PROVISION OF CERTAIN SPECIAL REPAIR REVENUE AND MINOR WORKS UNDER AGE BR I AGE BR II AGE EM UNDER GE NORTH PATIALA

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as directed and specified.

M&L for Machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry including screed of 20-22 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : 1. The sides (edges) shall be table rubbed with coarse sand or machine rubbed before paving. All angles and edges of the slabs shall be true, square and free from chippings and the surface shall be true and plane., so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

Taking down Shutters of any description exc 1.5 Sqm and n. exc 5.00 Sqm and refixing in the same opening after alteration/cutting etc complete all as specified and directed.

M&L for repair to hinges/sliding bolt and other like works by welding to steel shutter of any size/description exc 1.5 Sqm and n. exc 5.00 Sqm and making good the disturbed potion in PCC 1:2:4 or CM 1:3 complete all as specified and directed.

M&L for complete removal of existing treatment and preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed . Make : Asian Paints/Berger/Nerolac

Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 , on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

M&L for applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

M&L for applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

Dismantling of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed.

M&L for RCC 1:2:4 using 20mm graded stone aggregates as in beams, cantilevers, bressummers, lintels etc complete all as specified and directed.

M&L for formwork of rough finished flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia. complete all as specified and directed.

M&L for TMT Bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia. complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate for foundations complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.

S&F factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make : Asian Paints/Berger/Nerolac

Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and as directed.

Excavation over areas in soft/loose soil n exc 1.5m depth and getting out complete all as specified and directed.

Hard core of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n. exc. 1.50 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal mix) M-25 using 20mm graded graded graded ggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-25 (Nominal mix) using 20 mm graded stone aggregate as in Columns (First Floor) complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-25 (Nominal mix) using 20 mm graded stone aggregate as in Lintel beams complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-25 (Normal mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and Columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. (Roof Slab & projection) complete all as specified and as directed.

Supply only integral water proofing compound.

M&L including wastage of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) offoundation and plinth beams; and similar work; vertical or to batter Rough finished surfaces of concrete complete all as specified and as directed.

M&L including wastage of formwork to sides of pillars, posts, struts, piers, columns and stanchions Rough finished surfaces of concrete complete all as specified and as directed.

M&L including wastage of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete (Projection) complete all as specified and as directed.

S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. (Footing ,Column upto Plinth beam) complete all as specified and as directed.

M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM (1:4) using WPC complete all as specified and as directed.

M&L 150mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L 75mm thick PCC type B-2, (1:2:4) using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for Rendering 15 mm in two coats (10+5) Cement Mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and second coat with WPC complete all as specified and as directed.

M&L for Rendering 5 mm in Cement Mortar 1:3 on fair faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed.

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.m and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. Make : Johnson (Daisy SF/Gloria SF) or equivalent from Kajaria/Somany as approved by AO

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 9-10 mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete (Dado/Striking) complete all as specified and as directed. Make : Johnson (Daisy SF/Gloria SF) or equivalent from Kajaria/Somany as approved by AO

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

S & F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F of Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm complete all as specified and as directed.

M & L for PCC 1:3:6 Type C0 using 12.50 mm graded stone crushed aggregate as in filling in PS door chowkhats complete all as specified and as directed.

M & L for 35mm thick plain framed (Factory made) Panelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seanoned and chemically pressure treated complete all as specified and as directed.

S&F cast iron body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and as directed.

M & L for Preparing new surface of steel material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make : Sika/STP/Fosroc

M&L for 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floorings, roofing finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

M&L for glass dividing strips, 3 mm thick 38mm wide inserted in position, conform to design complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) C-2 using 40mm graded stone agg as in plinth protection finished even & smooth complete w/o using extra cement incl form work complete all as specified and directed.

M&L for form work to edging of concrete , sides of roof slab exc 5 cm but not exc 10 cm wide complete all as specified and directed.

M&L for deformed bars 8 to10 mm dia & over cut to length bent to shape required including binding with 0.90 mm diaMS wire confirming to Fe 410-0 or fe 510-0 complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 over the roof slab when the concrete is green complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement with Water Proofing Compound paid and measered separately complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls,soffits of chajjas & roof projections etc and applying two coats of cement base paint over one coat of cement primer etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

Earth filling under floors,spreeding levelling in layers n.exc 25 cm thick each and well ramming including water as required and removal of the excavated materials complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in sub base for receiving the tiles complete all as specified and directed.

