PROVN OF VEH WASHING POINT AND RAMP FOR LOADING AND UNLOADING OF C VEH IN 69 ENGR REGT AND PROVN OF CHAIN LINK FENCING ALONG WITH BARBED WIRE IN SEC A GOMAT UNDER AGE (I) POKARAN

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth etc. in any type of soil complete all as specified & directed by Engineer-in-charge

Surface excavation n exc. 30cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed.

M&L cement concrete in foundation type D2 1:4:8 using (40mm graded aggregate) as in foundation complete all as specified & directed by Engineer-in-charge

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified & directed by Engineer-in-charge.

Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface omplete all as specified & directed by Engineer-in-charge.

M&L plain Cement concrete type D-2, 1:4:8 using (40mm graded stone aggregate) ,100 mm thick as in flooring omplete all as specified & directed by Engineer-in-charge.

M&L plain Cement concrete type B-1, 1:2:4 using (20mm graded stone aggregate) ,100mm thick as in flooring finishing cement concrete surface even and smooth with using extra cement omplete all as specified & directed by Engineer-in-charge.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point omplete all as specified & directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm omplete all as specified & directed by Engineer-in-charge.

S&F GI tubes md grade galvanised with all fittings & fixed complete to walls & ceiling or laid in trenches/floors 20mm bore omplete all as specified & directed by Engineer-in-charge.

S&F 20mm bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe omplete all as specified & directed by Engineer-in-charge.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A omplete all as specified & directed by Engineer-in-charge.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6 omplete all as specified & directed by Engineer-in-charge.

M&L cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in coping on brick masonry wall including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete sur faces in cement mortor (1:4) finished the surface even and smooth without extra cement complete all as specified & directed by Engineer-in-charge.

M&L cement concrete in surface channels and drains type B2 1:2:4 using (40mm graded aggregate) as in foundation Cement concrete in surface channels and drains

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified & directed by Engineer-in-charge.

S&F Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed by Engineer-in-charge.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified & directed by Engineer-in-charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded aggregateas in foundation, filling in mass concrete for manholes & drains complete all as specified & directed by Engineer-in-charge.

S&F for Mild steel(Fe-410-W) bars 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends with binding line wire for chain link fencing complete all as specified and directed.

Material and labour for two coat of synthetic enemal paint on steel surfaces over a coat of red oxide primer Surfaces of any des-cription, over 10cm in width or grith, not otherwise described complete all as specified & directed by Engineer-in-charge.

Supply only MS screw bolts (Machine made) length of bolt exc 5 cm but not exc 10 cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 5 to 10mm complete all as specified & directed by Engineer-in-charge.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails & guides) and hanging also fastening & complete all as specified & directed by Engineer-in-charge.(Fe 410 -W (Gde- E- 250) quality-A) complete all as specified & directed.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed by Engineer-in-charge.

M/s Shri Inder Construction Company

rathore construction co.