Repair and renovation of ex...

Amount

NS Items

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/1S 1239 including welding. fittings like elbows. tees, flanges, tapers, nuts bolts. gaskets etc. and fixing the pipe on the wall/cei!ing with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 32 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/1S 1239 including welding. fittings like elbows. tees, flanges, tapers, nuts bolts. gaskets etc. and fixing the pipe on the wall/cei!ing with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 25 mm dia

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories Pendent Sprinkler (DSR- 18.21.1)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 2 way 100 mm dia MS pipe (DSR 18.19.1)

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. (DSR- 18.20)

Providing and fixing flow switch in following sizes MS pipe including connection etc as required 100 mm dia (DSR- 18.23.1)

Supply and Installation of 2 Hrs. ( 120 minutes) Fire Rated approved make G.I Steel Door with Powder Coating Finish As Per IS-3614 and BS-476N Part 20 and 22. Frame :- Profile to be Single Rebate of dimension 143 mm X 57 mm made out by 18 gauges G.I- Sheet, with bending radius of 1.2 mm with mortar guard and reinforcement pads for fixing of hardware. Finally finish with stove zinc phosphate etched primer coating, with anti- corrosive Pure Polyester of 80-90 MICRON approved / desire shade. Shutter : - To be Pass Formed to 46 mm thick made out by 2 nos. of 20 gauges G.I Sheets, with lock seam joints at stile edges , have no visible screws, Internal reinforcement to be provided at top, bottom, stile edges for desired fire rating, Shutter to be factory prepared with pre-punched cut outs and reinforcements to receive ironmongery. Finally finish with Powder Coating Finish with Powder Coating Finish with anti corrosive Pure Polyester of 80-90 MICRON approved / desire shade.(DOOR SIZE FD 120MIN SIZE= 2.0X2.1 MT,FOR 22DOOR) (ISI CODE- 3614)

Supply and installation of burden type stainless steel dial type pressure guage with brass isolation valve and pipe (for each pump room)

Supply and installation of lift pressurization fan 8500 CFM

Supply and installation of lift pressurization fan panel

Bidder Name

Amount

M/s Daksha Construction (GSTN-06ATMPK0334NIZI) BID ID -1199738