PROVN OF SOLID WASTE MANAGEMENT SYSTEM AT BENGDUBI MIL STN UNDER GE BENGDUBI

NOTE (Applicable for all Parts/ Items):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

SCHEDULE 'A' PART-II (SITE CLEARANCE , DEVELOPMENT EARTH WORK AND EXCAVATION) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 1000692.59 Inserted by the MES in Schedule 'A' Part-II.

SCHEDULE 'A' PART-IIl (ROAD/PATH/HARDSTANDING/CULVERT) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 6850676.7 Inserted by the MES in Schedule 'A' Part-III.

SCHEDULE 'A' PART-lV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 174722.32 Inserted by the MES in Schedule 'A' Part-IV.

SCHEDULE 'A' PART-V (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 872294.1 Inserted by the MES in Schedule 'A' Part-V.

SCHEDULE 'A' PART-Vl (COMPOUND WALL/ GATE ) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 2477019.18 Inserted by the MES in Schedule 'A' Part-VI.

SCHEDULE 'A' PART-Vll (LIGHTNING PORTECTION SYSTEM) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 167004.00 Inserted by the MES in Schedule 'A' Part-VII.

SCHEDULE 'A' PART-Vlll (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 309291.02 Inserted by the MES in Schedule 'A' Part-VIII.

SCHEDULE 'A' PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents. Representing ** _____ % ______ percent *Above / Below the lump sum price of Rs. 3716088.00 Inserted by the MES in Schedule 'A' Part-IX.

SCHEDULE "A" PART -X (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col 5 signifies this fact only.

M&L for Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes etc. for area filling/ forming embankments including raising of original ground level(any height from OGL) or lowering by approved earth and including earth spreading in layers not exc 30cm thick each layer, watering, compaction with 8 tone to 12 tone power roller and finished to required size and shape etc, any high from EGL.

Material and labour for construction of brick masonry valve pit of size 900 x 900 x 900mm (internal size) with mild steel sheet cover 3mm thick and MS frame of angle iron of size 40x40x 6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including excavation and earth work,150mm thick PCC (1:4:8) type D-2 as in foundation,brick work in cement mortar (1:6), locking arrangement, and all inner sides of pit shall be plastered 15mm thick in cement mortar (1:4) and coping in PCC (1:2:4) type B-1 over brick wall complete.

Supply and fixing LED tube light batten box type made of CRCA sheet with decorative end caps including one single LED tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling with warranty 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver, LDR sersor fdor autimatic switch ON/ OFF of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.0 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

S & F Wall fans completewith blades, electronic regulator and accessories, 230V, 400mm sweep, Five star rated complete all as specified & directed.

S & F for energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for high bay light fitting luminaire with high power LEDs as light source and electronic driver of capacity 100 Watts with pre wired and necessary mounting arraangments and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long to required shape with clamps, nut bolts complete all as specified & directed.

Supply ,fabrication, installation and testing of LT out door type factory made CPRI Approved , junction box of size 900mmX600mmX400mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5mm vertical frame and legs with mild steel flat iron 25X5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of size 0.80m X 0.6m X 0.90m depth (0.30m below ground level and 0.60m above ground level ) and connections of all outgoing / incomming existing cable of any size drawing / digging out cable from loops in trenches inclusive of necessary excavation and earthwork as required and relaying the cables including the following fitment accessories all complete as specified and as directed. (a) Alluminium bus bar of size 50 mm X 6 mm X 400mm long wrapped with PVC sleeves with maintained the colour code and provision of making holes as required with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos. (b) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.

Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast aluminium housing with toughened glass and individual high lumen LED with secondary optics of capacity 70/72 Watt with minimum 120 Lm/watt, 240 volts AC 50 Hz , BIS Mark potted Driver IP 66 protection including 1.2 mtr long 40 mm dia GI pipe bracket including five years on site warranty from manufacturer complete all as specified and directed. Make: Crompton, Cat No:TRP409-70-30SL-GL-NSG or equivalent.

Supply and fixing pole mounted thermo plastic junction box/bus bar chamber for loop IN/OUT connection of street light cable of size 295x195x100 mm high heat distoration temperature, non-fusing , shockproff, rustproof, 100 % weatherproof, fire retardant- class FV-O as per IS 11731 Part-II and suitable locking arragement with three phase and neutral aluminium busbar of size 20X3 mm of length 170 mm wrapped with PVC sleeves with maintained the colour code, MCB DIn rail channel for mouting of one no 6 to 13 Amp MCB SP and provision of making holes with GI nuts, bolts & washers for cable connections mounted on non hygroscopic insulators with nuts & bolts at both ends of busbar and fixed on pole steel/PCC with suitable two nos flat iron clamp 25x4 mm with nuts and bolts (duly painted with two coats of aluminium paint over a coat of red oxide primer) complete all as specified and as directed.complete all as specified and directed.

Supply and fixing PVC Sheathed multi stranded unarmoured copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) of size 1.5 Sqmm 3 Core (Nominal Area) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed.

Supply and erecting steel swaged tubular pole, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints, type 410-SP-31 (9 meter long) with swan neck type bracket 1.4 mtrs long decorative arms 40 mm dia complete. (Note Excavation & Earth work and PCC foundation/base shall be measured and paid separately under relevant items of this BoQ).

Supply,laying & fixing double wall corrugated (DWC) PVC pipes of size 63 mm outer dia and 50 mm inner dia made of high density polythyline (HDPE) conforming to IS 16205 (Part-24) including all type of joints, Sockets, Elbows, bends and End caps etc.. complete all as specified and directed.

S & F LT heat shrinkable type indoor/outdoor end termination cable jointing kit with jointing material and accessories suitable for 1100 volt (earthed) grade 3 1/2 core XLPE, armoured, AI conductor cable of size 400 Sqmm, complete all as specified and directed.

S & F LT heat shrinkable type indoor/outdoor end termination cable jointing kit with jointing material and accessories suitable for 1100 volt (earthed) grade 3 1/2 core XLPE, armoured, AI conductor cable of size 25 Sqmm, complete all as specified and directed.

Supply,installation, commissioning and testing Compost Plant 80 mm ( 3 CuM per Hour + 20%) Complete set consists of Feeder, Trommel Screen 80 mm, conveyors &control panel along with intermediate hopper & sprouts inclusive of Feeder conveyor not less than ( 0.8 mtr wide x 8 mtr long), Trommel Screen 80 mm not less than 1.2 mtr dia shell x 3.5 mtr long, Oversize sorting conveyor not less than 0.8 mtr wide and 12 mtr long. Electrical control panel with MCCB/MCB and control cable for 15HP; Interconnecting Hoppers & spouts complete all as specified and directed by Engineer in charge.

Supply,installation, commissioning and testing Compost Plant 35/5mm ( 1 CuM Per Hour + 20% ) Complete set consists of Feeder , Trommel Screen 35/5 mm , Conveyors & control panel along with intermediate hopper & Spouts - inclusive of Feeder conveyor not less than 0.6 mtr wide x 8 mtr long, trommel screen 35/5 mtr not less than 1.4 mtr dia shell x 3.5 m long, Electrical control Panel with MCCB/MCB and control cable for 15 HP), interconnnecting hoppers and spouts complete all as specified and directed by Engineer in charge.

Supply,installation, commission and testing In-Vessel composter with treatment capacity of 3 Tonnes per day having operational ability to acccomodate 3-4 batches per day 4 hours each with feeder conveyor, inbuild shredder, composter with Air Blower, Discharge conveyor, complete set up with electrical control panel with MCCB/MCB and control cable complete all as specified and directed by Engineer in charge.

Supply,installation, commission and testing Shredder unit for shredding of oversized waste for dry waste having capacity 0.5 Tonnes per hour with electrical control panel with MCCB/MCB complete all as specified and directed by Engineer in charge.

Supply,installation, commission and testing Baler unit for shredding of oversized waste for dry waste having capacity 0.5 Tonnes per hour with electrical control panel with MCCB/MCB and control cable complete all as specified and directed by Engineer in charge.

Supply and fixing kill waste unit 100 Kg/hr capacity with all standard accessories including, installation and commissioning complete all as specified and directed by Engr-in-Charge. It shall comprises of the following:- (a) Combustion Chamber build specifications (i) Material: Non Corrosive mild carbon steel of IS2062- GRADE B category Cylindrical Chamber as specified by BIS with Seamless Internal Pipe Manufactured by Jindal Steel/ Equivalent with Nano Technology Based space craft surface Paint. (ii) Dimension: Dia: 900mm, height; 1000mm, thickness: 8mm (Cylindrical part only. Upper and bottom conical area not included) (iii) Thermal insulation: (a) Inner phase: High quality Imported Fire Cement. Concrete (ARHEAT-K)/ Refractory FIRE BRICKS laid with primer Accoset 50 fine Refractory Cement. (b) Outer phase: With 50mm thick ceramic wool of Morgan Cerablanket 1260 C (Density – 64kg/m3). (c) Protected with 1.0mm thick aluminium plate of HINDALCO (22 gauge) with Black Powder Coating. (d) Upper conical area made of mild steel plate of 6mm thickness and height 600mm, lined inside with imported fire cement concrete (thermally treated). (iv) Erection: Erected upon four legs made of high quality TATA steel/ Equivalent, pipe of dia. 100mm and thickness 8mm scheduled 40 seamless pipes at 1000mm above ground level. (v) Other Features: waste loading door, cleaning door, peep hole, ash chamber with door. (vi) Volume: 0.99 cubic metre. (b) Chimney (i) Material: STAINLESS STEEL PIPE GR. 304 (ii) Dimension: Dia: 200mm, Thick: 8mm/SS SCH 10S (iii) Effective Height: 20m from ground level (Chimney only) (c) Pollution Control Device 100Kg/hour with pollution monitoring system (i) Description: Multi- level pollution control water double scrubbing system, with depressurised water saving technology. Consumption- 1.6 Liters/ Min. (ii) Material: non- Corrosive mild carbon steel of IS 2062- GRADE B category Cylindrical Chamber as specified by BIS, Manufactured by Jindal Steel/ Equivalent- Thickness: 6mm. (iii) Erection: Erected upon four legs made of structural steel of make TATA/ JINDAL/ Equivalent Brand of dia. 2” and thickness 5mm. (iv) Material used: Flanges - Type- E-Size-5'’, 8'’, 10" Coupling - Type- Schedule 40- Size - 2” Inlet Water Pipe - Type- ‘C’ Class- Brand- TATA/ JINDAL/ Equivalent- Size- ½” Discharge Water Pipe - Type- ‘C’ Class- Brand- TATA/ JINDAL/ Equivalent- Size- 2” (v) PCMS: Outdoor Monitoring Device: Features: (i) Advanced Sensors: Measures -PM2.5, PM10, SO2, NO2, CO2, Temp, Humidity. (ii) 7 Segment display of 1X1 foot - Displayed Parameters:- PM2.5, PM10, SO2, NO2, CO2. (iii) Access air pollution data on web with 1 year subscription.

Please Enable Macros to View BoQ information