BEAUTIFICATION OF THE BIRTHPLACE OF LORD BIRSA MUNDA IN VILLAGE ULIHATU UNDER KHUNTI DISTRICT AND TRANSFORMATION AND CONSERVATION WORK AS PER THE RURAL ENVIRONMENT

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In Cement Mortar(DSR 2023-15.9.2)

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.(DSR 2023-15.18)

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.(DSR 2023-15.57)

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.7)

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.4)

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.10)

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.11)

Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.12)

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.(5.1.1)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.(DSR 2.7) Hard rock (blasting prohibited)(2.7.2)

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50Mand lift of 1.5M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)(5.1.7)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).(5.1.10.)

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.(5.6.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level(5.3.1) 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)(5.3.1.4)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size)(5.3.9.1)

Centering and shuttering including strutting, propping etc. and removal of form for :(42858) Foundations, footings, bases of columns etc. for mass concrete.(5.3.17.1)

Columns, Pillars, Piers, Abutments, Posts and Struts(5.3.17.6)

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick(5.3.17.21)

Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. Taking 8mm TMT FE 500 ( only valid for SAIL & TATA STEEL)(5.5.4)

Providing Tor steel reinforcement of 10mm, 12mm & 16mm mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})(5.5.5 (c))

Providing randam rubble stone masonry in CM (1:4) in superstructureincluding cost of screening of materials scaffolding raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.(47970)

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.(40665)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent(DSR 11.56.1)

Providing edge moulding to 18mm thick granite stone including machine polishing to edge to give high gloss finish etc, complete as per desing approved by Engineer-in-charge(DSR 8.3.2)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes(DSR 10.16.1)

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.(DSR 12.20)

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.(DSR 22.24A)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work(DSR 18.9)32 mm nominal outer dia. Pipes.(DSR 18.9.4)

40 mm nominal outer dia. Pipes.(DSR 18.9.5)

Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(3.3.1)(i) For classification of soil item-A()

(ii) For classification of soil item-B()

Earthwork in back filling the trench after laying different types and sizes of R.C.C. spun pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(3.3.2)

Extra for earthwork in all kinds of soil for each additional lift of 1M. or part there of over the initial lift of 1.5M. as per specification and direction of E/I.(3.3.3)

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of join

ts etc. complete :(DSR 19.6) 150 mm dia. R.C.C. pipe(DSR 19.6.2)

300 mm dia. R.C.C. pipe(DSR 19.6.4)

(b) From 51.0 M to125.00 M()

(c) From126.0 M to150.00 M()

Development of tube well in accordance with IS 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required tile till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, colleting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete including hire & labour charges of air compressor, tools & accessoires etc. all as per requirement and direction of Engineer-in-charge.(PHED -M1042 PG-63)

Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of 200mm dia(DSR 23.13.3)

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS:2800 (Part-1) including necessary bolts & nuts of required size complete(DSr 23.14.3)

Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided.The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP(Supply PHD pg. - 64 M 1055)

Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes , all complete job as per direction of E/I.(M-1065 PG.74)

Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I.(PHED Page no- 36 Item no.- M930- K+1051,PG51)

POINT

METRE

2 x 4sqmm. + 1 x 2.5sqmm earth wire(1.7.3)

2 x 6sqmm. + 1 x 6sqmm earth wire(1.7.4)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(1.31)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.(1.32)

S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.(9.3 (Pg-89)) 12W LED Round light(9.3.2)

Installation, testing and commissioning of Ceiling fan, icluding wiring the down rods os standard length (Up to 30Cmm) with 1.5 sq. mm FR PVC insulated, copper conductors, single core cable etc. as required.(1.44)

Supply, installation, testing and commissioning of of following size ceiling fan 3 blades confirming to IS:- 374:2019 including wiring tne down rods, of standard length (up to 30 cm) with 1,5 FR PVC insulated, copper wire suitable for 230 Volts, 50 Hz, single phase supply etc. complete as required.( BLDC 5 Star (32 Watt) IS:374:2019 (energy efficient fans and two yeas warranty ) (Make:- Usha, Havells, Crompton, GEC & Model nos. of Fans are to be approved by Engineering Incharge & Consultant before procurement.) Supply of 48" (1200 mm) Sweep Ceiling fan BLDC 5 Star (32 Watt) IS:374:2019 (energy efficient fan. Make :Usha/Crompton/ Havells/GEC.(9.4.3 (Page. no.- 90))

Supplying and fixing following way single pole & neutral ,sheet steel, MCB distribution board, 240 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.(12 Way Double Door(2.8.9 (Pg-77)

Supplying and fixing following rating, 240 V/415V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required(2.12) 6A Single Pole,16A Single Pole,25A Single Pole,10A Single Pole(2.12.1)

32A Double Pole(2.12.5)

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required(2.11)

Supplying and fixing following rating, double pole, (single phase and neutral), 230 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.16/25A(2.16.1)

accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required(3.2)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required(3.6)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm(3.9)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.(3.15)

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required(4.2)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)(4.7)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)(4.8)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required(4.12)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm(5.1)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required(1.21.2) 25MM

Supplying, installation, testing & commissioning of 5KVA online single phase output power system of input voltage range 200/208/240/300V AC, frequency range 40Hz-60Hz, output voltage 230V(+-1%), frequency range 50Hz(+-1%), Harmonic distortion -<2% THD (Linear Load) : 5%THD (non-linear load) with all protections like short-circuit and overload etc. all complete as required.(JSR ELEC 22 M-1507 Pg-58)

Supplying, installation, testing & commissioning of 100 Ah tubular lead acid battery with 36 month replacement guarantee and as per IS:1652, 1991 all complete as required.(JSR ELEC 22 M-1533 Pg-60)

Supplying, installation, testing & commissioning of trolley for double battery with all accessories as required.(JSR ELEC 22 M-1532 Pg-59)

Supplying and drawing following size frls pvc insulated copper conductor single core cable in existing steel/pvc conduit(1.7.11) 4 x 10sqmm. + 2 x 6sqmm earth wire

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.(1.33)

Supplying and fixing batten/ angle holder including connection etc. as required.(1.34 (Pg-74))

9/10 Watt LED Bulb(M-855 (Pg- 54) (With O.H + C.P @14.95%))

S.I.T.C of following rating LED flood lighting luminaire with pressure die cast housing and toughened glass coer (IP 66 protection for single phase supply voltage 1-27V AC, 5Hz. Luminaire shall conform to IS:3022 part-5/ section-5 or IEC:62722 with all necessary accesories as required.(9.2 (Pg-89))60W LED Flood light(9.2.2)

S.I.T.C of following rating surface mounted LED tube lightfitting suitable for 230V 50Hz, single phase supply etc. complete as required.(9.5.2 (Pg-90)) 20w/22w LED tube

12" (300mm) Exhaust fan(M-775 (Pg- 52) (With O.H + C.P @14.95%))

Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of he above fan making good the damage, connection, testing, commisionig etc as required.(1.48 (Pg-72))

Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.4 Way (4+12) Double Door, Horizontal type(2.9.4 (Pg-77))

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(DSR-22 9.1) 4 X 10 sq. mm(48823)

4 X 16 sq. mm(48823)

3½ X 35 sq. mm(44440)

Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2(JSOR Elec- 22 Pg. no-20) 4cx 16 sqmm(M-740 (With C.P & O.H. 14.95%))

4cx 10 sqmm(M-739 (With C.P & O.H. 14.95%))

3.5cx 35 sqmm(M-327 (With C.P & O.H. 14.95%))

Providing, laying and fixing following dia RCC NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2(1 cement: 2 fine sand) including trenching (75 cm deep) and refilling etc as required.(DSR-22 14.14.1) 100 mm dia

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required(DSR-22 2.21)

Dismantling Pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/|(5.10.1)

Dry stone pitching 22.5 cm thick including supply of stones andpreparing surface complete.(DSR 16.11)

Providing and laying gang saw cut 30 mm thick, mirror polished premoulded and pre polished machine cut granite stone of required sizeand shape of approved shade, colour and texture in footpath, flooringin road side plazas and similar locations, laid over 20mm thick baseof cement mortar 1:4 (1 cement : 4 coarse sand) including groutingthe joints with white cement mixed with matching pigment, epoxytouch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of colour black, cherry/ruby red of arealess than 0.50 sqm.(DSR 16.87.1)

Providing and fixing 10x10x7.50 cm Granite stone block hand cutand chisel dressed on top, for paving in floors, drains etc. laid over20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints10mm wide filled with same mortar including ruled pointing etc.complete as per direction of engineer-in-charge.(DSR 16.92)

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand)(DSR 7.6)

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).(DSRItem 2.2 Page 81)

Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).(DSRItem 2.3 Page 81)

Spreading of s

ludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).(DSRItem 2.8 Page 81)

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge(DSRItem 2.9 Page 81)

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.(DSRItem 2.33 Page 89)

Centering and shuttering including strutting, propping etc. and removal of form for:(5.3.17) Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick. (5.3.17.20 )

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(DSR 13.47.1)

CARRIAGE OF MATERIALS (including C.P. 10%) Bricks (1K+ 7P = 8 KM.)

Course Sand (10 KM.)

Stone Chips (22 KM.)

Stone Metal ( 22 KM.)

Panelled Teakwood Doors : Size of door is supposed to be 50mm X 1000mm X 2150mm, Chowkhats of teakwood to be provided, Concealed hinges of make Ebco or equivalent to be provided, Concealed auto-door closure to be provided of make Ebco or equivalent, Mortice door lock of make Dorset or equivalent to be provided, Teakwood panel doors and teakwood chowkhats to be finished with weathercoat PU polish of make Sirca or equivalent.(NS-1)

Panelled Teakwood casement windows : Size of window is supposed to be 35mm X 900mm X 1200mm, Window frames of teakwood to be provided, Casement hinges of make Ebco or equivalent to be provided, Teakwood panel windows and teakwood window frames to be finished with weathercoat PU polish of make Sirca or equivalent.(NS-2)

Panelled Teakwood casement windows : Size of window is supposed to be 35mm X 1200mm X 1200mm, Window frames of teakwood to be provided, Casement hinges of make Ebco or equivalent to be provided, Teakwood panel windows and teakwood window frames to be finished with weathercoat PU polish of make Sirca or equivalent.(NS-3)

Wall Mud Plaster : plaster to be stabilized with sand / husk / cement, base coat of stabilized mud plaster to be minimum of 9mm in thickness.(NS-4)

Lime Coating over Mud Plaster area : the finish coat of lime to be of minimum 3mm in thickness(NS-5)

Providing & laying Polished Red-Oxide I.P.S. Flooring : Base Layer of 12 mm thick PCC 1:2:4 ( 1 portion cement, 2 portion sand, 4 graded stone aggregate of size 12 mm and down), A 7 mm thick plaster with CM 1:2 is used for finishing, then polished for final finish.(NS-6)

Providing & laying Polished Red-Oxide I.P.S. in skirting/dado : 7 mm thick plaster with CM 1:2 is used for finishing, then polished for final finish.(NS-7)

Providing and fixing BAMBOO CEILING at all height including providing and fixing of frame work made of special sections all complete.(NS-8)

Providing and fixing of Terracota Tiles on MS/ bamboo structure with complete waterproofing solution as per the following layers 1. 12mm thk. Cement Board (joints filled with PU sealant) 2. APP membrane waterproofing 3. Terracotta tile (Khapda) using cement mortar(NS-9)

Providing and installing Canvas Paintings – realistic (framed with glass top and wooden beading) by reputed artist, incl. design and materials.(NS-10)

Providing and fixing Metal plaque signage (for terracotta mural description)*(NS-12)

Making and installing Life size Bust of Bhagwan Birsa Munda, over wooden pedestal, incl. design and materials.(NS-13)

Providing and fixing treated Bamboo roof structure in rafter-purlin arrangement, using combination of bamboo varieties Bambusa tulda, Bambusa balcooa and Bambusa bambos, after removing existing roof structure. The structure is excluding cement board sheet, waterproofing and terracotta tiles.(NS-14)

S.I.T.C of following rating suspension mounting track lights for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-3 with all necessary accesories as required.(MR) Track Type & Finish - Material – Aluminum, Color – Black Powder Coated Track with appropriate quantities of Live End, Dead End, Straight Connector etc.() 20W LED Track light(MR)

Track light - Black Color Powder Coated(MR)

Supply , Installation, Testing and Commissioing of 1/2.8 '' 2.1MP CMOS Starlight Sensor Bullet Camera with effective 1945(H) X 1109(V) pixels, Fixed lens 4 mm , Video Compression H.265, H.264,M-JPEG , Color: 0.03Lux)/F2.0, 0 Lux (IR On), Smart IR Distance 80ft, True WDR 120dB , Auto Iris , Dual Streami

ng , Frame rate 30 FPS on 1080p resolution , Smart advanced video Compression, Electronic Shutter Speed Auto / Manual (1/15 ~ 1/32000), Anti- Flicker, Slow Shutter (1/2,1/3,1/5,1/6, 1/7.5,1/10), 3D DNR , Support SD card , Audio Input & Output ,Alram Input & output ,Polygon motion detection , Privacy masking, ONVIF ,Ethernet port 10/100 Mbps, ,12DC, PoE, Metal body, IP66 protection Certificate UL, BIS, EN , FCC & RoHS Certification. 3 Years Standard Warranty(MR)

Supply , Installation, Testing and Commissioing of Professional Video Control Operations Management Playback Recording Single Server Multiple Client Video Surveillance 64 bit Software with Single channel camera licensce with unlimited clients supporting 5000+ Camera models and 15000 devices at SDK level , Onvif S supported, edge base recording , advance maps, advance event and action manager with streaming server supporting optional edge or server level analytics at extra charges and optional facial recognition with 2 year standard support pack included Make: Milestone/ Wavesys/ Genetec(MR)

Supply , Installation, Testing and Commissioing of Tower Mount upto 6 Camera Channel Recording & Monitoring NVR Single Socket Intel Xeon Scalable Processor, (6) DIMM slots, (4) 3.5" internal Drive Slots, 1 NVMe M.2, 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 (in x8), (2) GbE ports, Aspeed AST2500 BMC, 500W Power Supply. Intel Xeon Bronze 3206R 8 core Processor (11M Cache, 1.90 Ghz), 64GB DDR4 RDIMM, PCI 500GB NVMe M.2, Nvidia Quadro T400 8GB DDR6 Graphic Card, Win. 10 professional 64 bit. VCOMPRS Software Channel Prices extra Make: Milestone/ Wavesys/ HP/ Dell(MR)

Supply, Installation, Testing and Commisioning of Twin RJ45 Connectors IO Box.(MR)

Supplying and Laying of 1 pair CAT-6 cable(MR)

Supplying, installation, testing & commissioning of 5 meter LED strip with driver/adapter/transformer having 120 LEDs offering 460 lumens/meter appropriate wattage LED Strips for cove lighting with all accessories as required.(MR)

Supplying, installation, testing & commissioning of IP-66 2W Uplighter Downlighter Robo LED lights for boundary walls with all accessories like driver, mounting etc. as required.(MR)

Supply, installation, testing & commissioning of 12 watt LED Garden spike light for illumination of trees and hedge.(MR)

S.I.T.C of following rating approved make LED bollard fitting with cylindrical shape and inverted cone shape head of height 4000mm power input 10 watt with die cast aluminium housing opel with PC diffuser, IP:65/54 protection, conforming to IS:10322 part 5 etc all complete as required.(MR)

Supplying, Installing, Testing & Commisioning cost of Main LT Panel all complete with all necessary items as per SLD.(Aanalysis Rate)

Supplying, Installing, Testing & Commisioning cost of Feeder Pillars all complete with all necessary items as per SLD.(Aanalysis Rate)

Supply and fixing single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required complete on wall.(MR)

Supply and fixing glass framed shock treatment chart.900mm x 600mm high, printed preferably in three languages i.e. Hindi, English & local language;(MR)

Supply and installation of DCP type fire extinguisher of capacity 5 kg with upright operation conforming to IS:2171 having a jet length of 8m with discharge time of 10 sec including all accessories.(MR)

Standard first aid box - prescribed by St.John Ambulance brigade or India Red Cross shall be provided (First aid box should be of 18 gauge M.S sheet of size 14" x 17" x 5"):-(MR)

Supply of MS Items like Insert plates, angle iron, flats, supports, channels, etc.for cable trays/trenches/customized trays and wherever required with 2 coats yellow synchromate primer and 2 coats of enamel paint.(MR)

Providing and fixing granite bench of size 2.4 meters (L) × 0.45 meters (W) × 0.45 meters (H), consisting of local exposed stone masonry for the base and a polished granite slab on top, ensuring durability and a smooth finish. The bench shall be constructed as per approved design, with uniform texture and color, free from cracks. All joints shall be properly aligned and finished to ensure a seamless appearance. The fixing shall be done using approved adhesive or mortar, ensuring stability and long-term performance. The work includes all necessary materials, labor, tools, and incidental works to complete the job as per the engineer’s specifications and site requirements.(MR)

Making and installing outdoor Ulgulaan Mashaal sculpture of ht. 4.5m, by reputed artist, incl. design and materials.(MR)

Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3- 4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.(NS-LS-1)

Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.(NS-LS-2)

Providing and stacking of Hibiscus variegated of height 60-75 cm. with healthy variegated foliage in earthen pots size 25 cm as per direction of the officer-in-charge.(NS-LS-3)

Providing and stacking of Jatropha multifida (red colour) of height 60-75 cm. multibranched in p.bag of size 25 cm as per direction of the officer-in-charge.(NS-LS-4)

Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge.(NS-LS-5)

Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge.(NS-LS-6)

Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 75-90 cm. with 5-6 branches in bag of size 25 cm as per direction of the officer-in-charge.(NS-LS-7)

Providing and stacking of Tecoma stans of height 90-105 cm. bushy in big size HDPE bag as per direction of the officer-in-charge.(NS-LS-8)

Providing and displaying of Areca Palm having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.(NS-LS-9)

Providing and displaying of Dracaena song of India specimen (three in one), having ht. 60 cm & above, well developed, fresh and healthy with good foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.(NS-LS-10)

Providing and displaying of Raphes palm having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed, full of fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.(NS-LS-11)

Providing and Displaying Acalypha twisted well developed with fresh & healthy 30 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.(NS-LS-12)

Providing and stacking of Ophiopogon jaburan ( va

riegated ),full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.(NS-LS-14)

Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.(NS-LS-15)

Providing and stacking of Daniella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.(NS-LS-16)

Add 18 % GST

Add 1% Labour Cess