Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC AZAD ROLLING SHUTTERS AND CONSTRUCTION MOHAN CINEMA ROAD OPPOSITE J P MARKET KOTA RAJASTHAN 324006 | KOTA | RAJASTHAN | 324006 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹34.0 L+₹1.1 L (3.21%)Rejected-Finance ROOM NO 608 BLDG NO 06 R B T CO OP HSG SOC NEW CHIKUWADI MANKHURD W MUMBAI 400043 | MUMBAI SUBURBAN | MAHARASHTRA | 400043 | L2 | Rejected-Finance Being L2 |
Tender Value
₹35.7 L
EMD Value
₹71,340
Closing Date
4 Nov 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Head, CED
CED,BARC,Trombay, Mumbai
Replacing, Repairs and servicing of existing steel rolling shutters on sea side building, North Site, BARC, Trombay, Mumbai-Year 2022-23.
2022_BARC_717702_1
BARC/CED/ET/48/2022-2023 Dated 13.10.2022
Open Tender
Civil Works
Item Rate
365 days
Sea side building, North Site, BARC, Trombay, Mumbai
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹71,340
Yes
17 Mar 2023
13 Oct 2022
10 Nov 2022
17 Oct 2022
4 Nov 2022
17 Oct 2022
Amount
Servicing of the following type of rolling shutters of different sizes maximum size upto 6m x 7m including dismantling for over-hauling of individual parts for repairing and refixing after repairs i.e. top hood shaft cage, shaft case shaft brackets, springs, main curtain with lathe or mid bar type grills, wicket gate, side guides bottom tails, gear units, bearings, electric motors, starters and thoroughly cleaning all the components, adjusting the tensioning springs, if required overhauling or repairing shaft and gear units, re-conditioning end clips, re-aligning curtain ends, reconditioning dents if any, on the surface bottom rail and side guides, repairing the starter, inspecting, taking out and replacing the damaged or defective components (replacement of parts at extra rate is shown under item No.2 below), ensuring proper locking arrangements from both side and outside including all welding, drilling straightening, grinding, scaffolding, ladders, tools, tackles, with all consumables, such as lubricants, kerosene, grease etc. and shall hardware such as nuts, bolts, rivets, washers, keys, etc. making good any damages to civil works, cleaning, oiling, greasing and demonstrating proper functioning of the shutters after each service such as nuts, bolts, rivets, screws, washers, keys and necessary scaffolding etc. all complete as per direction of Engineer-in-charge at site. Electrically operated type with lathe or grilled curtain, mechanical gear operated and pull & push type rolling shutters. (All types of Rolling shutters) Notes : 1) Measurement will be done once only, for entire contract period. 2) The measurement of Rolling shutters will be as per structural openings, Hood etc. will not be measured separately.
Providing, Supplying and replacing in position wherever required the following parts after removing the damaged old part carefully including all labour, taxes, duties, scaffolding, transport, welding, drilling, grinding, tools, tackles etc. and with applying one coat of primer wherever required, including transporting the dismantled M.S/ metal scrap and depositing at Trombay stores as directed by the Engineer-in-charge at site. Up to 5.00 M Height
G. I. Laths - 18 G X 75 mm made from CRCA Sheet.
M.S Bottom Rails (pressed type 10G with locking arrangement, handles, etc. in both ends and sides.
Providing, supplying, fabricating and assembling Shaft asembly for Rolling shutters using Heavy M.S. Pipes, springs & ring pully complete including erection.
Providing, supplying, fabricating and fixing M.S. hood cover with 0.90 mm thick M.S. sheet with supports for rolling shutters complete including erection
Providing, supplying and fixing minimum M.S.guide channels with supports for existing rolling shutters complete including erection.
Providing, fixing by welding M.S. handles for Rolling Shutters.
Providing & fixing Gear warms.
Providing, supplying and fixing dead locks in Rolling shutters, necessary bolt & nuts complete including erection.
Providing, supplying and fixing gear wheel to existing rolling shutters complete including erection etc. complete.
325 mm Dia
250 mm Dia
Providing, supplying and fixing Coiled Springs made from best steel
Providing, supplying and fixing Springs in Rolling shutter Shaft including necessary bolt & nuts complete including erection. For rolling shutter up to 5.00 metres height
Providing, supplying and fixing springs in rolling shutter shaft including necessary bolt & nuts complete including erection. For rolling shutters above 5.00 metres height.
Providing, supplying and fixing gear box complete set with gear wheel, handle etc full assembly complete including erection.
Providing, supplying and fixing Side Brackets for Rolling Shutters Complete including erection.
Removing existing damaged rolling shutter and transporting the same to Trombay village stores in truck or tempo. The rates are inclusive loading unloading complete all as directed.
Supplying and fixing Rolling shutters of approved make as per ISI standards made out of required size of MS lathes 18 gauge interlocked together throughout entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets, side guides and arrangements for inside & outside locking with push and pull operation complete including the cost of providing and fixing necessary springs of required size and M. S top cover of required thickness for rolling shutters.
Rolling shutters gear operated type with handles including top hood 0.90 mm thick.
Extra over the cost of rolling shutters for providing wicket gate of specified size in the M.S rolling shutters including fixing with fixing arrangements, hinges, locking arrangements, frames etc. all as per standard specifications and as directed by the Engineer-in-chargecomplete.
Extra over the cost of rolling shutters for providing and fixing motorized arrangements (with remote & manual operation) including designing, control panels, limit switches, required wiring and cables from panel to motor and required size of shaft etc. of approved make all as per standard specifications including commisioning and testing complete as directed by the Engineer-in-charge. (only power supply point will be provided)
for rolling shutters up to 15.00 sq.m opening area.
For rolling shutters above 15.00 sq.m and up to 30.00 sq.m opening area.
For rolling shutters above 30.00 sq.m and up to 45.00 sq.m opening area.
Extra for providing grilled rolling shutter manufactured out of 8 mm dia MS Bar instead of lathes as per specifications, design approved by the Engineer-in-charge complete
providing , Applying one coat of primer with ready mixed red oxide primer of approved brand and manufacturer on steel works including preparation of the surfaces, scaffolding complete. As per specificaton and as directed by the project Engineer.
Providing and painting two coat on steel surfaces with synthetic enamel paint of approved brand and manufacture to give an even shade over a primer coat including preparation of the surfaces, scaffolding complete. As per specifications and as directed by the Project Engineer.
Providing, supplying and fixing hollow metal flush steel doors 40 mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I. Sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortide/ dead lock of approved make , a pair of 200mm long stainless steel handles , 250 mm long stainless steel tower bolts, etc. frame hollow portion filled with PCC1:2:4 necessary hold fast embedded in concrete, fixing in concrete with anchor fastners,finished with polyurethane painting of approved colour complete all as per drawings and specification and as directed by the Engineer-in-charge.
Dismantling doors, windows and clear storey openings (steel / wood )shutter including chowkhats,architraves, holdfast etc. Complete and stacking within 100m lead (full windows) of area 3.00 sq. M and below
Dismantling brick work in cement mortat carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge.
dismantling old plaster carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead
Providing 15 mm thick plastering using Ready mix plastering compund of approved make for internal faces of brickwork / concrete surfaces including preparation of surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge.
Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.
B.L.Waghmare Baba & Co
stage.html
html • 0.04 MB
techsummary_754901.pdf
PDF • 0.32 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_754901.pdf
PDF • 0.31 MB
WOET48.pdf
PDF • 5.70 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .