REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION, SUMMER COOLING APPLIANCES, DESERT COOLERS, LT PANELS AND ALLIED WORK SERVICES AT BHAKROTA UNDER GE (S) JAIPUR AT MIL STN JAIPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil etc complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

M&L for sand filling under floor or in foundations including gently punned as in cushioning to cable complete all as specified and directed. Note:- Punned thickness of sand shall be measured and paid.

Removal of excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

M&L for brick protection cover to the under ground cable (with old size sub class 'B' bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm all as specified and directed.

Surface dressing / cleaning of various 11KV sub-stations/pump house free from vegetation of any type including trimming of tree branches, bushes, creepers, etc.complete all as specified. Note:- The frequency of surface dressing shall not be less than 2 months.

S&F in repair galvanised tube of 50 mm bore, light grade with all fitting complete all as specified and directed.

Suppy and laying or passing through pipe in repair, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core nominal cross section in service connections complete all as specified and directed.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150 sq. mm 3.5 core complete all as specified and directed. Note-Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 sq. mm 3.5 core complete all as specified and directed. Note-Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

S&F in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Note : The quoted rate include the cost of assembling of the complete fitting and its testing before and after mounting or erection etc. for proper functioning.

S&F in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Note : The quoted rate include the cost of assembling of the complete fitting and its testing before and after mounting or erection etc. for proper functioning.

M&L for disconnecting and taking down unserviceable street light / flood light fittings and accessories of any size / type / make from high mast pole / electric pole / building, safely and re-fixing after minor repair like LED driver, cleaning, tightening of loose component etc and servicing in serviceable condition including provision of cable for connection complete all as specified and directed. Note : (i) The tools and plants required for repair / maintenance such as ladder, crane vehicle, menpower etc. shall be inclusive with the quoted rate. (ii) Spare parts like LED drivers etc. are measure and paid seperately under respective items.

M&L for LED driver with surge protection as per existing make or compitable for existing 45 to 60 watt LED light complete all as specified and directed.

M&L for LED driver with surge protection as per existing make or compitable for existing 60 to 80 watt LED light complete all as specified and directed.

M&L for PVC casing capping of size not less than 32x16 mm, ISI marked, ivory colour along with all fittings / fixing accessories, complete all as specified and directed.

S&F swing wall fan of 400mm sweep, 45 to 60W, White Colour with 70 Cubic Metres per Minute (CMM) air delivery rate complete all as specified and directed. Make : Havells Cat Part No. - FHWSWSTIVR12 / Crompton Cat Part No. - WMHFWAVPL16KDW / Orient Electric Cat Part No. - 2121666011010 or equivalent make as approved by GE.

M&L for PVC surface mounted modular gang box for mounting switches / sockets / fan regulator etc.with cover plate and switch,socket of same make and all other fixing accessories of size 1/2 module complete all as specified and directed.

M&L for PVC surface mounted modular gang box for mounting switches / sockets / fan regulator etc.with cover plate and switch,socket of same make and all other fixing accessories of size 3 module complete all as specified and directed.

M&L for PVC surface mounted modular gang box for mounting switches / sockets / fan regulator etc.with cover plate and switch,socket of same make and all other fixing accessories of size 4 module complete all as specified and directed.

M&L for PVC surface mounted modular gang box for mounting switches / sockets / fan regulator etc.with cover plate and switch,socket of same make and all other fixing accessories of size 6 module complete all as specified and directed.

M&L for PVC surface mounted modular gang box for mounting switches / sockets / fan regulator etc.with cover plate and switch,socket of same make and all other fixing accessories of size 8 module complete all as specified and directed.

S&F in repair capacitor from 2.15 to 3.15 MFD capacity for 300/450 mm sweep size ceiling fan, complete all as specified and directed.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 10 sqmm to 35 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm to 70 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 95 sqmm to 150 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm to 300 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

S&F in repair Bus bar electrolytic grade aluminium of 25×6 mm, mounted on insulators including drilling holes, disconnection & reconnection of cables from existing panel complete all as specified and directed.

S&F in repair Bus bar electrolytic grade copper of 25×4 mm, mounted on insulators including drilling holes, disconnection & reconnection of cables from existing panel complete all as specified and directed.

S&F in repair LED indicating lamp (set of three lamps, RYB), 240 volts AC including necessary wiring complete all as specified and directed.

M&L for cutting / removing damaged hinge (set of two) of any size and welding / fabricating new hinges with best quality in the existing panel including making good of existing surface complete all as specified and directed.

M&L for finding electrical fault in underground cable using fault locating machine as per site requirement for LT cables of any type/size complete all as specified and directed.

M&L for painting of LT feeder panel with two coats of synthetic enamel paint over a coat of primer and cleaning dust outside / Inside before applying paint. Note : (i) Second coat should be applied after a gap of 24 hours. (ii) The colour of paint will be decided by Engineer-in-Charge.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 10 sqmm to 35 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm to 70 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 95 sqmm to 150 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm to 300 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for preparation of old painted surface of street tubular poles of 09 metre height including cross arms, cable protection pipe with one coat of aluminium paint to a height from 1.5 m above ground level to top of pole and making alternate strips / layers (30 cm wide) with synthetic enamel paint upto the 1.5 meter height from ground level of colour as decided by Engineer-in-Charge complete all as specified and directed.

S&F in repair timer switch to control street light automatic operation including outdoor type sheet metal enclosure with IP-65 protection contactor, protection MCBs and all connected accessories complete all as specified and directed.

S&F in repair for louver for PVC exhaust fan of 200/250mm sweep size complete all as specified and directed.

S&F in repair for desert cooler iron frame clamp with nut bolt, washer for Main Motor of Desert Cooler complete all as specified and directed.

S&F in repair for refilling of R-410a / R-32 gas suitable for AC of any capacity, ISI marked complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box / modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuity conductor FRLS cable 1100 V grade as continuous earth wire for one light / fan / bell point controlled by one, one way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall and drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS sunken box modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 pin socket outlet 5 Amps on the same board with other switches, complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall and drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 pin 5 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box / modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sqmm (Green), in PVC casing & caping, not less than 25mm x 15mm, ISI marked ivory colour with all fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuty conductor FRLS cable 1100 V grade as continuous earth wire for one light point controlled by two, 2-way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

S&F switch piano, flush type, 6 amps single pole, one way, complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 16 Amp complete all as specified and directed.

S&F socket outlet 2 in 1, flush type, 3 pin, 6 and 16 amp complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F fan step regulator, 120W - 2 module complete all as specified and directed.

M&L in repair for sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed FRLS copper cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit / casing capping not less than 20mm and conduit accessories fixed on surface of wall / celing etc including provision of 1 Run of 6 Sqmm PVC insulated unsheathed FRLS cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note : 02 Run of 06 Sqmm copper wire and 01 Run of 06 Sqmm copper earth wire along with PVC conduct shall be measured as one unit.

M&L in repair for sub main wiring complete with 4 Runs of 6 Sqmm single core PVC insulated unsheathed FRLS copper cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit / casing capping not less than 25mm and conduit accessories fixed on surface/wall celing etc including provision of 1 Run of 6 Sqmm PVC insulated unsheathed FRLS cable with multi-stranded copper conductor as earth continuity complete all as specified and directed. Note : 04 Run of 06 Sqmm copper wire copper wire and 01 Run of 06 Sqmm copper earth wire along with PVC conduct shall be measured as one unit.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sq. mm 3.5 core complete all as specified and directed. Note :- Excavation, earth work, sand, brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core complete all as specified and directed. Note : Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core complete all as specified and directed. Note : Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core complete all as specified and directed. Note - Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm 3.5 core complete all as specified and directed. Note-Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

S&F in repair running capacitor of capacity 45 to 50 MFD, 440 volts, 50 Hz complete all as specified and directed.

S&F in repairs starting capacitor of capacity 60 to 80 MFD, 230 V, 50 Hz complete all as specified and directed.

S&F in repairs starting capacitor of capacity 80 to 120 MFD, 230 volts, 50 Hz complete all as specified and directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and 06 to 32 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed.

S&F in repair for plug top 3 pin, 06 Amp, ISI marked complete all as directed.

S&F in repair for plug top 3 pin, 15 Amp, ISI marked complete all as directed.

S&F in repair sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB of capacity 20 Amps complete all as directed.

M&L in repair for flexible PVC insulated with multistranded copper conductor of 1.5 Sqmm 03 Core size complete all as specified and directed.

M&L in repair for flexible PVC insulated with multistranded copper conductor cable of 2.5 Sqmm 03 Core size complete all as specified and directed.

Taking down and dismantling ceiling fan of any size including accessories of any type or make, safely and re-fixing after oiling, greasing and servicing in serviceable condition including provision of cable from ceiling rose or connector to fan including painting of fan by one coat of synthetic enamel paint of in white / off white colour by spraying including filling cavities with filler, after cleaning all dust etc. including writing Fan No. on each fan complete all as specified and directed.

S&F in repair for ball-bearings / bush for ceiling fan of 1200/1400mm sweep size, complete all as specified and directed.

