SPL REPAIRS TO FURNITURE SHED (BLDG NO. SP 09) AT SUKNA MIL STN AND CERTAIN OTHER SANCTIONED WORKS UNDER GE SUKNA

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or broken boulders complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drain including necessary formwork etc complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.

M&L providing PCC 1:2:4 type B0, (using 12.50 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

M&L precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces etc in CM 1:6 complete all as specified and as directed.

M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for brick work with sub class ‘B’, old size brick straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 but except bricks complete all as specified and directed. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

S&F 40 mm thick flush shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE) / M/s Archidply industries ltd

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frame but exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S & F of 150 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutters including hinges, steel peg stay, complete all as specified and directed.

S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.and including P.C.C. (1:3:6) for filling in frame and fixing of hold fast, complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S & F in repairs galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples including wooden beads complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F of rolled mild steel sections as in framing of cladding, glazing, door or gates and the like fixed with angle cleats and connecting plates etc. confirming to Fe – 410 – W(Gde E - 250) quality 'A' complete all as specified and directed.

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.

S&F 4 mm thick pre-painted E-fibre board Designer/Decorative fixed or laid/ inserted to and including Anodised aluminium snap grid frame size 605x605 mm work for false ceiling Hangers with 6 mm dia. G.I. (length as required) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including cover fillets complete all as specified and directed. Make of boards:- Everest / Visaka Industries / Lafarge / Armstrong Make of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.

M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheet and brick wall, thickness of concrete bed exc. 5 cm and not exc. 10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork complete all as specified and directed.

M&L Bricks, sub class B,laid flat in drain old size brick bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed

M&L Bricks, sub class B,laid flat in drain old size brick bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 but except bricks complete all as specified and directed

M&L Bricks, sub class B,laid on edge, in drain old size brick bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed

M&L for 40 mm thick cement concrete, type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) as in flooring laid in alternate bays and finishing the surface even and smooth without using extra cement including formwork complete all as specified and directed. Note: Glass strips measured and paid separately.

M&L for Glass dividing strips, 38 x 3 mm thick and inserted in position to confirm to design complete all as specified and directed.

M&L for repair to broken/damaged RCC chajjas by making good with PCC 1:2:4 type B1 or rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound to top and sides and rendering 5 mm thick to soffits in cement mortar 1:3 including necessary form work, reinforcement duly welded if required including demolition of broken/loose PCC or taking down old plaster at any storey of building complete all as specified and as directed. (Note: Rate shall be included for necessary scaffolding and safety arrangement)

Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 20 mm thick in CM 1:6 acomplete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd

M&L coloured glazed ceramic tiles 350x250x7 / 450 x 350 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd

M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 20 mm thick screed bed in CM 1:6, including taking downcomplete all as specified and directed. Make :- Lovely / Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles

M&L machine cut kota stone flooring 20 mm (minimum) thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing and laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L machine cut kota stone 20 mm (minimum) thick as in skirting, dado, riser of steps, plinth, etc, laid over and including 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the stone and including rubbing / grinding and polishing complete all as specified and directed.

M&L 100 mm thick, PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and fair without using extra cement complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and fair without using extra cement complete all as specified and directed.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, sub floors, etc complete all as specified and directed.

M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for 25mm thick cement concrete, 1:2:4 (12.50mm graded stone aggregate) as in flooring, etc, finished concrete surfaces even and rough to receive cement screed complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 (drain) on fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington

S & F 3 mm thick frosted glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington

M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M & L for preparing old decorated plastered walls surfaces and applying two coats of cement base paint after complete removal of wall finish complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

M&L for preparing old surfaces of walls (old decorated plastered or unplastered) and applying one coat of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

S&F 450 mm bore Reinforced concrete pipes, class NP2, laid in trenches and jointed with collars in cement and sand mortar 1:1, including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately ).

Taking up or down 15 mm dia steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank including dismantling of old tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Polywell Make of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf

S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd.

S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd.

S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and including connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware, Cat No. - 20042 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)

S&F in repairs vitreous china wash hand basin white flat back of size not less than 630 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware, Cat No. - 10010 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs vitreous china urinal half stall type, of size not less than 375 x 390 x 590 mm, white including chromium plated urinal spreader & waste coupling complete all as specified and directed. Make:- Hindware / Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)

S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Make:- Parryware, Cat No.- E8055 or equivalent in Cera(1st quality) / Hindware / Essco

S&F in repair swivel shower rose size 125 mm of brass chromium plated any colour (minimum weight 40 gms) for fixing with 15mm dia steel pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag

S&F in repairs 75 mm bore PVC (SWR) floor trap/(Nahani trap), plain with grating and including jointing with solvent cement complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S & F of 15 mm bore bib tap long body, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Essco, Cat No. - SQT-511KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs angle stop cock / angle cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, concealed type, chromium plated long thread with flange including CP nipple and socket complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S & F stainless steel grating 100 mm dia complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls and including taking down of old materials complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S & F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls and including taking down of old materials complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F in repairs PVC (SWR) 75 mm bore bend, of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F in repairs PVC (SWR) 110 mm bore bend, of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 450 mm bore pipe complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Dismantling bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) Laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position in framed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.

MS ORIENT ENGINEERING WORKS

R N SAH N CO

PS ENTERPRISE

SHANTI UDYOG

D K SARKAR

SHIVALAYA ENTERPRISES

MS ESSCON