Tender ID

Tamil Nadu

Active

Works

Civil Works

Repairs to Anganwadi Building at Melamanakudi Panchayat (Minor Repair)

Rural Development and Panchayat Raj Department

Melbhuvanagiri | Cuddalore, Tamil Nadu

Amount: ₹3.6 LCloses: 27 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Nov 2026
Pre-Bid Meeting16 Nov 2026
Closes27 Nov 2026
Bid Opening27 Nov 2026

Tender Value

₹3.6 L

EMD Value

₹3,610

Closing Date

27 Nov 2026, 3:00 pm

Tender Inviting Organisation

Name

Block Development Officer (BP), Melbhuvanagiri

Address

Block Development Officer (BP), Melbhuvanagiri

Work Description

Repairs to Anganwadi Building at Melamanakudi Panchayat (Minor Repair)

Tender Information

Tender ID

2026_RDTN_725241_11

Reference Number

A3/1050/2026 GF BP Anganwadi Repair

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

90 days

Location

Melbhuvanagiri

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As Per Tender

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredIT Statement and GST including Pan Card (.pdf)

RequiredContractor Registation and Renewal (.pdf)

RequiredTechnical Staff (.pdf)

RequiredExperience Certificate (.pdf)

RequiredMachinery Own or Leased (.pdf)

RequiredTechnical bit (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹3,610

EMD Fee Exemption Allowed

Yes

Pre-Bid Meeting

Meeting Place

Panchayat Union, Melbhuvanagiri

Important Dates

Last Activity

12 Nov 2026

Published

12 Nov 2026

Bid Opening

27 Nov 2026

Download Starts

12 Nov 2026

Download Ends

27 Nov 2026

Submission Starts

12 Nov 2026

Pre-Bid Meeting

16 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (48 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Repairs to Anganwadi Building at Melamanakudi Panchayat (Minor Repair)	-	-	-	-
2	Dismantling of old Ceiling platering and carefully removed from the site including all labour charges etc.,	46.34	Sqm	-	-
3	Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete	14.22	Sqm	-	-
4	Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.	32.12	Sqm	-	-
5	Dismantling of old wall plastering and carefully removed from the site including all labour charges etc.,	30.04	Sqm	-	-
6	Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete	30.04	Sqm	-	-
7	Dismantling of Vertified tiles floor finish and including all labour Charges etc complete	24	Sqm	-	-
8	Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed,	2.4	Cum	-	-
9	Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)	26	Sqm	-	-
10	Dismantling of Roof top Pressed tiles and including all labour Charges etc complete	40.46	Sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.61 MB

Work Item Documents

BOQ_870700.xls

BOQ • 0.34 MB

technicalbitmelamanakudi.pdf

Tender Documents • 0.22 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Repairs to Anganwadi Building at Melamanakudi Panchayat (Minor Repair)

Dismantling of old Ceiling platering and carefully removed from the site including all labour charges etc.,

46.34

Sqm

Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete

14.22

Sqm

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.

32.12

Sqm

Dismantling of old wall plastering and carefully removed from the site including all labour charges etc.,

30.04

Sqm

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete

30.04

Sqm

Dismantling of Vertified tiles floor finish and including all labour Charges etc complete

Sqm

Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed,

2.4

Cum

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Sqm

Dismantling of Roof top Pressed tiles and including all labour Charges etc complete

40.46

Sqm