M&L for Non skid ceramic (coloured files) of size 300 x 300 x7mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match scred 15 mm thick in cement mortar(1:4) laid over 25mm thick PCC 1: 2: 4 complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering.

S&F powder coated aluminium glazing/ doors & shutters made out of aluminium anodised section 101.60x44.75x1.75mm for chowkats or frame & shutters made of size 81.25x38.10x1.75mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) above and below middle/lock rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including required nos. of pivots/hinges and brass mortice lock (four levers) and two Nos of keys complete all as specified and directed by Engr-in-Charge including supply and fixing the following items: (a) Powder Coated Aluminium Butt Hinges 100mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made aluminium ventilators with 80 micron powder coating of frame of 127X38.10X1.74 mm and fixed shutters made of 45X45X1.63mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 32 Gauge in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect complete all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size complete in all respect all as specified and directed. Make : Cera (Conventional with built in jet) or equivalent from Parryware/Hindware as approved by AO

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed. Make : Hindware (Sleek Essence Dual Flush) or equivalent from Parryware/Cera as approved by AO

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by AO

S&F Vitreous china wash hand basin white flat back size 550 x 400mm including 32mm CP brass waste fitting, 45 cm long PVC connection with brass nut at both ends,32mm dia PVC west pipe cast iron brackets and making good disturbed surfaces in CM 1:3 or PCC 1:2:4 complete in all respect as specified and directed.

S&F towel rail, CP brass, 20mm dia 'D' type, 60 cm long between flange Chromium plated complete all as specified and directed.

S&F 15 mm dia 450 mm long PVC connections complete all as specified and directed.

S&F 15 mm dia Stop cock cast copper alloy fancy type CP with long shank and cup, screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F Bib taps, suitable for 15 mm bore , as in repair cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe long body and fixed complete all as specified and directed (Weight not less than as specified in SSR)

S & F 15 mm dia pillar taps, cast copper alloy, with capstam heads,chromium plated screwed down high pressure with or without lettered 'HOT' or 'Cold' with long screwed shunks and fly-nuts,screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

M&L CI floor trap with grating including jointing to waste pipe,fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

S & F Steel water tubing 15mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S & F Steel water tubing 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F soap dish chromium plated fixed with brass screws complete all as specified and directed.

S&F Salt glazed stone-ware gully traps, 150 x 150mm size , square or roundmouthed, type 'P' or 'S' incl CI grating fixed complete all as specified and directed.

M & L for 50mm thick plain cement concrete 1:3:6 type C-2, using 20 mm graded stone aggregate as in plinth protections, hardstanding, path finishing the surfaces even and smooth without using extra cement all as specified and directed.

S&F rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position, connecting to inlet or outlet and washout including disconnecting and demolition/dismantling of existing tanks of any description cement all as specified and directed.

S&F Stop cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore pipe fixed in repair all as specified and directed.

All as per sl item No 94 hereinbefore 20mm bore.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 20mm having minimum weight 210gm/each fixed valve complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe, sand cast 100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and directed after taking down of existing unserviceable pipe.

S&F Cast iron soil, waste and vent pipe, sand cast 100mm bore, sand cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified and directed.

S&F Angle valve 15mm dia cast copper alloy fancy type CP with long shank and cup (concealed type) screw down high pressure, screwed both ends for iron pipe or for union and fixed in position complete all as specified and directed.

S&F Cast iron bends duckfoot or heelrest,sand cast radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.

S&F Cast iron branch pieces single sand cast (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access door jointed with lead joint, as in repairs ,complete all as specified and directed.

S&F CI Cowl sand cast suitable for 100 mm bore pipe complete all as specified and directed.

Cutting into existing manholes for 150 mm dia pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Supply and laying salt glazed stone ware drain pipes 150 mm dia (internal ) grade 'A' laid in trenches and jointed in cement mortar 1:1 including testing complete all as specified and directed.

