Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4.8 L
Closing Date
22 Dec 2021, 11:30 amClosed
EX. ENGINEER (E AND M) W-S (SOUTH-WEST)/M-9
D BLOCK OHT OPP DESU COLONY JANAKPURI NEW DELHI-58
Repair and Rewinding of Skope Make Sub. Pump Set at Various Tube wells in Ward No-67 and 69 in Mehrauli Constituency, AC-45.
2021_DJB_212793_26
N.I.T.No.13(2021-22)/EE(EnM)WS SW/M9 C/oACE M 9
Open Tender
Civil Works
Works
30 days
OFFICE OF THE EX. ENGINEER (E AND M) WS-SW/M-9
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
DJB EMD Ac No. 50448339804
Exempted
29 Dec 2021
15 Dec 2021
22 Dec 2021
15 Dec 2021
22 Dec 2021
15 Dec 2021
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. –M-3 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Cable 2.5 Sq. mm 5 Mtrs., Impeller P.P. 4 Nos., Water Seals 2 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no.– M-51By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Seal Bush 1 No., Stage Bowls P.P. 6 Nos., Impeller P.P. 4 Nos., Rotor end welding Sleeve Turning & Polishing & Key way making 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-106By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Thrust Plate 1 No., Water Seals 2 Nos., Stage Bowls P.P. 4 Nos Cable 2.5 Sq. mm 5 Mtrs.,, Shaft Stationing 1 Job, Stamping Repairing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-115By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Seal Bush 1 No., Stage Bowls P.P. 3 Nos., Impeller P.P. 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-118By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Impeller P.P. 4 Nos, Cable 2.5 sq. mm 5 mtrs., Stage Bowls P.P. 4 Nos., Rotor Sleeve Turning & Polishing 1 Job, Epoxy Paint for Rotor 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-125 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Seal Bush 1 No., Stage Bowls P.P. 3 Nos., Impeller P.P. 3 Nos., Rotor end welding Sleeve Turning & Polishing & Key way making 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-141 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Thrust Plate 1 No., Water Seals 2 Nos., Cable 2.5 Sq. mm 5 Mtrs., Impeller P.P. 3 Nos., Shaft Stationing 1 Job, Stamping Repairing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-155 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Seal Bush 1 No., Stage Bowls P.P. 2 Nos., Impeller P.P. 2 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-164 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Impeller P.P. 4 Nos, Cable 2.5 Sq. mm 5 Mtrs., Rotor Sleeve Turning & Polishing 1 Job, Epoxy Paint for Rotor 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-165 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Water Seals 2 Nos., Connection Piece 1 No., Stage Bowls P.P. 3 Nos., Rotor end welding Sleeve Turning & Polishing & Key way making 1 Job, Epoxy paint for Rotor 1 job, Labour Charges 1 Job.
Repair and Rewinding of 7.5 HP skope make sub. Pump set no. – M-40 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 4 Nos., Distance Bush 3 Nos., Neck Rings 5 Nos., Balancing of Rotor 1 jobs., Shaft Stationing 1 Job., Labour Charges 1 Job
Repair and Rewinding of 7.5 HP skope make sub. Pump set no. – M-127 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Ring 4 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 Job., Thrust Bearing Repairing 1 Job., Stamping Repairing 1 Job, N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-128 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 4 Nos., Rotor Sleeve Turning & Polishing 1 Job., Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Balancing of Rotor 1 Job., Housing Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-143 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Rings 7 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 jobs., Motor Base Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-158 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Neck Rings 5 Nos., Guide Bush 8 Nos., Rotor Sleeve turning & Polishing 1 Job, Stamping Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-182 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 5 Nos., Distance Bush 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. - M-213 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Neck Ring 5 Nos., Motor Base 1 No., Guide Bush 6 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Epoxy Paint for Rotor 1 Job., N.R.V. Repairing 1 Job., Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-215 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Ring 2 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 Job., Thrust Bearing Repairing 1 Job., Stamping Repairing 1 Job, N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-429 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 4 Nos., Distance Bush 3 Nos., Neck Ring 5 Nos., Balancing of Rotor 1 Job., Shaft Stationing 1 Jobs., Labour Charges 1 Job.
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-439 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job, Thrust Plate Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-454 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Distance Bush 4 Nos., Balancing of Rotor 1 job., Epoxy Paint for Rotor 1 Job., Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Shaft Stationing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-351 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Guide Bush 3 Nos., Distance Bush 6 Nos., C.I. Stage Bowls 1 Job., Rotor end welding Turning & Polishing & Key way making 1 Job., N.R.V. Repairing 1 Job, Shaft Stationing 1 No., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no.- M-377 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 4 Nos., Distance Bush 4 Nos., Rotor Sleeve turning & Polishing 1 Job, Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Balancing of Rotor 1 Job., Housing Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 10 HP Skope make sub. Pump set no. – M-16 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Rings 2 Nos., Distance Bush 3 Nos., Rotor end welding Turning/ Polishing & key way making 1 Job., Stamping Repairing 1 Job, Balancing of Rotor 1 Job., Shaft Stationing 1 Job. Labour Charges 1 Job.
Repair and rewinding of 10 HP Skope make sub. Pump set no. – M-28 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 4 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job., Stamping Repairing 1 Job., Thrust Plate Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and Rewinding of 10 HP Skope make sub. Pump set no. – M-32 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Distance Bush 4 Nos., Guide Bush 3 Nos., Balancing of Rotor 1 Job., Epoxy Paint for Rotor 1 Job., Stamping Repairing 1 Job, Thrust Bearing Repairing 1 Job. Labour Charges 1 Job.
Repair and Rewinding of 10 HP Skope make sub. Pump set no. – M-38 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Guide Bush 3 Nos., Distance Bush 5 Nos., C.I. Stage Bowl 1 No., Rotor end welding Turning / Polishing & key way making 1 Job., N.R.V. Repairing 1 Job., Shaft Stationing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 10 HP Skope make sub. Pump set no. – M-45 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Rings 3 Nos., Distance Bush 3 Nos., Rotor end welding Turning / Polishing & key way making 1 Job., Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 10 HP Skope make sub. Pump set no. – M-63 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Connection Piece 1 No., Guide Bush 4 Nos., Distance Bush 3 Nos., Rotor end welding Turning / Polishing & key way making 1 Job., Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job.
Repair and rewinding of 10 HP Skope make sub. Pump set no. – M-78 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 7 Nos., Neck Ring 4 Nos., Balancing of Rotor 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job.
Repair and rewinding of 10 HP Skope make sub. Pump set no. – M-83 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Distance Bush 6 Nos., Rotor Sleeve Turning & Polishing 1 Job, Housing Repairing 1 Job., Balancing of Rotor 1 Job., shaft stationing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job.
Repair and rewinding of 10 HP Skope make sub. Pump set no. – M-91 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 2 Nos., Neck Rings 2 Nos., Rotor end welding Turning / Polishing & key way making 1 Job., Balancing of Rotor 1 Job., Thrust Bearing Repairing 1 Job., Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Labour Charges 1 Job.
Repair and rewinding of 10 HP Skope make sub. Pump set no. – M-102 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 3 Nos., Neck Rings 5 Nos., Balancing of Rotor 1 Job., Motor Base Repairing 1 Job., Labour Charges 1 Job.
Repair and rewinding of 10 HP Skope make sub. Pump set no. – M-108 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Distance Bush 5 Nos., Guide Bush 4 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., N.R.V. Repairing 1 Job., Labour Charges 1 Job
Sharma Engineering Enterprises
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .