Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.7 LAccepted-AOC PATOLI BRAHMANA WARD NO 02 PO MUTHI TEH DISTT JAMMU J K PIN 181205 | JAMMU | JAMMU AND KASHMIR | 181205 | L-1 | Accepted-AOC Being lowest bidder | |
| 2 | L-2₹36.8 L+₹5.1 L (16.1%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹42.3 L+₹10.6 L (33.4%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹42.7 L+₹11.0 L (34.7%)Rejected-Finance GURHA BRAHMANA TEH AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹43.9 L+₹12.2 L (38.6%)Rejected-Finance H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | L-5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
WELCOME MAINTENANCE TO OFFICER S ACCN AND PERIODICAL SERVICES IN ZONE B AT DAMANA UNDER GE JAMMU
2023_MES_592501_1
GEJC-02/2023-24
Open Tender
Civil Works
Item Rate
240 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
23 Jun 2023
1 May 2023
29 May 2023
1 May 2023
27 May 2023
15 May 2023
Amount
B/R Portion: - Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and as directed. (Including all necessary scaffolding, lifting arrangement for external surfaces).
Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and as directed.
Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
Material and labour for applying two coats of cement based paint including preparation of new plastered surface complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of wall care putty as on wall complete all as specified and as directed.
Dismantling floors, hearth or wall tiling including cement mortar, bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for glazed ceramic coloured tiles 250 x 350 / 300 x 450 x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in cement mortar (1:4) complete all as specified and as directed.
Material and labour for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
Material and labour for vitrified tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in cement mortar (1:4) complete all as specified and directed.
Supply and fixing machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer–in-Charge.
Supply and fixing machine cut kota stone slab 18-20mm thick over 10 mm thick as in vertical surface over rendering in cement mortar (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer–in-Charge.
Material and labour for granite 20mm thick (pure black) (tabled, rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.
Dismantling PVC water tank / demolition of RCC water storage tanks of capacity upto 1000 litres and removing from site complete all as specified and as directed.
Supply and fixing in repair rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part - I.
Supply and fixing in repair rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe anf fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part - I.
Dismantling boarding in any description, fixed in any position with nail complete all as specified and as directed.
Supply and fixing for 4mm thick of size 605 X 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336 : 1993 fixed / laid / incuding galvanised iron frame work at ceiling with screws frame work for ceiling with specification as under mentioned:- (i) Galvanised iron section frame work (Powder coated) suitable for ceiling board, consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X 24mm flange 0.33mm thick. Wall angle shall be screwed / fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending galvanised iron main 'Tee' in both directions by means of hangers / suspenders including 4 galvanised iron wires with alignment @ 1220mm centre to centre to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm centre to centre in both directions and all suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exceeding 4 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed by Engineer-in-Charge.
Material and labour for factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.
Material and labour for factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.
Supply and fixing in repair solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet and edges will be painted to match with plain sheet, reinforced with mild steel square tube, supplying and fixing in opening as per specification complete all as specified and as directed.
Supply and fixing in repair 30 mm thick PVC plain colour factory made panel door shutter (style) consisting of frame made out of mild steel tubes for top and bottom rail, Mild steel frame shall be covered with heat moulded plain colour PVC channel and 5 mm thick X 15 mm wide PVC sheet beading used inside style and rails and decorative PVC beading of 10 x 10 mm used instead of exposed portion of PVC sheet beading as in toilet / kitchen cabinet shutters complete all as specified and as directed.
Supply and fixing 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both faces complete all as specified and directed.
Supply and fixing second class hard wood, glazed and skelton shutter 35mm thick open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Pt-I Section 8.24 (b) supplied and fitted to chowkhats complete all as specified and as directed.
Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and as directed.
Supply and fixing prelaminated particle board 18 / 19 mm thick, interior grade prelaminated one side with decorative choice lamination fixed with screws to timber frame work fixed in repair complete all as specified and as directed.
Supply and fixing pre-painted (factory painted) box type mild steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter fixed with galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including necessary galvanised iron wire staples etc on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 complete all as specified and as directed. Note: - The quoted rates shall also include: - (i) Two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. colour / shade will be approved by Engineer-in-Charge. (ii) 4 no's mild steel steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs complete. (v) Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete.
Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and as directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and directed.
Material and labour for cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in pressed steel chowkhats, bed block for holdfast and the like complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge.
Material and labour for PCC (1:2:4) type B-0 (using 12.5mm thick crushed stone aggregate) mixed with liquid waterproofing compound and laid on RCC sunken slab as base layer for receiving top layer complete all as specified and as directed by Engineer-in-Charge.
