8315 SPECIAL REPAIRS TO OTM ACCN BLOCK No. NP 28-29 (A) MT PERS LINE AND TRG STORES AT AICTS PUNE UNDER GE SOUTH PUNE

Amount

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating 150 gsm GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating 150 gsm GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerbs or mud stops and similar locations, rounded or chamfered on edges incl necessary form work required complete all as specified

Dismantling ceiling/boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zinc chrome complete all as specified.

M&L for preparation of old painted steel surfaces exe 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP 20048 (b) Glazing clips 19352

Taking down and Refixing shutter of any discription exc 1 sqm n exc 2 sqm in same opening complete all as specified and directed.

Taking down chowkats or frames of wooden / steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down cement plaster from walls, ceiling including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified.

M&L for rendering 15mm thick in ready mix in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and as directed. (Note : WPC shall be measured and paid seperately)

Supply only integral water proofing compound complete all as specified and as directed.

M&L for rendering 15mm thick in ready mix cement plaster on block/concrete surfaces in CM(1:6) on irregular faces of walls using sagol finish complete all as specified and as directed.

M&L for preparation of new surfaces and providing two coats of weather proof exterior emulsion paint on walls complete all as specified and directed.

M&L for two coats of OBD on walls over a coat alkali resistance primer including preparation of new plaster surfaces with 1 mm thick wall care putty/wall putty surfaces complete all as specified and as directed.

M&L for two coats of OBD on walls over a coat alkali resistance primer including preparation of old plaster surfaces of wall surfaces with 1 mm thick wall care putty complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for coloured Vitrified Ceramic tiles of size 600x600x8-10mm thick (square/ rectangular) polished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Granite slab, 18 to 20 mm thick of approved colour, laying in design pattern using approved colour granite slab strips all as directed by Engr-in-Charge, laid bedded & jointed in neat cement slurry and pointed in white/coloured cement to match the shade of slab, laid over and including 20 mm thick, screed bed in CM 1:6 including rubbing and polishing complete as in floors complete all as specified and as directed.

S & F pressed steel frames for doors with one & more rebates incl necessary fixing lugs, hinges, lock strike plate etc as specified size of frame 125 x 60mm incl MS hold fast PCC bedblock (1:2:4) type B1 for hold fast and cement concrete 1:3:6 type C1 (12.5mm graded stone agg) for filling in MS frame complete all as specified and as directed.

S & F 35mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both side including 3mm thick, 1st Class HW (TW) beading all around on edging all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 300mm aluminium anodised Sliding door bolt of extruded section complete all as specified and as directed.

S&F 100mm size Steel butt hinges ,medium weight, cold rolled complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for 75 mm thick PCC (1:3:6) type C-2 (40 mm graded stone aggregate) as in plinth protection with sacher drain etc complete all as specified and as directed.

S&F in repairs Vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest excluding flushing cistern and flush pipe but including provn of lime concerete bedding complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repair 15mm bore stop valve brass chromium plated, fancy type with long shank and cup (concealed type) fixed to pipe complete all as specified and as directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm bore complete all as specified and as directed.

S&F oval shaped coloured vitreous china WHB of overall 600mm size including 32mm CP waste coupling, PVC waste pipe etc complete including Pillar cock long neck with aerator CAT No CON -021KN of Make - Jaquar or of equivalent make specified hereinafter complete all as specified and directed.

M & L for GI tubing for the following size of bore, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-In-Charge.

15mm bore

20 mm bore

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

M&L for PVC (SWR) gully trap 125/110mm with graring, setting and jointing with solvent cement complete all as specified and as directed.

S & F in repairs, following brass CP toilet fittings conforming to CAT No. as mentioned of make "Jaquar" or of equivalent make specified here-in-after:-

Bib Cock CAT No. CHR-3037 with wall flange

Soap dish CAT No. CHR-7733

Towel ring square CAT No. CHR-7721

S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc complete as directed by Engr-in-Charge.

M&L for joint free Glazed ceramic colour tiles 600 x 300mm, 7 to 8 mm thick in walls set and jointed in neat cement slurry incl backing coat in CM 1:4 including 10 mm thick and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free non skid ceramic colour tiles 7 to 8 mm thick (square/rectengular ) area of each tiles exc 0.11 sqm but n exc 0.18 sqm in floors and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all fittings and fixture all as specified in SSR Part 1 capacity 1000 litres incl PTMT float valve with PVC ball 20mm bore of pipe complete all as specified and as directed.

M & L for hand cut Kota stone slab 20 to 25 mm thick over and including 20mm cement screed bed in (1:6) laid and jointed with grey cement slurry mixed with pigments to match with the slab as in floor including rubbing and mirror polishing complete etc complete all as specified and directed.

M & L for kota stone slab skirting/Dado 20 to 25 mm thick in wall including 10mm thick CM (1:4) backing coat set and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing and polishing complete all as specified and as directed.

M&L for polishing of kota stone surfaces of old surface by picking, sweeping, clean and washing with machine incl necessary chemicals etc complete all as speicified and directed

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down unserviceable sub main wiring of any size and making good the disturbed surfaces complete all as specified and as directed.

Taking down carefully main switch/MCB DB's of any make and type including teakwood board etc complete and making good the disturbed surfaces complete all as specified and as directed.

M & L for Point wiring any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, (FR) ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly concealed in wall, painted with two coats of anti corrosive paint over a coat of red oxide primer, internally, covered with plastic laminated sheet suitable for switches, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified for the following:-

One light/fan point controlled by one switch and regulator

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board.

One 3 pin 5 amps socket outlet point on same board with other switches

All as per item No. 56.00 above for modular socket power point but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S&F switch piano type flush, single pole, one way, 5Amp 230 Volt complete all as specified and as directed.

S & F socket outlet 5 pin,5 Amp 230Volts, flush type complete all as specified and directed.

S & F for celling rose 2/3 terminals, PVC/polycarbonate, isolated body ISI marked complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal, complete all as specified and directed.

S & F ceiling fan regulator, electronic step type, delux, suitable for fan on the existing phenolic laminated sheet etc. complete all as specified and as directed.

Supplying ,Laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminium conductor cable of size 25 sq mm,4 core, 1100 volts grade ,laid in trenches/ducts, floors, fixed to pole/ walls etc. complete all as specified and directed by the Engineer-in-charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix street light fittings Pressure die cast aluminium housing, IP 66 Proptection, heat resistance toughened glass with frame LED street light luminaries complete with driver and all standard accessories of capacity 25 Watt LED including necessary fixing arrengements with GI Pipe 25mm and MS clamp 02 Nos, necessary connection etc all as specified and directed by Engineer-in-charge.

Supply and fix LED mirror light fitting LINNET 2' long wall mounted type high efficiendcy 1 x 14 watt with high output diffuser and all fixing arrangements conforming to Crompton cat part No. LCL-14- CDL or of equivalent in Havells/Wipro/Bajaj

S & F Sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps,10 KA breaking capacity,'C' series,240 V. complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note :- Two runs of 4.0 sqmm cable,one run of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit all as specified and as directed.)

M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr in deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level including connecting GI earth wire 4mm dia by GI nut, bolt, washers all as shown in electrical plate No. 3 of SSR Part I of 2009 including funnel for watering, PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in pit / chamber, RCC 1:2:4 type B0 using 12.5mm graded stone aggregates and 6mm dia mild steel bars at 100mm c/c as in chamber cover, charcoal, salt etc complete including excavation and earth work in any strata, test point and testing on completion including filling up the earth pit with black cotton soil for best result and removal of excavated material from site all as specified and directed by Engineer-in-charge. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 12 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing item.

Supply and Fix MCCB 100 Amps, 16 KA, 4 Pole,415V, electronic protection unit complete all as specified and as directed.

S&F MCB DB, SPN, sheet metal enclosure, 12 way with 200 amps rated bus bar double door, with locking arrangement fixed in wall including cutting & good to disturbed surfaces complete all as specified and directed.

S&F MCB SP 6-32 Amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 40 amps,10KA, 240V,'C' series complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified. Make- Bajaj/Havells/Crompton

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, Hot and Cold water connection pipe, Anchor Fastener as required for fixing etc complete all as specified.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in Soft/Loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

Material and labour for Reinforced concrete pipes, class NP2 with one collar per length of pipe of dia 100mm, half round (02 Nos for top & bottom) complete all as specified and as directed.

Supply and lay in trenches for cable protection G I Tubing light grade complete with all accessories etc of 50 mm bore size complete all as specified and as directed.

Gauri Associates

MONA ASSOCIATES

M/s.BAJRANG CONSTRUCTION

M/s Omkar Associates

SHINDE DHEERAJKUMAR SIDRAM

Takshashila electricals

ANIL CONSTRUCTION CO.

Aishwarya Constructions

L.K.R.TIWARI CONSTRUCTION