Re-Construction of Arulmigu Subramaniyaswamy Thirukoil, Ammaiagaram, Chinnaselam Tk, Kallakurichi Dt

Amount

Dismantling the Brick work in lime mortar away from the site etc.,

Removal of the Pavukkal away from the site etc.,

Remvoal of the Pan tile away from the site etc.

EarthWorth excavation for foundation in all soils except hard requiring blasting to a full depth with initial lead of 10m and lift of 2m etc., complete(SS 20B)

Supplying and filling with foundation in basement with filling MSand in layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling sand.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Filling with foundation and basement with Garvel in thick layers well rammed & consolidated, including watering, complying with std.specification etc complete.

Plain cement concrete 1:5:10 (One cement, five sand and ten hard broken granite stone jelly) using 40mm HBG metel as foundation concrete including dewatering wherever necessary and laid in layers of not more than 15cm. thick complying with std specification.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

For foundation and basement

RCC columns in superstructure GF

Centering for soffits of reinforced cement concrete slabs, plain surface including strutting 3 meter height using MS plates of size 90cmx60cm and 10 gauge stiffen and with welded mild steel angles of size 25x25x3mm laid over silver oak (Country wood)

a)For Grade beam

b)For plain surfaces

c)For circular column

c)for curved surfaces

Supplying , Fabrication and placing in position of M.S. or RTS rods reforcement grill in position for all RCC works including cost of steel rods and binding wire etc., complete

Brick work in cement mortar 1 : 5 (one cement and five sand) using country bricks of size 83/4"X41/4"X23/4 including cost and conveyance of materials and labour charges and all other incidental charges etc complete complying with std specification..

For foundation and basement

For Super structure GF

Supply of cut stone , cut stone pillar and cut stone beam etc complete the std specification.

A)For wall Data

B)For Pavukkal & Uthiram Data

Supply & Fixing of the cut stone flooring of size 600X600 not less than 100mm thick with cement mortor 1:3 and pointing machine cutting edges and top surface dressed as sama mortor including all labour charges etc complete the std specification.

A)Inner

B)Outter

Providing Scaffolding for vimanam raja gopuram with Casurnia post non flammable materials wherever necessary for main form work and by providing non flammable materials as covering the areas & plat form for inspection etc all complete. a)for Ht 25'-0"

Ornamental Brick work in Cement Mortor 1:4 mix using country bricks 83/4"x43/8"x23/4" all vari vargams, moulds, sthambas,mukapatram,koodu,nasi,and all ornamental brick workcomplete panchavarnam agaraies, karnakoodus etc forming core walls rajagopuram/vimanams complete in cluding cement al labour chagers(Vimanam/Gopuram upto a height of 15')

Providing vargapoochu over the core walls of vimanams/Gopurams,with Cement Mortor 1:4 complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with Cement Mortor 1:4and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram.(Vimanam/Gopuram upto a height of 15')

Painting with multicolour (panchavarnam) good emulsion paints complete for the vimanams/gopurams,including cost and conveyance of all materials , labours charges including artist painter, working in heights, lifting of materials,cost of brushes etc, complete which including all extra for foldings.(Vimanam/Gopuram upto a height of 15')

Plastering with cement mortar 1: 5 (one cement and five sand) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing scaffolding etc ., complete in all respects and complying with relevant std specifications.

Special Ceiling Plastering with cement mortar 1: 3 (one cement and three sand) 10mm thick finished with neat cement including providing band cornice, ceiling cornice, curing scaffolding etc ., complete in all respects and complying with relevant std specifications.

Painting two coats over the new plastered surface with water based emulsion paint including the labour and materials charges etc complete complying the std speicification.

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in LM 1:1.5 finishing the same with LM 1:1.5 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing L.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) Ht of sudhai 2'6" to 3'6"

Labour Charges for dressing and Fixing the cut stone of various stages combination mortor 1:1:3 including pointing the same mortor etc complete the std specification.

For Chitiravanam

For Kandam

For Kabothaga patiyal

For Jagathi

For Kumutham

For Kandapam pattikai

For Aswapatham

For Sthampam

For Kudam

For Veerakandapothiyal

For uthirakkal

For Kapothagam

For Viyalam

For Pavukkal

For Vasakkal

For Nasaithalai

For Inne vari

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc complete

Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing teak wood temple type including all amterials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.

Painting two coats over new wood works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete(with one coat primer)

Supplying and fixing MS grill gate including the cost and conveyance of all materials and fixing in position including priming coat etc complete.

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete(with zinc chromide primer)

Supply and fixing run of 2X6 Sqmm(84/0.3) PVC inslutated SC unsheathed Cu.conductor of 1100 V on 7/20GI bearer wire for service connection mains

Supply and fixing of 15A aerial fuse unit (500A) on suitable 100 x 100mm TW concealed box with hylem sheet on the tapping pole with necessary clamps(

Wiring with 2X1.5 sqmm(22/0.3) PVC inslutated sc unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A ft switch with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (5 points per coil)(For electronic regulator)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED Tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with legrand/havels make.

Supply and run of 2 of 6 sq.mm. (84/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains

sub total

Er Constructions (BID ID -1133918)