Supply only liquid water proofing compound complete all as specified and as directed.
Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.
Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.
Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair vitreous china wash hand basin white flat back end of size 550 x 400mm including brackets, cutting for and pinning in ends for brackets erecting stand complete including brass chromium plated waste coupling and PVC 32mm bore waste pipe with chain and plug and porcelain stopper complete all as specified and directed.
Supply and fixing in repair sink with drainage board made of stainless steel 1mm thick kitchen with plugs washers or waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 100mm including waste pipe etc complete all as specified and as directed.
Supply and fixing in repairs stainless steel plate rack made out of 1mm thick sheet of size 750 x 600 x 250mm of size having partition and fixed with steel fasteners or steel screws complete all as specified and as directed.
Supply and fixing in repair toilet paper holder box type complete all as specified and as directed.
Taking up or down steel tubing 15mm bore and connection, including cleaning for refixing or removal of unserviceable pipe to store complete all as specified and as directed.
Taking up or down steel tubing 20mm bore and connection, including cleaning for refixing or removal of unserviceable pipe to store complete all as specified and as directed.
Supply and fixing 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed complete to walls and ceiling or laid in floor all as specified and as directed.
Description all as per Ser Item No 47.00 here-in-before but except tubing complete all as specified and as directed.
Supply and fixing galvanised iron tubing 20 mm bore medium grade including all necessary fittings laid in floors or fixed in walls or ceilings complete all as specified and as directed.
Supply and fixing in repair hand shower (health faucet) (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed.
Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
Supply and fixing in repairs corner glass shelf minimum 200 mm radius with bracket complete all as specified and as directed.
Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15mm bore fixed in repair complete all as specified and as directed minimum weight 210 grams.
Supply and fixing in repair curtain rods, mild steel, chromium plated with fixing brackets, stops, side funnels etc complete with all fittings all as specified and as directed.
Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore fixed in repair complete all as specified and as directed minimum weight 210 grams.
Supply and fixing in repairs bib taps, cast copper alloy fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repairs chromium plated angular stop cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repairs 15 mm dia bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repairs 15 mm dia bore brass chromium plated wall mixer with L bend suitable for connecting to shower pipe for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repairs 15 mm dia bore brass chromium plated wash hand basin / sink mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repair waste coupling / fittings, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified and as directed.
Supply and fixing in repair looking mirror of size 600mm x 450mm with PVC moulded frame and hard board back white colour complete all as specified and as directed.
Supply and fixing in repair PVC connection 15mm bore and 450 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.
Cleaning of water storage tank completely by removing all scale dirt / dust of any description including disconnecting tank and refixing in position after cleaning complete all as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity exceeding 250 litres and not exceeding 500 litres including dismantling and refixing if required complete all as specified and as directed.
Cleaning of water storage tank completely by removing all scale dirt / dust of any description including disconnecting tank and refixing in position after cleaning complete all as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity 1000 litres including dismantling and refixing if required complete all as specified and as directed.
Supply and fixing in repair PVC flushing cistern 10 litre capacity make should be engraved on the body including flushing pipe chromium plated 90 cm long, pair of bracket etc complete all as specified and as directed.
Supply and fixing in repairs tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass chromium plated complete all as specified and as directed.
Supply and fixing in repairs brass chromium plated shower rose with arm not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and as directed.
Supply and fixing in repair 125 mm dia steel grating fixed in position complete all as specified and as directed.
Supply and fixing in repair 125 mm dia steel grating with hole fixed in position complete all as specified and as directed.
Supply and fixing in repair Aluminium door stopper 150mm for doors complete all as specified and as directed.
Supply and fixing in repairs Helical door spring of size 300 mm including welding to steel chowkhats complete all as specified and as directed at site.
Supply and fixing Aluminium (extruded section) body door closer hydraulically regulated designation No 2, universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 and 60kg and fixed in repairs complete all as specified and as directed.
Supply and fixing in repair galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.
Supply and fixing in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Hacking out old broken glass of any thickness, size, quality or description from the wooden frames glazing with putty or fixed with wooden beads complete all as specified and as directed.
Supply and fixing figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane of thickness 3mm complete all as specified and as directed.
Supply and fixing 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
Supply and fixing in repairs aluminium anodized, barrel tower bolt of extruded section, 150mm long complete all as specified and as directed.
Supply and fixing in repairs aluminium anodized, barrel tower bolt of extruded section, 200mm long complete all as specified and as directed.
Supply and fixing in repairs aluminium handle, cast type, anodized, 150mm size complete all as specified and as directed.
Supply and fixing in repair butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, 75mm size complete all as specified and as directed.
Supply and fixing hasp and staple 150mm long safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws fixed in repair complete all as specified and as directed.
Material and labour cement concrete 50mm thick (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in flooring finished even and rough all as specified and directed.
Material and labour sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
Material and labour machine pressed precast concrete interlocking paver block any shape and size confirming to IS : 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and as directed.
Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.
Material and labour for chequered cement concrete coloured tiles 30cm x 30cm x 25 mm thick, polymer moulded set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including screed bed and bedding layer of mortar 20mm thick in cement plaster (1:6) for laying floor finishes as per design / pattern approved by Engineer-in-Charge all as specified and as directed.
Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of white wash on walls complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of oil bound distemper including wall putty on wall complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of oil bound distemper as on ceiling complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces by scrapping down old treatment, smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying texture painting over two coats of wall putty as on wall complete all as specified and as directed.
Material and labour for complete removal of existing treatment of external walls including cornices, pillasters by brooming down or steel wire smoke, root, mould, moss and efflorscent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc, applying two coats of weather proof paint exterior grade over one coat of primer on walls, making good the depression etc with wall putty surface even and smooth including all scaffolding arrangement upto four storeyed building complete all as specified and directed.
Material and labour for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old wooden surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and directed.
Material and labour for preparation of surfaces of any description etc of overhead water storage tank of capacity not exceeding 50000 gallans and applying two coats of cement based paint in concrete surface etc and two coats of synethetic enamel paint in steel surfaces (railing etc) on over head water tank complete in any pattern, shape, desription etc as directed including necessary arrangements of scaffolding, safety precaution upto 18 metre height complete all as specified and directed. Note: - Tenderer should visit the site of over head tank before quoting the rates.
Material and labour for cutting and derooting of trees, shrubs on wall, ceiling, roof, adjacent to pipes, at corner etc upto three storey and making good with PCC (1:2:4) not exceeding 0.5 Sqm area including finishing the surface to match the existing shade necessary scaffloding upto three storey building complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden / iron, round block etc and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
Material and labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid / steel conduit and into existing CI / pressed steel sunken / terminal boxes including 3.00mm thick hylum brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.
Description all per Ser item No 105.00 here-in-before but for one 5 pin socket outlet 5 amps on the same board complete all as specified and as directed.
Description all per Ser item No 105.00 here-in-before but for one 5 pin socket outlet, 5 amps, independent complete all as specified and as directed.
Description all per Ser item No 105.00 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed.
Description all per Ser item No 105.00 here-in-before but drawn through a new surface conduit PVC rigid non metallic conduit 20 mm dia for socket outlet 5 amp independent board complete all as specified and as directed.
Description all per Ser item No 105.00 here-in-before but drawn through a new surface conduit PVC rigid non metallic conduit 20 mm dia for socket outlet 15 amp independent board complete all as specified and as directed.
Material and labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid / 1.8mm wall thickness ISI marked including pressed steel sunken / terminal boxes with existing colour terminated boxes of modular metal flush boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following: - Note: - (a) Suitable module white cover sheets with frame as specified to be provided in replacement to mild steel / Galvanised sunken boxes and measured and paid separately as per relevant item. (b) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.
Description all as per Ser Item No 111.00 here-in-before but for 5 Amp socket outlet on same board complete all as specified and as directed.
Description all as per Ser Item No 111.00 here-in-before but for socket outlet 5 Amps independent board complete all as specified and as directed by Engineer-in-Charge.
Description all as per Ser Item No 111.00 here-in-before but for one 6 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and as directed.
Supply and fixing in replacement modular switch 1 way 6 A, 1 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular switch 1 way, 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement socket 6A / 16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement fan step regulator, 120W, 1 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular metal flush box 1/2 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular metal flush box 3 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular metal flush box 4 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular metal flush box 6 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular metal flush box 8 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular white cover plate with frame 1 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular white cover plate with frame 2 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular white cover plate with frame 3 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular white cover plate with frame 4 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular white cover plate with frame 6 module, 240 volts ISI marked complete all as specified and directed.
Supply and fixing in replacement modular white cover plate with frame 8 module, 240 volts ISI marked complete all as specified and directed.
Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.
Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.
Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 6 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.
Supply and fixing in replacement of 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.
Supply and fixing in replacement of 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.
Supply and fixing in repair single pole neutral 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.
Supply and fixing in repair single pole neutral 40 to 63 Amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.
Supply and fixing in replacement for switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed.
Supply and fixing in replacement of socket outlet 2 in 1, 3 pin, 5 A complete all as specified and as directed.
