PETTY REPAIRS TO MEET DAY TO DAY MAINTENANCE FOR SANITARY FITTINGS FIXTURES REPLACEMENTS OF JOINERY FITTINGS FIXTURES FLOOR TRAPSSOIL PIPES WASTE VENT PIPESBENDS YT JUNCTIONS VERTICAL STACKS GI PIPES ETC AT ANY LEVEL IN ADE DEBAL AT BANGALORE

Amount

Supply and fix in repairs aluminium alloy anodised sliding door bolt with hasp, staple extruded sections of length 300 mm, complete all as specified and as directed.

Supply and fix in repairs MS butt hinges medium weight cold rolled mild steel of size 100 mm by welding to existing frame complete all as specified and as directed

Supply and fix in repairs single action spring hinges of size 125 mm mild steel with steel wire spring, stove enameled black, by welding complete all as specified and as directed

Supply and fix in repairs aluminium anodised barrel tower bolts of extruded section of length 100 mm all as specified and as directed.

All as per item No : 4 here-in-before, but length of tower bolt 150 mm complete all as specified and as directed

All as per item 4 here-in-before, but length of tower bolt 200 mm complete all as specified and as directed

Supply and fix in repairs motice lock vertical type 6 levers 100 mm, complete all as specified and as directed

Supply and fix in repairs hasp and staple safety type of size 100 mm of aluminium anodised, complete all as specified and as directed

Supply and fix in repairs brass CP 20 mm dia tubular towel rail 'D' type 600 mm long, complete all as specified and as directed

Supply and fix in repairs aluminium extruded alloy handle fabricated type anodised of size 150 mm, complete all as specified and as directed

Supply and fix in repairs 40 mm dia cup board knobs fixed with nut, screws and washer of brass polished, complete all as specified and as directed

Supply and fix in repairs 20 mm dia aluminium anodised tubular curtains rod complete all as specified and as directed

Supply and fix in repairs aluminium anodised brackets for curtain rod of 20mm dia all as specified and as directed.

Supply and fix in repairs small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like made out of 1st class hard wood including all necessary labours; articles n exc 200 cu cm each complete all as specified and as directed

Supply and fixed in repair aluminium anodised powder coated sliding type window and ventilator shutters; without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handles etc complete all as specified.

Supply and fix in repairs aluminium powder coated sections for partitions aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handles etc complete all as specified.

Supply and fixed in repair 12 mm thick prelaminated particle board interior grade laminated on both faces complete all as specified and as directed

Supplied and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

Supply and fixed in repairs Aluminium (Die cast) body door closer, hydraulically regulated designation No 3, univeral type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete.

All as per Ser item No 19 here-in-before but suitable for door shutters of 701 to 850 mm width and of weight between 31 to 60 Kg complete all as specified and as directed

Supply and fixed in repair aluminium anodised pivots for aluminium doors complete all as specified and as directed

Supply and fix venetian blinds vertical type 100 mm width with approved fablric and powder coated aluminium fittings such as top rails, metal weight nylon button loops etc to ,match with the top rail metal base complete all as specified and dircted including dismantling unservicing one.

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts all as specified and as directed.

Supply and fix in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm each in each pane including hacking out old broken glass from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones etc all as specified and as directed.

All as per item 26 here-in-before, but with 4 mm thick figured glass complete all as specified and as directed

Material and labour for 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work fixed in repairs.

Material and labour for external teak wood lipping 6 mm thick, fixed with nails fixed to particle board of 19 mm thick.

Supply and fix in repairs rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) of capacity 500 ltrs in repairs complete all as specified and as directed

All as per item 30 here-in-before but 1000 Ltrs capacity complete all as specified and as directed

Supply and fix in repairs 15 mm CP stop valve or angle cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union all as specified .

Supply and fix in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe all as specified .

Supply and fix repairs brass spindle all as specified in repair of Bib Tap, Stop Valve,angle cock.

Supply and fix in repairs 15 mm dia of bore bib tap standard of PTMT [Minimum weight for 15 mm – 90 gms] any colour high pressure screwed for iron pipe all as specified and as directed.

All as per item No : 35 here-in-before but long body [Minimum weight for 15 mm – 120 gms].

Supply and fix in repairs 15 mm CP cast copper alloy bib taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

Supply and fix in repairs brass chromium plated bottle traps for WHB with inlet and outlet screwed for pipe including necessary packing union and cap 32mm bore of trap complete all as specified and as directed

All as per item No 38 herein before but 40mm bore complete all as specified and as directed

Supply and fix in repairs 15 mm pillar taps, cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

Supply and fix in repairs pillar tap of PTMT fancy type of 15 mm dia any colour high pressure screwed for iron pipe [Minimum weight for 15 mm – 120 gms] complete all as specified and as directed

Supply and fix in repairs 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe [Minimum weight for 15 mm – 90 gms] all as specified .

Supply and fix in repairs 20 mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified .

All as per item No : 43 here-in-before but 25 mm dia [Minimum weight for 25 mm – 455 gms].

Supply and fix in repairs PTMT waste coupling of 32 mm dia ( half or full threaded ) complete all as specified and as directed [Minimum weight for 32 mm – 45 gms].

All as per item No : 45 here-in-before but 40 mm dia [Minimum weight for 40 mm – 60 gms].

Supply and fix in repairs grating of 100 mm dia of PTMT, complete all as specified .[Minimum weight-25 gms].

Supplying and fix in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified.

All as per item No : 48 here-in-before but 600mm lengths, all as specified and as directed.

Supply and fix in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern including jointing to squatt pattern closet and making good the floor.

Supply and fix in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’s including cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 160 mm.

Supply and fix in repairs 10 Ltr capacity PVC symphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and as directed

Supply and fix in repairs vitreous china white wash hand basin 550mm x 450mm complete all as specified and as directed

Supply and fix in repairs water closet seat cover white or black colour closed pattern with flat bottom complete all as specified.

Supply and fix in repairs polyethylene water tank cover with hinges suitable up to 1000 Ltrs tanks, all as specified .

Supply and fix in repairs 32 mm waste pipe of PTMT high density plastic pipe straight and all as specified .

All as per item No : 56 here in before but 40 mm waste pipe.

Material and labour for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed.

All as per item 58 here-in-before but 20 mm dia.

Supply and fix 20mm dia HDPE pipes of pressure rating 6 Kg / cm2 fixed to walls, ceilings or in floors, including taking down old HDPE pipe fixed in any position complete all as specified and as directed.

Supply and fix in repairs 15 / 20 & 25 mm GI fittings like elbow, tee, socket, reducers like fittings fitted to existing line all as specified and as directed.

Supply and fix in repairs window handles(left/right) all as specified

Supply and fix in repairs for stop leaking of any component with M Seal all as specified

Supply and fix in repairs spindal (heavy) for taps all as specified

Supply and fix in repairs syphon kit as required for low level flushing cistern all as specified

Supply and fix in repairs 20 mm tank nipple all as specified

Material and labour for welding in repairs to steel windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded n. exc 6mm complete all as specified and as directed.

Supply and fix health facet chromium plated with flexible pipe including fixing bracket make Jaguar CAT No 573 or equivalent.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and as directed.

Material and labour for 40 mm thick plain cement concrete 1 : 2 : 4 type B-1 (using 20 mm graded stone aggregate) as in floors, finishing surface even and smooth by using extra cement all as specified and as directed.

Material and labour for 50 mm thick plain cement concrete 1 : 3 : 6 type C-1 (using 20 mm graded stone aggregate) as in paving finished fair and even complete all as specified and as directed.

Material and labour for renewing tiles in patches area n.exc 5.00 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new ceramic tiles to match the existing floor complete all as specified and as directed.

Dismantling of floor or wall tiling including cement mortar bedding, and disposing of debris outside MD land all as specified and as directed.

Material and labour for 15mm thick screed bed or bedding layer of mortar CM 1:6 for laying floor finishes complete all as specified and as directed

Material and labour for 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing coat for fixing wall tiles.

Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregates) as in flooring.30mm thick complete all as specified and as directed

Material and labour for coloured glazed ceramic wall tiles of size 300mm x 450mm x 6 mm thick as in dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles of size 300mm x 300mm x 7 mm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and as directed.

Cutting screwing existing steel tubing of 15mm dia for addition/alterations pipes at any ht (max. : 25 M Heigt) etc complete all asspecified and as directed

All as per Item srl No. 79 above, but 20mm dia complete all as specified and as directed

Taking up or down 15mm dia GI old tubing and conncetions including cleaning and re-fixing in new or old positionand at any ht (max. Height 25metre) to walls/chases/ceilings or laying in floors etc complete all as specified and as directed.

All as per Item srl No. 81 above, but 20mm dia complete all as specified and as directed

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land all as specified and as directed.

Material and labour for 15 mm thick rendering in CM 1 : 6 on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement all as specified and as directed.

Material and labour for 10 mm thick rendering in CM 1 : 3 on fair faces of concrete surfaces finished fair and even complete all as specified and as directed.

Material and labour for raking out joints in floor / wall tiling and pointing with white cement mixed with water proofing compound and pigment to match complete all as specified and as directed.

Material and labour for applying two coats of oil bound distemper over a coat of primer on previously untreated surfaces of wall including preparation complete all as specified and as directed.

Material and labour for applying three coats of white wash on wall surfaces of including preparation complete all as specified and as directed.

Material and labour for applying Two coats of exterior emulsion (weather coat ) over a coat of primer after application of two coats of putty etc complete removal of existing/New surface and all as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 250 Ltrs but not exc 500 Ltrs all as specified and as directed.

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed

All as per item 91 here-in-before but 110 mm dia .

Taking down existing PVC pipe of any dia and description and re fixing in old or new location complete all as specified and as directed.

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends all as specified and as directed.

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends all as specified and as directed.

Supply and fix PVC (SWR) branch piece single equal of bore 75 mm dia, , in repairs all as specified and as directed

Supply and fix PVC (SWR) branch piece single equal of bore 110 mm dia, , in repairs all as specified and as directed

Supply and fix PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.

Supply and fix CI floor trap 100 mm dia out let with grating including jointing to waste pipe fixed in PCC 1:2:4 type B1, including taking down old floor trap with grating all as specified and as directed.

Removing vegetation growth / plants of any size at the junction of SWR pipe and wall, parapets up to roots and making good the surface in CM 1:3 up to height of 16 m all as specified and as directed.

Supply and fix in repairs wash down water closet (Pedastal pattern) white excluding fixing bolts, flushing cistern and flush pipe

Supply and fix water closet (Orissa pattern) size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe)

Dismantling ceiling boards including cover fillets.

Providing and fixing of damaged ceiling with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34, light reflectance approx 84%, Thermal conductivity K=0.052 - 0.057 W/mK ,colour white, fire performance of class - I as per BS 476 part 6&7in module size of 600 x 600 x 16 mm thick suitable for green building application with recycled content of 38-41%. Perimeter trim consist of size 3000 x 19 x 19 mm secured to walls with screws. Make (Armstrong).

Supply and fixed in repair solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers

Providing & fixing GOLDEN/OZONE make fitting for doors/partitions with 12 mm thick wave free toughened with eching clear glass with heavy duty floor pivots stanless steel 300 mm handle & hinge/pivots with approved multipurpose looking arrangements as per desighn and drawing indcluding providing with all other necessary fixtures and accessories complete all as specified and as directed.

Taking down steel ventilators and steel windows area not exceeding 1.5 Sqm each.

Taking down frames but with shutters( without taking out shutters from the frame) from the frame n exc 1.5 sqm each

Taking down chowkhats or frames with shutters (without taking off shutters from frame) area exc 1.5 sqm but not exc 4.00 sqm each (cupboard shutters)

Taking down shutters of any decription area exc 1 sqm but not exceeding 2 Sqm each.

S& F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour pVC sheet reinforced with MS square tube for fixing shutter

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Supply and fix windows with side hung shutters including projecting/box type hinges with steel handle and steel peg stay complete with glazing bars, dove failed or welded.

Supply and fix steel ventilators with top hung shutters including hinges, steel peg stay etc complete.

Supply and fix 35 mm thick 2nd class HW factory made panelled shutters with lock rail and panels of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces conforming to IS-1003 complete all as specified and as directed

Supply and fix factory made solid panel PVC door shutter 30mm thick [styles wood grain printed 5 mm thick x 15 mm wide PVC beading used inside styles and rails and decorative PVC beading of 10 mm x 10 mm etc complete.

Supply and fix 35 mm thick 2nd class Hard wood glazed & skeleton shutters open rebated and prepared to receive glass gauze etc edges of framing plain, chamfered or rounded, fitted with cut and beads for securing glass etc sizes of members as specified in SSR Part - I section 8 clause 8.23 [a] supplied and fixed to chowkhats.

S&F plain fillets of second class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 3 & n exc 6 sq cm.

Supply and fix 30 mm wide Mild steel piano hinges bright finish.

Supply and fix ball catches with 8mm dia, steel ball and brass body and striking plate.

M & L for machine cut black granite slab 20mm thick fixed over cement screed base in CM 1:6 of 15mm thick bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including demolition of old one, rubbing and polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

Re-securing or easing and adjusting without taking down shutters of any description and size all as specified and as directed.

Material and Labour for applying silicon sealant in the gaps of windows in repairs all as specified and as directed by Engineer in charge.

Material and Labour for fixing rubber beading in repairs Aluminium windows all as specified and as directed by Engineer in charge.

Removing and refixing in same position of anodised aluminium doors,repairing the floor spring, adjusting door etc. and fixing complete all as specified and as directed by Engineer in charge.

Note 1 : Contractor /or his representative should attend the complaint center at ADE & DEBAL to collect & note the day to day complaints in Pucca Bound Register & complaint slips (Dockets) & update the completed complaints on the same register against the completion coloumn at the end of everyday Note 2 : Scope of work shall be in ADE buildings for G+5 and/or up to 12 mtr height. Rate shall be quoted accordingly

AishwaryaConstructions

ARCHANA CONSTRUCTION CO

RAHUL ENTERPRISES

SAI CONSTRUCTIONS

yuvan constructions

Vishwas Enterprises

Prashanth Associates