M & L for Concrete bed to drain pipes 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified by Engineer-in-Charge. Make : Johnson (Matt Series-Bottichino Ivory Brown) or equivalent from Kajaria/Somany as approved by AO

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 6-8 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified by Engineer-in-Charge. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow Dark/Light/HL or Sobaro Deep/Bright/Bright Decor) or equivalent from Kajaria/Somany as approved by AO

S&F window / ventilators of Powder coated (minimum thickness of powder coating 50 microns ) aluminium window frame size 110 X 40 x 1.60 mm fixed to wall with PVC rawl plug & 100 mm long steel screws ,side hung shutter made of powder coated aluminium section ( Rail & Style ) 60 x 30 x 1.60 mm fixed with steel srews to aluminium frame with 02 Nos 100 mm long buttt hinge.Each shutter shall be provided with powder coated aluminium 100 mm long handle 01 No ,150 mm long peg stay 01 No , 100 mm long tower bolt 02 Nos. The shutter shall be provided with 5.50 mm thick sheet glass fixed with necessary jointing cleats , glazing clips ,rubber packing ,powder coated aluminium snap beading , screws .Powder coated aluminium grill made of welded mesh of 5 mm thick square bar and 60 mm width of apeture and GI wire cloth 0.56 mm dia ,average width of aperture 1.18 mm fixed with tinned tacks ,flat,cleats,U & T sections of suitable size shall be provided to outer side of frame .Each window shall have minimum 02 Nos side hung shutters of suitable size . All members of window shall be powder coated all as specified and directed .

M & L for Preparation of new surfaces and 2 coats white wash on ceiling complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed. Make : Hindware (WHB-Cleo (Cat No.- 10012), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or equivalent from Parryware/Cera as approved by AO

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete all as specified and directed.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete all as specified and directed.

S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs complete all as specified and directed.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. Make : Jaquar/Marc/Prima

S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and directed.

M & L for Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

M & L for Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion , trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified and directed.

M & L for Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and directed.

S&F for providing 40 mm dia GI pipe medium grade spouts 50 Cm long complete all as specified and directed.

S&F PVC (SWR) bends/tees of any radius for 110mm bore with access door as in repair complete all as specified and directed. Make : Astral / Prince / Finolex

S&F Cast iron soil, waste and vent pipe,75mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls/laid in floors and making necessary connections, fixed as in repair complete all as specified and directed.

M&L cast iron nahani/floor/multifloor trap 100 mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and directed.

S&F single Y-shaped CI junction pieces, ordinary or inverted (spigot or socket type) for 100mm bore pipes complete all as specified and directed.

M&L for cast iron cowls of 75 mm dia complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings.

S&F Framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F Framed for ornamental and intricate design work such as grills, conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete complete all as specified and directed.

M&L Cutting holes in brick walls exc one brick and n exc 2 bricks in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.

M&L for Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) .

M&L for Suspension System for false ceiling consisting of Prelude 32 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 15 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 18kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsmas per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability complete as with the followings :- Suspension System Details 20-06-2020 :- Base Material Hot dipped galvanized steel of 90 gsmas per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability Construction Method Roll formed double stroked rotary stitched construction to mechanically lock together the two metal layers of the vertical web Deflection Loading 18 kg/m with deflection limit less then L/360 as per ASTM C635 Pull-out Strength 100 kg Main Runner Dimensions 3600(L) x 38(H) x 24(W) mm Cross Tee Dimensions 1200/ 600(L) x 38(H) x 24(W) mm Cross Tee End Detail The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam” Wall Angle dimensions 3000(L) x 19(H) x 19(W) mm Main Runner Rout Spacing 150 mm Hanger-wire Material Galvanized Steel with 0.7 micron coating Hanger-wire Dimensions 2.5 mm Ø x 1800 mm Hanger-wire Tensile Strength 344-413 MPa Hanger-wire Pull Strength 110 Kgs Make : Armstrong or equivalent as approved”

M&L minimum 12 mm thick mineral fibre tile with NRC 0.45, pin holed texture for false ceilings, 595x595 (±5) mm in size fixed in false ceiling as per manufacturer's instructions to frame work or on snap grid as in repairs complete all as specified and directed. Make: Armstrog/Gyproc or Equivalent as approved. Note: Frame work for false ceiling shall be measured and paid separately

Taking down aluminium partition of any type and size incl all necessary fitting and making good to disturbed portion complete all as specified and directed.

S & F Powder coated 50 microns extruded aluminium frame for fixed type partition (Standard two panel pattern) made out of powder coated aluminium section of size 63.5 x 38.10 x 1.5mm, comprising of 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle member and 5mm thick tinted glass above middle rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size, complete fixed to floor and wall by means of cadium plated steel screws complete all as specified and directed. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, peace of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FR single core stranded copper conductor for one light/fan in new PVC conduit medium grade 19/20 mm dia to be terminated in and including pressed steel terminal boxes with modular cover plate including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FR single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) NOTE- Rate of Modular metal flush boxes and modular cover plate are included in this item.

All as per Sl item No 141 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 2 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

S & F Modular switch 1 way, 6 Amps, 1 module complete all as specified and directed.

S & F Modular socket 5 pin 6/16 Amps, 2 module complete all as specified and directed.

S & F Modular Fan regulator step type, 120 watts, 2 module complete all as specified and directed.

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals complete all as specified and directed.

S & F Lamp holder incl flexible wire 0.5 Sqmm copper cable all as specified & directed.

S&F LED batten Tube light fitting 1 X 20 Watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.5 Sqmm copper cable all as specified & directed after taking down old unserviceable tube light fitting of any description.

S & F environment friendly , ultra modern ,energy efficient ,surface mounted ,decorative ovak bulk head LED light high brightness of 10 W complete all as specified and directed.

S & F sheet metal enclosure with socket, plug top and single pole MCB (SP) of 20 to 32 amp capacity all as per directed for AC complete all as specified and directed.

M&L for sub main wiring with two single core 4 Sqmm PVC insulated and unsheathed FR ,stranded copper conductor cable drawn through PVC rigid non metallic concealed conduit 25 mm dia incl 2.5 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire complete all as specified and directed.

Provn of BEE 5 star rated ceiling fan 1200 mm ,240v,ac with regulator including fixing with hook complete all as specified and directed.

S & F MCB DB 4 way double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and outgoing cables complete all as specified and directed

S & F MCB, single pole and neutral SPN 240 Volts 20 to 32 AMP capacity fixing in DBs including proper thimble connections complete all as specified and directed

M & L for sub main wiring with two single core 6 sqmmPVC insulated and unsheathed FR, stranded copper conductor cable drawn through PVC rigid non metallic concealed conduit 25 mm dia incl 4 sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire complete all as specified and directed.

S & F MCB, single pole 240 Volts 6 to 32 AMP capacity fixing in DBs including proper thimble connections complete all as specified and directed

S & F exhaust fan 300 mm sweep, 230 V AC including grouting and ANCHOR nut bolts and make surface good complete all as specified and directed.

S & F Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K ,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S & F Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 6500K of capacity 10/12W, 2 ft long incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed.

M & L for point wiring with 2.5 sqmm(22/.3mm) PVC insulated and unsheathed FR single core stranded copper conductor for one light/fan in new PVC Conduit Medium Grade 19/20 mm dia to be terminated in and including pressed steel terminal boxes with modular cover plate including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FR single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) Note: Rate of Modular metal flush boxes and modular cover plate are included in this item.

S& F Modular switch 1 way, 16 Amps, 1 module complete all as specified and directed.

S & F LED batten Tube light fitting 1 X 10 Watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.5 sqmm copper cable all as specified & directed after taking down old unserviceable tube light fitting of any description

Supply and Fix Split AC air conditioner electric driven (single phase), cooling capacity 4500 K Cal per hour (1.5 Ton) rated complete all as specified and directed.

Supply and Fix Voltage stabilizer 4 Kva Capacity complete all as specifeid and as directed.

Supply & fixing of LED Flood light fittings of capacity 120 watts IP-66 , complete with accessories and mountig clamp including suitable nut/bolts/washers etc all as specified and directed at site. Note:- Contractor will submit the manufacturer test certificate and an extended warranty card for two years certificate by manufacturer Make:- Philips/Crompton/C&S/Halonix

Supply and laying XLPE 1100 volts grade heavy duty with PVC insulated, armoured cable, 4 core 10 sqmm in service supply connection passing through trenches, walls, road crossings and poles complete all as specified and directed.

Excavation in trenches in soil n.exe 1.5 mtr wide and 1.5 mtr deep for laying of cables including getting out complete all as specefied and directed.

Supply and filling Dry clean sand for sand cushioning of underground cable complete all as specified and as directed. Note:-Sand shall be measured after punning down.

Supplying and laying un-reinforced precast concrete cable cover , class LV, Type 1, flat of size 250 mm x 150 mm x 40 mm for cable protection, confirming to IS : 5820-1970 and having minimum average load breaking strength 200 Kg/Sqcm complete all as specified and as directed. Make : Surya Kiran Tiles and Pavers / National Tiles Corporation Panchkula / A-One Concrete Pvt Ltd / Unistone Product Ltd New Delhi or approved by competent authority.

Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long)complete with CI base plate and finial all as specified and directed at site.

Supply and fix PVC insulated round/flat copper cable of size 3 core 4.0 sq mm for connection of LED lights from FRP junction box to street light fittings complete all as specified and directed.

Earthing complete with Galvanized steel earth plate 600 x 600 x 6.0 mm buried directly in ground (earth pit not less then 2.25 Mtr deep below ground level) with top edge of the plate not less then 1.5 Mtr below normal ground level connected togalvanized earth lead wire 4.0 mm dia by means of bolts ,nuts ,check nuts and galvanized iron or steel incl excavation and earth work, GI pipe light grade 25mm/40 mm bore for protection of GI wire /strip from earth electrode to and incl the earth test point of gun metal or phosphorus bronze size of size 75 X 75 X 25mm drilled and screwed including, 3 NOS, 8mm dia 25mm long hex, head screw supplying and lying charcoal dust, common salt, PCC 1:3:6 type CI (using 20 mm graded crushed stone aggregate) as in chamber and MS angle iron frame 40 x 40 x 3mm and RCC cover 40 mm thick 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia. TMT bars @ 75mm c/c both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No. 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed.

Supply,Install, Testing and commissioning of self supporting totally enclosed factory fabricated LT feeder pillar box , made out of 3.15 mm thick MS sheet with projected globe roof for rain water protection ,dust and vermin proof, hinged double door shutters with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip, ventilation louvers, bottom detachable gland plate complete with suitable size zink chromium plated nuts, bolts and washers etc outdoor type cubicle panel board suitable for 3 phase 4 wire ,415 volts 50 hz and 50mm x 50mm x 6 mm angle iron frame ,weather proof ventilated with locking arrangement ,including provision of suitable size PCC pedestal for mounting of panel board and comprising the following of size not less than 1.2 m X 1.5 m X 0.45m and including taking down the existing feeder pillar panel board. :- Note Excavation and PCC for grouting/fixing of Panel is including in the quoted rate. (i)Aluminium Bus Bar 63 A supported in suitable size porcelain strand lock with suitable size brass nut, bolt and washers with heat shrinkable colour coded PVC sleaving for three phase and neutral -01 Set (ii)MCB TPN 40 A 16 KA 415 Volts 50 Cycles-01 No (as incoming) (iii)MCB TP 10 A 16 KA 415 Volts 50 Cycles-1 Nos(as outgoing) (v)LED Phase Indication Lamp-03 Nos( R,Y,B) with switch control (vi)Contactor set for 3 pole contactor AC-3 phase 40 A 415 Volts (vii)Electro Mechanical Timer Switch 230V ,6 A-01 Nos (viii)The feeder pillar box shall be mounted on PCC pedestal of size 600 mm X400 mm and 700 mm height (02 Nos for each panel board),with cement concrete 1:2:4 type B1 using 20 mm greaded stone aggregate. (ix) The rate quoted shall be demed to include for the above provisions.

Suppy and fix Rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles,pipe hooks etc. complete all as specified and directed.

M&L for iron frame work of suitable for symmetrically fitting of 4 Nos of LED Flood light fittings of capacity 120 watts and mounting on steel tublar pole complete with MS clamp bolts and nuts complete all as specified and directed.

Buttar Construction Co.

Arneja Builders

AR CONSTRUCTIONS

m/s panchmukhi builders

M/S RAJ KUMAR GUPTA