CONSTRUCTION OF COMMUNITY HALL CUM WORK SHED WITH TOILET AND WATER SUPPLY FOR BIHAR MAHADALIT VIKAS MISSION, IN SAURGAON PANCHAYAT AT- SAURGAON MAHADALIT TOLA OF KURSAKANTA BLOCK UNDER ARARIA DISTRICT.(MOUZA-SAURGAON THANA NO-39 KHATA NO - 441, KHERSA NO - 259 )

All kinds of soil.

All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead.

Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete.

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

1:3:6(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Weather shade, Chajjas, corbels, etc. including edges.

Thermo-Mechanically Treated bars TMTC-500- 8 mm dia to 16 mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Cement mortar 1:6(1 cement:6 coarse sand)

Half brick masonry with bricks of class designation 100A in foundations and plinth in :Extra for half Brick masonry in superstructure above pinth level upto floor V level

Providing wood work in frames of doors,windows, clerestory windows and other frames, wrought framed and fixed in position

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge.30 mm thick.Windows

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces

Providing and fixing 1 mm thick M.S. sheet door with frame of40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete jncluding applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece.

Fixed to steel windows by welding

Providing and fixing bright finished brass 100mm mortice latch and lock with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).

Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one ;pcf at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

G.I pipes 40mm nominal bore(class B)

40 mm thick with 20 mm nominal size stone aggregate

18 mm thick

Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brow laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

1:6(1 cement: 6 coarse sand)

1:6(1 cement: 6 course sand)

1:4( 1 cement: 4 coarse sand)

12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement

New work (three or more coats)

Apply one coat of cement primer of approved brand and manufactureApply one coat of cement primer of approved brand and manufacture

Distempering with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade : New steel work (two or more coats)

Letter Writing for scheme summary on wall

Cement

15 mm dia

20 mm dia

25 mm dia

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end).25 mm dia -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931

Providing and fixing C.P brass stop cock of approved quality conforming to IS:8931

White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.

110mm diameter

Single Tee with door - 110 mm dia -

Bend 87.5' 110mm bend

Supplying shallow well Hand pump…(Singur)

Supplying 40mm dia Light quality G.I. pipe comforming to relevant I.S.I.

Supplying 40mm dia Blue casing P.V.C. pipe of approved quality with shoe plug.

Supplying 40mmx2mtr Long P.V.C. ribbed strainer of approved quality with shoe plug as per relevent I.S.I.

Providing all tools and labours for fitting and fixing hand pumps no 6 etc. all complete inciuding leather flap valve and bucket's nut if necessary all complete job as per specification and direction of E/I.

Developing and t Testing of T/W till the discharge is free from sand one item all complete job as per specification and direction of E/I.

Tranportation cost of materials, tools and equipment from store to work site and carrying back the surplus material if any all complete job as per specification and direction of E/I.

Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with piano type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required. Group- A

Supplying and fixing suitable size GI/PVC box on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type connection painting etc. as required.

Supplying and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type on the existing switch box including connections etc. as required.

S/F/F 6 amps. 5 pin socket outlet on the existingswitch box/cover including connection etc.as reqd.

S/F/F 15/16 amps one way switch piano type on the existing switch box/cover including connection as reqd.

S/F/F 16 amps. 5 pin socket outlet on the existingswitch box/cover including connection etc.as reqd.

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (Circuit wiiring)

2 x 2.5 sq. mm + 1 x 2.5 sq. mm

Supplying and fixing batten / angle holder including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable etc. as required.

Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 15 watt LED lamp

Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc. as required ( But without MCB / RCCB / Isolator ).

6 Amp. To 32 Amp. SP MCB 240 Volt

32 Amp SPN MCB 240 Volt

Providing and fixing following capacity double pole /four pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board, including drilling holes in metal panel, making connections etc. as required.6 Amp. To 32 Amp

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as req u ired.

Supplying and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rods of stanard length ( upto 30 cm) with 1.5 sq. mm FR PVC insulated insulated copper conductor etc as required.