing and fixing brass bib cock of approved quality : Vol 2 117 13.2.1
Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, wit...
Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984 2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved ...
Providing,fabricating and fixing Profiled Poly Urethane insulated Roof PUF Sheet having modular density 40kg m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel, ...
Providing and placing on terrace at all floor levels polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ov...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flu...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 25mm
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 32mm SR23 24 V5 P122 13.1.1
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 40mm SR23 24 V5 P122 13.1.1
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g SR23 24 V5 P122 13.1.1
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g m2 both...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick Rcc stone walls and coloumns beams with necessary aluminium frame works at required level made...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per...
Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works.The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and fixing Steel work welded in built up sections framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip
thickness and resistivity as per IS 3975 P13...
Do 16 Sqmm, 4 Core, 11 GI Strips 4 x 0.8 mm
Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staf 35 to 95 Sqmm
Do 120 to 240 Sqmm
Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches.P 64 of 81 29.08Cement Concrete Ro...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.sr 2021 22 P 20 of 27 512 63.0125 sqmm Long Barrel
Do 50 sqmm Long Barrel
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment omprising of anti glare clear diffuser with Injection moulded poly...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with njection moulded polyca...
Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires P56 of 105 13.5
Supplying of LED light fitting 1 x 4' .feet PVC Batten with integrated LED tube 20 22 W with high quality diffuser with Life of 25000 burning hours and 70Percentage lumen maintenance with CRI grea...
Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076" twin twisted PVC insulated wires, r...
Supplying of recess mounting non integral type 36 W LED w luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K...
Fixing all types and all capacities of 1'x4' 2'x2' LED Light fittings indoor on the wall ceiling rafters girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. Flat .with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 40 x 4...
Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are m...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz 12 24V D.C. P 19 of 105 5.38
Supplying and fixing regular MCB distribution boards on wall ood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase 3
Do Double Door 12 Way TP and N
Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ove...
Do 125 A 25 kA
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking
do 50 63 A TPN
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board
Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT P 18 of 105 5.26
Supplying, fixing and wiring rotary selector switch suitable for Ammeter P 19 of 105 5.27
Supplying, fixing and wiring rotary selector switch suitable for VoltmeterP 19 of 105 5.28
Supplying fixing andwiring earth electrode for groundingof ifts,ransformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGI ipewithGIfunnelwithmeshandsuitablesizereducer fixedonthe top of the earth electr...
GI Copper strips for grounding connections, usingnecessary fixing materials as required. 600 x 600 x 3 mm Copper plate Page 55 of 105 12.58.11
Concealed Conduit System Supplying eavygaugePVCconduitpipe .mmdia.mmthick
confirming oIS2509withsuitablesizebends,metal PVCJunction
boxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab. The con...
Supplying heavy gauge PVCConduit Pipe .dia mmthick withsuitablesizebends,metal junctionboxesadhesivepasteetc.,by groovecuttinginthewall andfixing bybr acingUor Jhooks and cementplasteringuptothewallsu...
Open Conduit System Supplying avygaugePVCconduit pipe dia mmthick
confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , ndfixingusinginvertedwoodplugs incaseof
Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS...
Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral
and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due
groove cutting in Brick C.C wall, including necessary rawl plugs, Machine N...
Do 10 12 Way
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existingme...
Do 10 12 Module
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch P 9 of 105 3.6.1
6A Three Way socket
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase
AC supply conforming to ISS 374 1979 and with double ball ...
Fixing a ceiling wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete P 30 of 105 6.2
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire.P 57 of 105 13.14
Supplying wall mounting fan suitable to operate at single phase 230v AC. supply. 300 mm Sweep P 30 of 105 6.5.1
Supplying of 100 mm dia GI Pipe SR 2021 22 16 of 27 413 49.08
Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.2 HP, Size 65x50 Head 13M, Discharge 462 LPM SR 20...
Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M.
Supplying TR split Air conditioners suitable for operation on A C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacito...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split cassette type A C.P32of 105...
Supplying and installation of insulated refrigerant copper tubing of 5 8" and 3 8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Supplying and filling refrigerant F 22 F 12 for air conditioning equipment's. Which includes the labour and Nitrogen gas for pressure and leak testing.P32 of 105 6.19
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle L angle of size 6mm x 50mm for mounting out door indoor A.C. unit Batteries.P32of105 6.22
Supplying.litres capacity vertical horizontal type wall mounting Electrical water heater with 22 SWG copper SS sheet metal inner Container tinned nside and anticorrosive paint outside and 20 SWG M.S....
Erection charges for fixing a 25 litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for
through bolts and nuts and washers with 150x450x600mm ...
Supplyofround squarerecess surfacemountedrollingtypeLEDDownlightwith.WGU10LEDLampRibFabricatedfromdiecastaluminiumwithwhitepowdercoatedprewiredtomainsconnectorandhasswivellingunitofaluminiumdiecasteye...
Fabricating,supplying and erectionof mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,Bakelites...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4 KGBS works.doc
Tender Document • 0.37 MB
Tender notification KGBS rest room.doc
Others - TENDER NOTIFICATION WITH Annexure A and B • 0.75 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .