GE/H-12/2020-21 NAME OF WORK PROVN OF ADDITIONAL LAVATORY BLOCK (GENTS AND LADIES) ADJACENT TO THE EXISTING COMMON TOILET BLOCK AT GF AND PROVN OF 3 TOILET AT CHEMOTHERAPY DAY CARE CENTRE AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT 10

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Removal of surplus soil to a distance exc 25 Km & depositing where directed

M & L Cement concrete type B2 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc ocmplete all as specified and directed.

M&L for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.

M & L for brick work with sub class B bricks old size, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as directed.

RFR in hard dense soil including spreading, levelling, watering, and well ramming in layers not exceeding 25 cm ctc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as sub base 100 mm thick finished cement concrete surfaces by broom finish.

M&L for cutting into existing manholes for inserting SWG / RCC pipe upto 150mm dia and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-I, smooth finished and reforming benching as required, complete all as directed.

M&L for 150 mm bore reinforced concrete pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M & L for mild steel TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0

All as per item No. 11 above but 6 to 8 mm dia bars

All as per item No. 11 above but 5 to 10 mm dia as in stirrups / spacers

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in footing, foundation, plinth beams complete all as specified and directed by Engr-in- Charge.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in slab supported on walls , beams etc complete all as specified and directed by Engr-in- Charge.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in columns complete all as specified and directed by Engr-in- Charge.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in beams complete all as specified and directed by Engr-in- Charge.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in lintels n exc 1.5m span complete all as specified and directed by Engr-in- Charge.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in chajjas complete all as specified and directed by Engr-in- Charge.

Use and waste of form work to concrete foundations/footings for flat surface finished fair complete all as specified and directed by Engr-in- Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

Use and waste for form work to soffits and sides of chajjas (horizondal or sloping) complete all as specified and directed byEngr-in- Charge.

Use and waste of form work to sides of columns rectangular or square on plain, fair finished complete all as specified and directed by Engr-in- Charge.

Use and waste for form work to sides and soffits of beams, fair finished complete all as specified and directed by Engr-in- Charge.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.

M&L for rendering 10 mm thick on concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement.

M&L for 75 mm thick Cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) asin plinth protection, paving floors etc all as specified and directed

M&L for Digital coloured tiles incl high lighter 450x350x7mm, 450x300x7mm/350x250x7mm tiles (Premium Quality) in verticle surfaces set and jointed with neat cement slurry and pointed in white cement with pigment to match with the shade of tiles as per manufacturer's instructions complete all as specified and as directed by the Engr-in-Charge.

M&L for joint free non skid ceramic coloured tiles of size (400 x 400) x 7-8mm thick set and jointed with neat cement slurry and pointed in white cement with pigment to match the shade of tiles all as per manufacturer's instructions complete as specified and as directed by the Engr-in-Charge.

M & L 18 mm thick granie of any type machine cut,bedded and jointed with gray cement slurry and pointed in white cement with admixture of pigments incl grinding and polishing all as specified and directed by Engr-in Charge.

S&F, Powder coated aluminium section of size 100x44x1.5mm with rebate as in chaokhat/frame complete all as directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws etc complete all as specified and as directed.

S&F 1.5 mm thick section aluminium anodized glazed window shutter, styles & rail 44mm x 44mm including all fittings, such as aluminium handle of size 100mm ,two no aluminium hinges of size 75mmeach ,two no aluminium anodized tower bolts of size 100mm, with each moving leaf etc complete all as specified.

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section including frame work complete, consisting of frame vertical and horizontal members, of size 104mmx44.45mmx1.8mm thick. Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading including frosted film as directed fixing of hydraulic floor spring one in single leaf or two Nos in double leaf door of Make Kelvin/Evershine. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. (Sheet glass Plain/frosted shall be measured and paid saperately under respective item of schedule )

S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane. (For new and old ventilator)

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth all as specified and directred

S & F 15 mm bore medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors etc complete all as specified and directed .

S & F 20 mm bore medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors etc complete all as specified and directed .

S & F 110 mm dia PVC rainwater pipes fixed to wall/floor etc complete all as directed by Engineer-in-charge.

S & F PVC (SWR)bends 110 mm bore any radious

S & F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S & F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed.

S&F10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor complet all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified.

S & F white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S trap, PVC solid type seat cover etc complete.

S & F white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc complete.

S&F vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete

M & L Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms)

S&F vitreous china urinal partitions white of size 310X700mm, slabs, terminating about 40 cm above floor line complete all as specified and directed.

S&F 15 mm bore Concussive push button taps of cast copper alloy, screwed for PPR pipe complete all as specified and directed.

S&F Door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg

S&F vitreous china wash basin, white colour, flat back type, of approx size 580 x 450 mm (for hospital use) including waste coupling, wall bracket, waste pipe of suitable size etc, complete all as directed.

S&F handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F two way bib cock suitable for 15 mm bore water pipe, with & including wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F Braided hoses 450mm long (make -Jaquar Cat No ALD-803B or equivalent in , GEM, MARC, Parko )

S&F two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified. Make : Jaquar (LYR-38041) / Hindware (F110003) / Cera (CS 306A).

S&F 15mm Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated, complete all as directed. Make: Jaquar/ GEM/ Marc/Parco.

S&F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as directed

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvant cement etc ocmplete all asa specified and directed.

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories , complete all as directed. Make : Armstrong / Gypboard / Anchorlam anchor ( Note; The tiles shall be measured and paid seperately under respective item of schedule.)

M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600mm size, complete all as directed. Make : Armstrong / Gypboard / Anchorlam anchor(Note : The grid /frame shall be measured and paid for separetly.)

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed

M&L for preparation of newly plastered Ceiling surfaces and providing a layer of 1-2 mm thick wall putty on plaster surfaces of wall preparation to receive plastic emulsion/distemper etc, complete all as directed. Make : JK Wall putty/ Birla White Putty.

M & L for preparation of newly plastered wall surfaces, over 10cm girth, applying two coats of weather resistant emlusion exterior grade over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.

Supply only integral water proofing compound.

Demolition of Cement Concrete of any descrition and in any position not otherwise provided for and disposing off the material exc. 1.5Km and n.exc 5.00 Km complet all as directed by Engr-in-Charge.

M&L for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent as per manufacturer's instruction and finishing the surface seven and fair. (Water Proofing Chemical shall be measured and paid seperately)

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Rendering 5 mm thick on concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement.

M&L 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes all as specified

M & L for Vitrified Coloured ceramic tiles flooring 10mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer or mortar 15mm layer of mortar for laying floor finishes

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked in concealed PVC conduit medium grade wall thickness not less than 1.6mm and 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size including top cover of suitable size for fixing modular switches / sockets / fan regulator etc and making good surface as original by plastering and whitewash/ colour/ distemper etc, complete all as directed for one light point / fan point / exhaust fan point / bell / buzzer controlled by 1-way switch/ bell push. (Note : The cost of modular type Metal boxes and modular accessories like inner/outer cover plates etc will be included in quoted rate.)

All as per srl item No. 77 here in before but point wiring for one socket outlet point 5 amps on the same board.

Supply and fixing Switch piano flush type, single pole, one way, 5/6 Amps complete all as directed.

S&F socket flush type, 6 amps 2 & 3 pin combined,230 volts AC all as specified

Supply and fixing Ceiling rose, PVC polycarbonate body isolated body, 3 terminal, 240 volts, 5 Amps complete all as directed.

S&F exhaust fan 300 mm sweep with louver, heavy duty, 230 volts, single phase,1400 RPM all as specified complete all as directed

Supply and fixing Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

M&L MCB 6 to 32 Amp, C Curve type, 10kA, single pole with over load and short circuit protection complete all as directed.

All as per srl item no 84 here in before but of 32 amps capacity and SPN type.

Supply and fix energy efficient wall/ciling mounted LED bulk head light fitting 10 watt, IP-65 and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc complete all as directed.

S&F tube light fitting 10 watt (CW), 2 feet long in extruded aluminium batten with high efficient LEDs available in clear & milky diffuser and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240Vcomplete all as directed.

Supply ,laying and testing cable XLPE insulated, screened, PVC bedded galvanized steel strip armoured electric power cable heavy duty 110 volt grade with stranded aluminium conductor of size 10.0 Sqmm ,2 core laying on wall including saddling complet aal as specified and directed

S&F Modular switch 6 Amp, 1 module size complete all as specified and directed.

M&L submain wiring with 2 run of 4 Sqmm ( nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit 20 mm bore and wall thickness not less than 1.6 mm and including 4 Sqmm (nominal dia) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB complete all as specified and directed. Note: The two run of 4 Sqmm wire and one run of 4.00 Sqmm wire shall be measured and paid as one lenght.

sony engineering works

New Era Engineers