M&L for re-winding the burnt / short circuited winding for ceiling fan of 1200 / 1400 mm sweep size with same guage, super enameled, copper wire to maintain speed at load complete all as specified and directed.

S&F in repair for down rod of 15mm dia and 45/60mm long for ceiling fan of 1200/1400mm sweep size, complete all as specified and directed.

S&F exhaust fan, steel body AC single phase, 230V of size 450 mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F in repair for exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep of size 200 / 250mm complete all as specified and directed.

Taking down and dismantling exhaust fan of any size including accessories of any type or make, safely and re-fixing after throughly cleaning the bearing / bush, shaft, stator, rotor etc. & oiling, greasing and servicing in serviceable condition including provision of cable from ceiling rose or connector to fan including painting of fan by one coat of synthetic enamel paint of in white / off white colour by spraying including filling cavities with filler, after cleaning all dust etc. including writing Fan No. on each fan complete all as specified and directed.

S&F for re-winding the burnt / short circuited winding for exhaust fan of 300 / 450 mm sweep size with same guage, super enameled, copper wire to maintain speed at load complete all as specified and directed.

S&F in repair for iron blade for exhaust fan of 450mm sweep size, complete all as specified and directed.

S&F in repair for iron blade for exhaust fan of 300mm sweep size, complete all as specified and directed.

S&F in repair for louver for metal exhaust fan of 300 / 450mm sweep size complete all as specified and directed.

S&F in repair for Nut & Bolts of appropiate size for exhaust fan, 300/450mm sweep size complete all as specified and directed.

S&F in repair for ball-bearings / bush for exhaust fan of 300/450mm sweep size, complete all as specified and directed.

S&F in repair electronic dimmers, 450W, 250V flush type for desert cooler complete all as specified and directed.

Taking down desert cooler for repair / Servicing of 3000 / 4000 CFM air flow capacity, single phase 230 Volts, of any make, after disconnecting electric / water connection, drain out water and carry out minor repair work such as repairing of internal worn out wires, and for replacement of unserviceable parts such as Motor, Fan blade, Lead wire servicing of sumbersible pump,switch, regulator and legs and including preparing the steel surfaces and applying two coats of synthetic enamel paint, refixing & testing complete all as specified and directed. Note : Spare part are measure and paid seperately under respective items.

M&L for re-winding the burnt / short circuited winding of main electric motor of desert cooler of 3000/4000 Cubic Feet per Minute (CFM) capacity with same guage, super enameled, copper wire to maintain the same speed CFM, complete all as specified and directed.

S&F in repair for main electric motor of desert cooler for desert cooler of 3000/4000 Cubic Feet per Minute (CFM) capacity , complete all as specified and directed.

M&L for Grass Cooling Pads (set of three) of desert cooler for desert cooler of 66cm x 66cm x 1m size complete all as specified and directed.

S&F in repair for flexible PVC pipe for desert cooler complete all as specified and directed.

S&F in repair cooler front grill for desert cooler of any size complete all as specified and directed.

S&F in repair cooler submersible pump for desert cooler complete all as specified and directed.

S&F in repair cooler iron body fan blade with nut bolt, washer for (3000/4000) CFM Desert Cooler complete all as specified and directed.

S&F in repair Side Panel (set of three) made of MS sheet of 2mm thick appropiate size for desert cooler of 3000 / 4000 CFM complete all as specified and directed.

M&L in repair for taking out unserviceable sealed unit (rotary compressor) 1.5 ton capacity, single phase, 230 volt of any make of split / window type AC including necessary modification of the foundation as required to suit the compressor, vacuumisation, pressure, leakage rectification including gas charging R-22 and testing complete all as specified and directed.

M&L in repair for taking out unserviceable sealed unit (rotary compressor) 2.0 ton capacity, single phase, 230 volt of any make of split / window type AC including necessary modification of the foundation as required to suit the compressor, vacuumisation, pressure, leakage rectification including gas charging R-22 and testing complete all as specified and directed.

S&F in repairs Blower Motor (outdoor unit), single phase 230 Volts, 1500 RPM, suitable for 1.5 / 2.0 TR Split type AC complete all as specified and directed.

S&F in repair plastic filter as per existing makes for Window / Split type AC of 1.5 / 2.0 ton capacity complete all as specified and directed.

M&L in repair for PCB control card suitable for 1.5 / 2.0 TR capacity split / window type AC, single phase complete all as specified and directed.

M&L for servicing of split type AC of 1.5/2.0 tone capacity by taking out the same from existing location, cleaning of condenser, cooling coil, and other components with cooling coil rinse solution and clean water, greasing of fan, motor, blower etc without damage any part and re-install at the same location complete all as specified and directed. Note : Spare part are measure and paid seperately under respective items.