Supply and fixing in replacement of switch socket outlet combined 5 pin, 5 amp flush type, 240 volts complete all as specified and as directed.
Supply and fixing in replacement of switch socket outlet combined 2 in 1, 3 pin, 5 amp and 15 amp flush type, 240 volts complete all as specified and as directed.
Supply and fixing in repair for bell push, flush type single pole, 5 Amp, 240 volts complete all as specified and as directed.
Supply and fixing in repair ceiling rose 3 terminal surface type complete all as specified and as directed.
Material and labour in replacement for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
Material and labour in replacement of self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.
Supply and fixing in replacement of LED lights fitting 1 x 20 W, 220 V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.
Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fixing in replacement wall mounted decorative type luminaries IP-65 with diffuser 10 watt, 230 Volts LED type complete with 10 watt LED bulb complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing in replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and as directed.
Supply and fixing in replacement calling bell ding dong / buzzer AC 230 Volts, single pole complete all as specified and as directed.
Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length. Note: - Wiring shall be done in proper colour coding.
Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length. Note: - Wiring shall be done in proper colour coding.
Material and labour in replacement for wiring for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1 run 2.5 Sqmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.
Material and labour in replacement for wiring for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1 run 1.5 Sqmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.
Material and labour in replacement for earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.
Supply and fixing in replacement of plug top 15 Amps complete all as specified and directed.
Supply and fixing in replacement of Vertical distribution board (TP & N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bar all as specified and directed. Including taking down old unserviceable distribution board / MCB any type. Note: - (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCB's shall be measured and paid separately. (iii) TPN distribution board and MCCB should be of same make.
Material and labour in repair for decorative post top lantern light for 360° indirect light with IP-65 protection, resistant to impact and corrosion. Glare-free and better uniformity model including fixing of the light on the existing pipe arrangement and necessary wiring to light from nearest junction box complete all as specified and as directed.
Taking down and strip opening to geyser of any make and capacity 25 / 35 / 50 litres including disconnection of all water pipe connection and taking out water inlet / outlet assembly, removing glass wool, the inner tank, descaling the assembly and tank, detecting the leakage, welding / bracing the defected part, repacking the glass wool and refixing the same after making it functional including replacement of worn out nuts, bolts, washer etc complete all as specified and as directed. Note: - Cost of material for providing new items shall be measured under relevant items of Sch 'A'.
Supply and fixing in repair water inlet and outlet geyser assembly of existing make as required at site with rubber gasket suitable for geyser of 25 / 35 litres capacity electric driven water storage heater with provision of housing for thermostat assembly, heating element, fixing arrangement nuts, bolts and washers etc complete all as specified and as directed.
Supply and fixing in repair water inlet and outlet assembly of existing make as required at site with rubber gasket suitable for geyser of 50 litres capacity electric driven water storage heater with provision of housing for thermostat assembly, heating element, fixing arrangement nuts, bolts and washers etc complete all as specified and as directed.
Supply and fixing in repair thermostat, switch electric water heater storage type of capacity 25 / 50 litre, 230 volts of existing make of geyser complete all as specified and as directed.
Supply and fixing in repair heating element with triangular base / round base, single phase, 230 Volt, cap 2 KW of existing make complete all as specified and as directed.
Supply and fixing in repair heating element with triangular / round base, single phase, 230 Volt, cap 1.5 KW of existing make complete all as specified and as directed.
Supply and fixing in repair heavy duty PVC connection (For Hot water) nylon threaded 450mm large (18'') 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and as directed.
Description all as per Ser Item No 166.00 here-in-before but for cold water complete all as specified and as directed.
Supply and fixing in repair indicator lamps round / rectangular type 230 Volt AC suitable for geyser of any capacity including providing electric connections complete all as specified and as directed.
Supply and fixing in repair water storage inner tank of stainless steel heavy duty conforming to ISI 25 / 35 litres capacity geyser, with provision for fixing 15mm dia galvanized air release valve complete all as specified and as directed.
Supply and fixing in repair water storage inner tank of stainless steel heavy duty conforming to ISI 50 litres capacity geyser, with provision for fixing 15mm dia galvanized air release valve complete all as specified and as directed.
M/S BHAGMAL AND SONS
M/S ELECTROMATICS
bushan kumar
STAR CONSTRUCTIONS
M/S Shesh Paul Gupta
Bidder Name
M/S Shesh Paul Gupta
STAR CONSTRUCTIONS
M/S VERMA ENTERPRISES
M/S ELECTROMATICS
bushan kumar
M/S BHAGMAL AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .