IIRQP/ Strengthening Work under Road division Jamshedpur (A) Marine Drive to Rankini Mandir Road via Anil sur Path - Uliyan Chowk and Green Park Road D Road Kadma, (B) Marine Drive ( Sati ghat) Uliyan Chowk Road ,and (C) Marine Drive to Ramnagar Par

Amount

(RCD SOR- 2.03 (ii) A ) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and tress girth upto 300 mm, removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking of sericeable material to be used of auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness.

(RCD SOR-2.06 ) Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a alead of 1000 metres, stackiung serviceable and unserviceable materials separately

RCD SOR-3.06) Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m

RCD SOR- 3.19 ) Construction of Embankment with Material Deposited from Roadway Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300-2.

RCD SOR-4.01 AB (v) ) Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.Rate per cum for grading-V Material

RCD SOR-12.08 A ) Plain/Reinfoced Cement concrete in open foundation complete as per drawaing and technical specifications.PCC grade M-15 using batching plant and concrete mixture

RCD SOR-13.05 C ) Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specificationsPCC Grade M25 using batching plant, transit mixer & concrete pump

RCD SOR-5.02 (iii) Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

RCD SOR-5.02 (i) )Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

RCD SOR-5.04 B ) Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @4.5 percent by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 505 complete in all respects.

RCD SOR-5.05 B) Bituminous concrete Grading- II with VG-30 Grade Packed Bitumen . Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects.

RCD SOR-8.13 ) Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

RCD SOR-8.04 (ii) Retro-Reflectorised Traffic Signs, 90 cm equilateral triangle Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.

RCD SOR-8.04 (viii) Retro-Reflectorised Traffic Signs, 60 cm circular . Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.

RCD SOR-8.04 (x) Retro-Reflectorised Traffic Signs, 80 cm x 60 cm rectangular .Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.

RCD SOR-8.05 Direction and Place Identification Signs upto 0.9 sqm Size Board .(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)

RCD SOR- 15.03 Sand Filling in Foundation Trenches as per Drawing and Technical Specification

DSR- 16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge

(DSR- 16.84 ) Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost)

(RCD SOR- 4.23 B amendment) Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction of approved size, design and shape, laid in required colour and pattern over bed as per relevent IRC -code filling the joints with fine sand etc, all complete job as per direction of engineer -in- charge.

RCD SOR- 8.01 (ii) PCC M20 for Kerb Cast in situ Cast-in-Situ Cement Concrete M20 Kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409)

RCD SOR- 11.18 ) Wrought iron and mild steel welded work (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately

RCD SOR-2.04 (i) II A ) Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concree, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with allk lifts and lead of 1000 metres. Lime/ Cement concrete, By Mechanical means , Cement Concrete Grade M-15 & M-20

RCD SOR-2.04 (ii) B ) Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concree, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with allk lifts and lead of 1000 metres. Dismantling Brick/ tile work , By Manual means, In cement mortar

RCD SOR-13.01 ) Brick masonry work in 1:3 in substructure complete excluding pointing and plastering, as per drawing and Technical Specifications

RCD SOR-13.03 ) Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications

RCD SOR-12.01 B(i) ) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

RCD SOR-12.08(A) ) Plain/Reinfoced Cement concrete in open foundation complete as per drawaing and technical specifications.PCC grade M-15 using batching plant and concrete mixture

RCD SOR-13.05 E (p) ) Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications RCC grade M-20 using batching plant , concrete mixture and concrete pump.

RCD SOR-13.05 G (p) ) Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC grade M-30 using batching plant , concrete mixture and concrete pump.

RCD SOR-13.06 ) Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications

8.7A ) Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans)

12.8C ) Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. RCC Grade M20.

12.40 ) Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications

NS ) Fixing of reflective sheeting including all cost of materials and fitting charge complete works as per specification and direction of E/I.

Add 18% GST :

Add 1% Labour Cess:

M/S. R. K. CONSTRUCTION