Disconnecting and taking down Geyser and accessories of any type or make, safely and re-fixing after minor repair like cleaning, tightening of loose component etc and servicing in serviceable condition including provision of cable from ceiling rose or connector to geyser including painting of geyser by two coat of synthetic enamel paint of in white / off white colour by spraying including filling cavities with filler, after cleaning all dust etc. including writing Geyser No. on each geyser complete all as specified and directed. Note : Spare part are measure and paid seperately under respective items.

S&F in repair base assembly (6/9 holes) complete with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element inclusive of clamps for holding the element with nut and bolts, washer for Geyser of capacity 25/50 litre complete all as specified and directed.

S&F in repair safety / high pressure release valve for geyser of 25/50 Litres capacity, ISI marked complete all as specified and directed.

S&F in repair PVC heavy duty hot / cold type, connecting pipe, nylon braided with brass adopters 450 / 600mm long (ISI marked) and fixing in position suitable for geyser of 25/50 litre capacity complete all as specified and directed.

S&F for geyser indicator lamp square / round type (ISI marked) complete all as specified and directed.

S&F in repair thermal cut-off with heating sensor rod of appropiate size for geyser of 25L / 50L capacity complete all as specified and directed.

S&F in repair for thermostatic switch with knob suitable for Fridge / Refrigerator of 180 to 320 litre capacity, ISI marked complete all as specified and directed.

S&F in repair fan motor of existing make, suitable for Fridge / Refrigerator of 180 to 320 litre capacity complete all as specified and directed.

S&F in repair for overload protection relay, suitable for Fridge / Refrigerator of 180 to 320 litre capacity, ISI marked complete all as specified and directed.

M&L in repair for unserviceable sealed unit compressor for Fridge / Refrigerator of 180 to 315 litre capacity, single phase, 230 volt, ISI marked including vacuumisation, pressure, leakage rectification including gas charging (R134a / R410a or as directed by Engg-in-Char) and testing complete all as specified and directed.

S&F in repair for evaporator coil / cooling coil assembly, suitable for Fridge / Refrigerator of 180 to 320 litre capacity, ISI marked complete all as specified and directed.

S&F in repair for outer front door (magnetic type) with gasket as per existing make, suitable for Fridge / Refrigerator of 180 to 320 litre capacity, ISI marked complete all as specified and directed.

Taking down water cooler for repair / Servicing of 40/80 litre capacity, single phase 230 V, of any make, after disconnecting electric / water connection, drain out water and carry out minor repair work such as repairing of internal worn out wires, welding of MS sheet and for replacement of unserviceable parts such as compressor, motor, fan blade, lead wire, legs and testing complete all as specified and directed. Note : Compressor / Motor / Fan blade are measure and paid seperately under respective items.

M&L in repair for unserviceable sealed unit compressor for water cooler 40 / 80 litre capacity, single phase, 230 volt, ISI marked including vacuumization, leakage rectification including gas charging (R134a / R410a or as directed by Engg-in-Charge) and testing complete all as specified and directed.

S&F in repair fan motor of 0.1 HP capacity, single phase, 230 volts, 50 Hz suitable for water cooler of 40 / 80 litre capacity complete all as specified and directed.

S&F in repair for thermostat suitable for water cooler of 40 / 80 litre capacity, ISI marked complete all as specified and directed.

S&F in repair for overload protection relay, suitable for Water Cooler of 40 / 80 litre capacity, ISI marked complete all as specified and directed.

S&F in repair for fan motor blade for water cooler of 40 /80 litre capacity , complete all as specified and directed.

S&F in repair MCCB 4 pole, 160 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 200 Amps, 36 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 250 Amps, 36 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 125 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 100 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 63 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

M&L in repair for earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 15mm bore for protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:3:6) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm bore GI Pipe medium grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed. Note :- 1. PCC Chammer shall be constructed atleast 2.5 metre away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner. 2. GI wire and protection pipe upto 7.5 meter from the earth plate electrode is deemed to be included in quoted rate. 3. Excavation for earthing to be done manually and Earth resistance below 3 Ohm should be obtained after measurement for every pit.

M&L in repair for earthing with galvanised iron earth plate electrode 600mm x 600 mm & 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below Ground level, connected to GI strip 25x4 mm (up to 7.5 metre) by means of GI nuts, bolts & washers , earth strip protected with & including 40 mm dia light grade GI pipe (up to 7.5 metre) all as shown in electrical plate No 3 of MES Schedule Part I, with & including PCC 1:3:6 type C1 for pit with cover of 50 mm thick RCC 1:1.5:3 type A1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm, watering arrangements with 20 mm GI medium grade pipe , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete all as specified and directed. Note :- 1. The insulation procedure shall be followed as per instruction of the earth electrode manufacturer. 2. GI pipe of suitable size for protection against mechanical damage of main earth strip from earth electrode to test point up to 7.5 metre to be provided. The cost for the same shall be deemed to be included in the quoted rate. GI strip & GI protection pipe beyond 7.5 metre shall be measured & paid separately. 3. If desired earth resistance is not obtained during testing ,the earthing shall be re-done with out any extra cost.

M&L in repair for earthing with galvanised iron earth plate electrode 600mm x 600 mm & 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below Ground level, connected to GI strip 32x6 mm (up to 7.5 metre) by means of GI nuts, bolts & washers ,earth strip protected with & including 40 mm dia light grade GI pipe (up to 7.5 metre) all as shown in electrical plate No 3 of MES Schedule Part I, with & including PCC 1:3:6 type C1 for pit with cover of 50 mm thick RCC 1:1.5:3 type A1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm, watering arrangements with 20 mm GI medium grade pipe , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete all as specified and directed. Note :- 1. The insulation procedure shall be followed as per instruction of the earth electrode manufacturer. 2. GI pipe of suitable size for protection against mechanical damage of main earth strip from earth electrode to test point up to 7.5 metre to be provided. The cost for the same shall be deemed to be included in the qouted rate. GI strip & GI protection pipe beyond 7.5 metre shall be measured & paid separately. 3. If desired earth resistance is not obtained during testing ,the earthing shall be redone with out any extra cost.

S&F in repair stranded conductor, 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable of 10 sqmm flat or circular complete all as specified and directed.

S&F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.(Note:- Bracket along with screw to fix on wall/surface will be included in above quoted rate.)

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuity conductor FRLS cable 1100 V grade as continuous earth wire for one light / fan / bell point controlled by one, one way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuty conductor FRLS cable 1100 V grade as continuous earth wire for one light point controlled by two, 2-way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 pin socket outlet 5 Amps on the same board with other switches, complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 pin 5 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

S&F in repair LED lights fitting 1x20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M&L lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F modular switch one way 6 A, 1 module complete all as specified and directed.

S&F modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F bell push, flush type, 5 Amp complete all as specified and directed.

S&F modular bell push 6A, 1 module complete all as specified and directed.

S&F Bell Ding Dong AC 230 volts, single pole complete all as specified and directed.

S&F modular Socket, 6A - 2/3 pin combined, 2 module complete all as specified and directed.

S&F socket outlet 2 in 1,3 pin, 6 Amp complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 4 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 8 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 12 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board TPN double door type concealed in wall 415 volt 4 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F ceiling rose 3 phase, PVC / polycarbonate, isolated body complete all as specified and directed.

Supply and fixing 25 mm external dia Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 06 to 32 AMP, complete with connection testing and commissioning all as specified and directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and 40 to 63 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed.

S&F in repair 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN / FP and 40 to 100 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed.

M&L for boring of existing road / path upto 100mm for laying of GI pipe protection cover to the under ground cable and making good distrubed area / surface all as specified and directed.

S&F in repair of overload protector relay for AC of any type, capacity and make and complete all as specified and directed.

Taking down Fridge / Refrigerator for repair / Servicing of 180 to 320 litre capacity, single phase 230 V, of any make, after disconnecting electric connection and carry out minor repair work such as repairing of internal worn out wires, and for replacement of unserviceable parts such as compressor, motor, thermostatic switch, lead wire, legs and testing complete all as specified and directed. Note : Compressor / Motor / thermostatic switch are measure and paid seperately under respective items.

S&F in repair thermostat for the Smart Geyser (Racold) of 25 litre capacity, ISI marked complete all as specified and directed.

S&F in repair Junction box, size 260x210x116 mm, thermoplastic polystyrene unbreakable suitable for pole mounted outdoor type IP-65 insulated complete with FI clamps & nuts, bolts, washers and including terminal block heavy duty with phase seperators between R,Y,B terminals, including one MCB SP 06 amp 10 kA, all duly fixed on din channel, cable glands for cable entry complete all as specified and directed. Make : Hensel or equivalent make as approved by GE.

LAKSHMI ASSOCIATES (BID ID -3463985)

M/S Sheeba Enterprises (BID ID -3462339)

M/S Anil Enterprises (BID ID -3465180)

Dev Enterprises (BID ID -3459827)