Tender ID

Karnataka

Retender

Works

Electrical

Providing line Shifting of 11KV/D/C/LT/HT Line from Sri Chowdeshwarai Temple to Mata Gadde Road (Via Halu Halappagowda House Mata road, Kadlemakki Masidi) at Balagadi Balehonnuru Section, Koppa Tq Chikkamagalur Dist.

Public Works Department

PWD Electrical Division Office Bengaluru | Karnataka

Amount: Refer DocsCloses: 4 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published20 Aug 2024
Closed4 Sept 2024
Retendered20 Aug 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 20 Aug 2024

Tender Value

Refer Docs

EMD Value

₹54,000

Closing Date

4 Sept 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Chetan

Mobile Number

Work Description

Providing line Shifting of 11KV/D/C/LT/HT Line from Sri Chowdeshwarai Temple to Mata Gadde Road (Via Halu Halappagowda House Mata road, Kadlemakki Masidi) at Balagadi Balehonnuru Section, Koppa Tq Chikkamagalur Dist.

Tender Information

Tender ID

PWD/2024-25/EL/WORK_INDENT11059

Reference Number

PWD/2024-25/EL/WORK_INDENT11059

Tender Type

Open

Product Category

Electrical

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Electrical Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredClass-3 and Above Electrical Inspectorate Registration Certificates

RequiredAnnual Turn Certificate with Balance Sheet & Profit and Loss Statement certified by a Registered Charted Account

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent.

RequiredBankers Certificate issued by Nationalized Bank in prescribed format. Tender capacity statement.

RequiredOngoing and existing commitments details

RequiredThe Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending contractors are requested to note that, they should abide by the detailed instructions and conditions contained in the KW-2 tender document and further documents there on.

The cable trench, horizontal duct drilling and laying shall be executed as per ISS No.1255-1967 duly taking all necessary precautions permissions to be got approved by the concerned authorities for digging works. However, necessary letters to be addressed to facilitate for approval with the concerned department.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification, the contractor shall produce the purchase bills

The contractor shall guarantee all the materials supplied by him including erection, electrification work for trouble free top class performance and against manufacturing defects for a period of one year from the date of satisfactory completion, commissioning and handing over to user department. The contractor shall make his own arrangement for rectifying defects/replacement of defective materials immediately on receipt of intimation from executing authority and power supply shall be restored. Failure of which, action will be taken to get the work rectification through other agency at the risk and cost of the contractor.

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

The contractor shall not deviate/alter/execute excess quantities or additional items without prior approval.

It is the responsibility of the contractor to pursue and obtain all necessary approvals related to work from respective departments.

During the execution of any Minor Civil works or any other minor works which are to be executed, has to be done by the bidder from his end without any charges.

The contractor should see that the existing installation and working of the same are not affected during execution. Only after satisfactorily completion, and charging of new lines, the existing installation, if any shall be dismantled by duly informing to the Department. A site order book of the work shall be maintained and the contractor shall acknowledge the order given by the officers and shall carryout accordingly.

The tenderer shall pass on to the department all the warranties, benefits etc. From the original equipment manufacturers.

Maintaining and supervising all safety precautions and programs in connection with the work and shall comply with all laws, ordinances, codes, rules, regulations and lawful orders of any public authority having jurisdiction for the safety of persons or property or to protect them from damages, injury or loss during the entire contract period, including non-working hours. Contractor shall maintain first aid facilities at site. All critical injuries shall be reported promptly to Engineer with a copy of Contractors report covering each personal injury, requiring the attention of a physician.

The Contractor shall submit to the employer, for his review and approval, all shop drawings, samples, materials lists, equipment data, instruction manuals, record documents, manufacturers equipment manuals, and other information required by the Contract Documents, before use and execution and before bringing the material at Site.

The Contractor shall supervise and carry out the Works as per the approved shop drawings or part there of efficiently and with his best skill and attention. He shall be solely responsible for means, methods, techniques, procedures and sequences of construction. The Contractor shall coordinate all parts of the Works and shall be responsible to see that the finished work complies fully with the Contract Documents, and such other instructions and variation orders as the Engineer may issue during the progress of the Works. The Contractor, at no point of time, shall blame the Owner and or the Project Management Consultant, for the wrong doings of the Contractor, in any part of Works

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund

Conditional Tenders will not be accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority not below the rank of Executive Engineer Or District level Officer and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification.

The tenderer shall scan the original ownership document/ lease / hire commitment Agreement scanned file to the Bid. The Original Documents shall be produced at the time of opening of Technical Bid.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

Tenderer shall note that the tenders those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers.

All materials required for this work, shall be procured by the Tenderer himself and should be got tested by the quality control authorities, at his own cost before use on the work

The entire work shall be carried out under the direct supervision of Officers in charge, Executive Engineer (Elect) and Assistant Executive Engineer (Ele.) .In all cases of differences, disputes, etc., regarding the interpretation of specification of condition in general with any of the work, the decision of E.E.(Elec) PWD Division, Bangalore shall be final and binding on the contractor.

SHOP DRAWINGS: Contractor must submit well in advance shop drawings for approvals by the Engineer-in-Charge and approvals must be obtained before proceeding for execution of the works. DIGITAL FORMAT: All the Documents and drawings shall be as a Hard copy as well as on a Digital format in requisite numbers as per the direction of the Engineer-in-Charge

The project shall be completed well within the contract period, the Tenderer should maintain the works of his scope during the defect liability period, which is 1 Year after the successful completion of the work

The tender must furnish all technical qualification information in the prescribe formats as per KW -2 Standard tender document and should be signed by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Safety to contractor work men/ General public is the responsibility of bidder / LEC.

Co-Ordinating / solving the right of way problems is responsibility of LEC, in co-ordination with PWD/ local authorities MESCOM.

Tree Cut/ trimming of trees, in Co- Ordination with forest Dept. etc., is the responsibility of bidder / LEC in the way of shifting lines etc.

Co-Ordinating line clear works with MESCOM is the responsibility of bidder in consultation with local MESCOM officers.

Getting electrical inspectorate approval to the shifting of lines/ TC work etc., is responsibility of contractor, however statutory fees paid by contractor will be reimbursed from PWD.

Returning of released materials to local MESCOM stores and to produce ACK of stores officer and joint inventory with MESCOM authorities before final measurements is the responsibility of contractor.

Bidder should plan for all the extra materials if required incidental to the shifting works and stick to the time schedule for shifting of works. Delay of works attract huge penalties as recommended by AEE (E) in charge of works.

All the electrical materials which are bind to be used shall be got inspected from the TAQC MESCOM

The Work should be carried out as per the list of makes uploaded.

Clause 25.5 stipulates for Tenderer to produce detailed rate analysis for various items if tender is seriously unbalanced. (i.e. ., where quoted rates are very high as well as where the quoted rates are less than estimated rated).

The Contractor shall obtain all necessary clearance from electrical inspectorate TA&QC as per MESCOM for erection & commissioning of VC breakers/ Transformers/HT Cables/Metering cubicles etc.

The contractor should arrange for the visit of The Executive Engineer (Elect.) And Assistant Executive Engineer (Ele.), PWD Electrical Division to the manufacturing premises for inspection and conducting tests as per ISI specifications on 11 KV XLPE UG cable and Breakers before dispatch of the materials at his cost, only after approval from the Executive Engineer (Elect.)/ Assistant Executive Engineer (Ele.), the materials shall be dispatched or otherwise the cable and HT Breaker will not be accepted at site. The manufacturer shall have all testing and laboratory facilities in their premises and contractor shall be present at the premises to make arrangements for conducting tests.

All materials required for this work, shall be procured by the Tenderer himself and should be got tested by the quality control authorities, at his own cost before use on the work.

The tenderer shall note that the tenders those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation.

After delivery at site, the materials will be inspected, if the materials do not conform to relevant ISS/ISI and technical specifications of KPTCL/BESCOM/MESCOM, then such materials will be rejected. The contractor shall remove the rejected materials at his own cost

It is the responsibility of contractor to co-ordinate with executing authority for commissioning the Breaker, HT/LT lines and TCs satisfactory by observing all formalities up to handing over to the user department. After this only, final bill shall be prepared.

It is the responsibility of contractor to observe all necessary formalities of MESCOM for charging the lines and taking over the infrastructure like breaker lines TCs by MESCOM and MT authorities for cables satisfactorily duly acknowledging the inventory of materials used in the work

It is the responsibility of the contractor in obtaining permission from the concerned railway authority for laying HT Cables across Railway crossings.

The Contractor must obtain the necessary approvals as per fire norms from the concerned fire authority.

It shall be the responsibility of the bidder to obtain necessary line clearance from MESCOM and special care has to be taken while working with live conductor. Department is not responsible for any untoward accidents.

The tenderer should declare & furnish the details of tools and machinery having with him to deploy on the work of Supply, installation, testing and commissioning of Transformers including distribution transformer, capacitor bank panel & other allied items to complete within the stipulated time.

The Tenderer Must have submitted the Certification of registration in the Labour department with the latest renewal.

As per the Govt. Order No PW2BMS2019 Bangalore Dated 19-06-2019 the applicable GST shall be paid to the SR Items separately.

The tenderer should furnish Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers detail

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

The Tenderer must submit ongoing and existing commitments details separately.

Technical Criteria

Past Experience

3.2To qualify for award of this contract, each tenderer in its name should have in the last Five years i.e. 2019-20 to 2023-24.b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work i.e., Shifting of HT / LT Lines Works of value not less than Rs 10.73 Lakhs in a single work.

Others -- Work done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

3.2To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 to 2022-23 c) executed in any one financial year, the following minimum quantities of work: 1. RCC/PCC Poles-99 Nos 2. Guy Set-52Nos 3.Rabbit Conductor-3.46Km (List of quantities to be uploaded by the Tenderer).

Others -- Quantity Executed List issued by an officer not below the rank of Executive Engineer/ Equivalent

Capabilities of Vendor

The tenderer as a Prime Contractor having valid Class-3 & above Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Others -- Electrical inspectorate License

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity - (AxNx2.5-B) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2024-25 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. 0.50 Years (06 Months) B - Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next. 0.50 Years (06 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Bid Capacity

The Tenderer must submit ongoing and existing commitments details separately.

Others -- Ongoing and existing commitments Works List.

Financial Status

The Bidders shall deposit E.M.D of Rs. 54,000/- through any e-payment mode.

Others -- EMD

3.2To qualify for award of this contract, each Tenderer in its name should have during last five years i.e., from 2019-20 to 2023-24.a) The tenders must have achieved in at least two financial years an average annual financial turnover of an amount Not less than Rs.21.46 Lakhs during last five years. with UDIN Number certified by Chartered Accountant, If Failed to Satisfy the condition tender will be rejected Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria.

Others -- Audited CA Certificate of Annual Turnover

3.3Each Tenderer should further demonstrate: (b) liquid assets and /or availability of credit facilities of not less than Rs.6.44 Lakhs (For Particular work only) (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)

Others -- Line of Credit Certificate

Others

The Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal.

Others -- Labour Department Certificate

Nil

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Fee & Financial Details

Tender Fee Amount

₹540

EMD Fee Amount

₹54,000

Important Dates

Last Activity

20 Aug 2024

Published

20 Aug 2024

Bid Opening

5 Sept 2024

Download Ends

27 Aug 2024

BOQ Preview

•

Supply & Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards(Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 including Digging...

•

Supply of Spiral Earth Electrode and Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) (Item no 2.16 page no 4 of 81 and 2.08 page no 44 of 81) (Material + Labour )B.R 332+...

•

Supply & Erection of RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No.BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 including Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC su...

•

Supply & providing of 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole (C,D.S Pg No 341/635 I .No 9.(a)) (Material + Labour )(B.R 918+ ASL 12%) ...

•

Fixing of V-Shape/Horizontal cross arm including Single Top

•

Support Brace and Insulator fixing (I.No5.03 Pg No 45 of 81)(Labour) (B.R 257+ ASL 12%) ---- including cost and conveyance of all materials,...

•

Supply & Providing of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) (Item no 6.06 page no 5 of 81) (Material )(B.R 205.00+ ASL 12%) ---- including cost and conveyance of all materi...

•

Supply & Providing of 11 kV, 45 kN Polymeric Insulator (Item no 6.10 page no 5 of 81) (Material )(B.R 186.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and other incidental ...

•

Supply & Providing Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 (C,D.S Pg No 344/635 I .No 24.(a)) (Material + Labour )(B.R 1763.00 + ASL 12%)...

•

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)(Item n...

•

ly & Erection of RCC Pole - 8 Mtr Long,115 Kg WL (Dwg No .BESCOM /GM /QS&S/05 Dtd 24.11.2018) as

•

per IS-78 including Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supports...

•

Supply of LT 2 Pin Cross Arm - MS (Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018) and Fixing of 2 Pin cross arm with Insulator and Braces fixing (I No.2.07 Pg No 4 of 81 and I No 5.01 Pg No 45 of 81 Volume...

•

Guarding between HT & LT Line ( Guarding Material (Rs. 93/Mtr))(C,D.S 5 Pg No 351/635 I .No 16.(a)) (Material + Labour )(B.R 6454.00+ ASL 12%) ---- including cost and conveyance of all materials, labo...

•

Supply & stringing of Rabbit ACSR

•

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM and Stringing of Conductor for Rabbit ACSR (Item no 7.02 page no 5 of 81 and 6.02 page no 46 of 81) (Material + Labou...

•

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,and Digging of Pit for providing GI Pipe type Earthing,Ordinary Soil (I No.51.01 Pg No 22 of 81 and I No 1.6.1 Pg No 43 of 81 Volume-6 ) (Material...

•

Supply & providing of 8 SWG GI Wire

•

(4.064 mm Dia), Std Wt: 131 Kg/KM (Item no 8.02 page no 5 of 81) (Material )(B.R 75040.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and ...

•

Supply & providing of 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM (Item no 8.01 page no 5 of 81) (Material)(B.R 77226.00+ ASL 12%) ---- including cost and conveyance of all materials, labour...

•

Guarding between HT & LT line 4 Pin Cross Arm with clamps, bolts, nuts and washers for

•

guarding (C,D.S Pg No 351/635 I .No 16.(b) ) (Material + Labour )(B.R 580+ ASL 12% ---- including cost and convey...

•

Supplying and providing LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC

•

Pole - 9 Mtr Long, 200 Kg WL (C,D.S Pg No 356/635 I .No 6) (Material + Labour )(B.R 423+ ASL 12%) ---- including cost and c...

•

Supplying and providing 11 kV GI Pin for 11 kV Ceramic Shell Insulator (Item no 6.02 page no 5 of 81) (Material)(B.R 66.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and oth...

•

Supplying and providing No.8 strain insulator (Item no 6.07 page no 5 of 81) (Material)(B.R 27.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and other incidental charges nec...

•

Supplying and providing Guy set with No. 8 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 (C,D.S Pg No 344/635 I .No 24(c) ) (Material+Labour )(B.R 1938.72+ ASL 12%...

•

Full threaded Bolt & Nut as per IS1367 6x150 mm(I No61.08 Pg No 27of 81 (Material)(B.R 5941+ ASL 12%) ---- including cost and conveyance of all materials, labour and other incidental charges necessary...

•

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at 9 Mtr RCC/PSCC Pole (I No,17.05.2 Pg No 51of 81 (Material )(B.R 142.00+ ASL 12%) ---- including cost and conveyanc...

•

Dismantling of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5

•

Mtr depth( I.No 2.01 Pg No 44 of 81 ) ---- including cost and conveyance of all materials, labour and other incidental charges necessa...

•

Releasing & Refixing of RCC Pole - 9 M Long, 145 Kg WL (CDS I.No 1 (b) Pg No 339 of 635 )(Labour ) ---- including cost and conveyance of all materials, labour and other incidental charges necessary fo...

•

Relasing & Refixing of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting o...

•

Releasing & Refixing of RCC Pole - Fixing of LT Protection Kit( I.No 15.03 Pg No 49 of 81 )(Labour ) ---- including cost and conveyance of all materials, labour and other incidental charges necessary ...

•

Releasing & Refixing of GOS including wiring (11 kV Single Break 200

•

Amps) ( I.No 13.02 Pg No 48 of 81 )(Labour ) ---- including cost and conveyance of all materials, labour and other incidental charg...

•

Releasing & Refixing of 11 kV, Solid Core Type HG Fuse Unit ( C.D.S-31 I.No 15 Pg No 384 of 635 )(Labour ) ---- including cost and conveyance of all materials, labour and other incidental charges nece...

•

Dismantling of 2 Pin cross arm with Insulator and Braces fixing) ( I.No 5.01 Pg No 45 of81) (Labour) ---- including cost and conveyance of all materials, labour and other incidental charges necessary ...

•

Dismantling of 4 Pin cross arm with Insulator and Braces fixing) ( I.No 5.02 Pg No 45 of 81(Labour ) ---- including cost and conveyance of all materials, labour and other incidental charges necessary ...

•

Supply & Erection of RCC Pole - 8 Mtr Long,115 Kg WL (Dwg No .BESCOM /GM /QS&S/05 Dtd 24.11.2018) as per IS-78 including Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supp...

•

Supply & Erection of Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding of 9M PSCC Pole with 300 Kg WL (C,D.S Pg No 339/635 I .No 4.(C)) (Material + Labour )(B.R 2227...

•

Supply & Providing of 11 kV, 45 kN Polymeric Insulator (Item no 6.10 page no 5 of 81) (Material )(B.R186.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and other incidental c...

•

Guarding between HT & LT Line ( Guarding Material (Rs. 93/Mtr))(C,D.S 5 Pg No 351/635 I .No 16.(a)) (Material + Labour )(B.R 4650.00+ ASL 12%) ---- including cost and conveyance of all materials, labo...

•

Supplying and providing 4 Pin Cross Arm with clamps, bolts, nuts and washers for

•

guarding (C,D.S Pg No 351/635 I .No 16.(b) ) (Material + Labour )(B.R 580.00+ ASL 12%) ---- including cost and conveyan...

•

Supplying and providing No.8 strain insulator (Item no 6.07 page no 5 of 81) (Material)(B.R 27.00 + ASL 12%) ---- including cost and conveyance of all materials, labour and other incidental charges ne...

•

Supplying and fixing LT 2 Pin Cross Arm - MS(Item no 2.07 page 4 of 81 and Item no 5.01 page 45 & 44 of 81 (Material + Labour )(B.R 292.00+ ASL 12%) ---- including cost and conveyance of all materials...

•

Supply & stringing of Rabbit ACSR

•

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM and Stringing of Conductor for Rabbit ACSR (Item no 7.02 page no 5 of 81 and 6.02 page no 46 of 81) (Material + Labou...

•

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at

•

workspot) NOTE:- Consolidated amount for both loading and unloading 9 Mtr RCC/PSCC Pole (C,D.S Pg No 480/635 I .No...

•

Supply of Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977For 25/63/100 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - MS (Materia) ( I....

•

Supply of GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,and Digging of Pit for providing GI Pipe type Earthing,Ordinary Soil (I No.51.01 Pg No 22 of 81 and I No 1.6.1 Pg No 43 of 81 Volume-6 )...

•

Supply of Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each (Item no 51.02 page no 22of 81 .(Material )(B.R 676.00+ ASL 12%) ---- including cost ...

•

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag (Item no 51.03 page no 22of 81 .(Material )(B.R 310.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and othe...

•

Digging of Pit for providing GI Pipe type EarthingOrdinary Soil(Item no 1.6.1 page no 43 of 81 .(Labour)(B.R 759.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and other inci...

•

Providing GI Pipe Earthing for Lightning Arrester,

•

Transformer Neutral and Transformer Metal parts (Excluding

•

digging of pits)Item no 8.05 page no 46 of 81 (Material )(B.R 190.00+ ASL 12%) ---- includ...

•

Supply & providing of 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM (Item no 8.01 page no 5 of 81) (Material)(B.R77226.00+ ASL 12%) ---- including cost and conveyance of all materials, labour ...

•

Supply & providing of 8 SWG GI Wire

•

(4.064 mm Dia), Std Wt: 131 Kg/KM (Item no 8.02 page no 5 of 81) (Material )(B.R 75040.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and ...

•

Supply & providingLT Protection Kit

•

(Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) and Fixing of LT Protection Kit (Item no 17.01 page 9 of 81 and Item no 15.03 49of 81 Volume-6) (Material + Labour )(B.R ...

•

Supply & providingLT Protection Kit

•

(Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) and Fixing of LT Protection Kit (Item no 17.01 page 9 of 81 and Item no 15.03 49of 81 Volume-6) (Material + Labour )(B.R ...

•

Supply & providing LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) SINGLE CIRCUIT iv) Spacer for DTC Wiring ( C.D.S-24 I No 14 b (iv) Pg No 370 of 635 ) (Material )(B.R 42.00+...

•

Fixing of 11 kV, HG Fuse Unit with Solid Core Insulator

•

(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)(Item no 20.01 page 9 of 81 49of 81 Volume-6) (Material )(B.R 1069.00+ ASL 12%) ---- including cost an...

•

Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross

•

arm and wiring(Item no 13.01 page 48of of 81 Volume-6) (labour )(B.R 237.00+ ASL 12%) ---- including cost and conveyance of all materials, la...

•

Supply & Fixing 11 kV, 200 Amps Single Break GOS (DwgNo.BESCOM/GM/QS&S/23 Dtd 24.11.2018) (Item no 24.01 page 11 of 81 and Item no 13.02 48 of 81 Volume-6) (Material + Labour )(B.R 10554.00+ ASL 12%) ...

•

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at 9 Mtr RCC/PSCC Pole (I No,17.05.2 Pg No 51of 81 (Material )((B.R 142.00+ ASL 12%) ---- including cost and conveyan...

•

Supplying and providing LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC

•

Pole - 9 Mtr Long, 200 Kg WL (C,D.S Pg No 356/635 I .No 6) (Material + Labour )(B.R 423.00+ ASL 12%) ---- including cost an...

•

Releasing and Restringing of Rabbit ACSR ( I.No 6.02 Pg No 46 of 81) (Labour) ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the successful comp...

•

Relasing of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transform...

•

Dismantling of of11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole (C,D,S I.No 9 (a) Pg No 341 of 635 ) ---- including cost and conveyance of all...

•

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved

•

DrawingOrdinary Soil (Item no 1.1.1 page no 43 of 81) (Labour)(B.R 629.00+ ASL 12%) ---- includin...

•

Supply & Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No.BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards including Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC...

•

Supply & Erection of RCC Pole - 8 Mtr Long,115 Kg WL (Dwg No .BESCOM /GM /QS&S/05 Dtd 24.11.2018) as

•

per IS-78 including Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supp...

•

Fixing of V-Shape/Horizontal cross arm including Single Top

•

Support Brace and Insulator fixing (I.No5.03 Pg No 45 of 81)(Labour)(B.R 257.00+ ASL 12%) ---- including cost and conveyance of all material...

•

Supply & Providing of 11 kV, 45 kN Polymeric Insulator (Item no 6.10 page no 5 of 81) (Material )(B.R.186.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and other incidental ...

•

Supplying and providing 4 Pin Cross Arm with clamps, bolts, nuts and washers for

•

guarding (C,D.S Pg No 351/635 I .No 16.(b) ) (Material + Labour )(B.R 480.00+ ASL 12%) ---- including cost and conveyan...

•

33kV Class HG Fuse Unit HG Fuse Unit (Item Code 3.01 Page No: 69)(B.R 2621.00+ ASL 12%) ---- including cost and conveyance of all materials, labour and other incidental charges necessary for the succe...

•

Wiring of 2 Circuits of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc...

•

Supplying and providing Guy set with No. 8 Strain Insulator & Concreting materials as per Dwg

•

No. BESCOM/GM/CP/7 Dt: 24.10.07 (C,D.S Pg No 344/635 I .No 24(c) ) (Material + Labour )(B.R 1713.00+ ASL 1...

•

Supplying and fixing LT 2 Pin Cross Arm - MS(Item no 2.07 page 4 of 81 and Item no 5.01 page no 44 of 81 (Material + Labour )(B.R 292.00+ ASL 12%) ---- including cost and conveyance of all materials, ...

•

Supply & stringing of Rabbit ACSR

•

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM and Stringing of Conductor for Rabbit ACSR (Item no 7.02 page no 5 of 81 and 6.02 page no 46 of 81) (Material + Labou...

•

Supplying and providing LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC

•

Pole - 9 Mtr Long, 200 Kg WL (C,D.S Pg No 356/635 I .No 6) (Material + Labour )(B.R 423.00+ ASL 12%) ---- including cost an...

•

Good Quality well burnt Charcoal for grounding

•

purposes packed in non returnable gunny bag of 30 Kg each (Item no 51.02 page no 22of 81 .(Material )(B.R 676.00+ ASL 12%) ---- including cost and convey...

•

Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Buildings & Bridges and such similar works in all kinds of soils , as per drawi...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Supplying, fitting and placing TMT FE 550/550D

•

Steel Reinforcement complete as per drawing and technical specification. Volume-1, 2.11h(B.R 79011.00+ ASL 12%) ---- including cost and conveyance of all...

•

Dismantling of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5

•

Mtr depth( I.No 2.01 Pg No 44 of 81 )(Labour ) ---- including cost and conveyance of all materials, labour and other incidental charge...

•

Dismantling of of11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole (C.D.S I.No-9 (a) Pg No - 341 of 635 )(Labour ) ---- including cost and convey...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP kw-2 bid 11059.doc

Tender Document • 1.07 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Electrical

Providing line Shifting of 11KV/D/C/LT/HT Line from Sri Chowdeshwarai Temple to Mata Gadde Road (Via Halu Halappagowda House Mata road, Kadlemakki Masidi) at Balagadi Balehonnuru Section, Koppa Tq Chikkamagalur Dist.

Public Works Department

PWD Electrical Division Office Bengaluru | Karnataka

Amount: Refer DocsCloses: 4 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published20 Aug 2024
Closed4 Sept 2024
Retendered20 Aug 2024