Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC RAMA PARK A 121 BLOCK A UTTAM NAGAR WEST DELHI DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹43.7 L+₹1.9 L (4.58%)Rejected-Finance 112 AMBALA ROAD NARAINGARH AMBALA 134203 | NARAINGARH | AMBALA | HARYANA | 134203 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹44.3 L+₹2.6 L (6.12%)Rejected-Finance H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹44.5 L+₹2.8 L (6.60%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹48.4 L+₹6.7 L (15.9%)Rejected-Finance 127 OLD NAGAR PALIKA BUNGLOW NO 60 NEEMUCH MP NEEMUCH MADHYA PRADESH 458441 INDIA | NEEMUCH | MADHYA PRADESH | 458441 | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
PROVN OF 12 X SINGLE LIVING OR ACCN AND STORE ROOM AT WARDEC UNDER AGE B/R-I AND AGE E/M OF GE (SOUTH) DELHI CANTT-10
2023_MES_592755_1
GE/DS-10/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE South Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE South Delhi Cantt
₹87,300
Yes
19 Jun 2023
2 May 2023
1 Jun 2023
2 May 2023
30 May 2023
16 May 2023
Amount
Surface dressing n.exc. 15 cm deep complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and as directed.
Excavating in over areas, exc 1.5 m and n exc 3 m in depth; for foundation, etc. and getting out etc in soft /loose soil complete all as specified and as directed.
M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in foundation and mass concrete complete all as specified and as directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions. Square,Rectangle or Polygon complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) in foundation, including rafts, footings, foundation beams, plinthbeams, bases for columns, etc, basement slab, under rimmed piles and mass concrete complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) slabs supported on walls, beams and column in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) beams, cantilevers, bressumers, lintel over 1.5 mt span complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) column, pillars, piers, posts and struts complete all as specified and as directed.
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm Soft soil/loose soil complete all as specified and as directed.
M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
S&F TMT bars 10 mm dia and over, cut to length, bent to shape requied, including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips quality conforming to TMT bars complete all as specified and as directed.
S&F TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and as directed.
M&L for 10 mm thick cement plaster in C:M 1:6 finished even and smooth to brick wall/concrete surfaces complete all as specified and as directed.
M&L for 15 mm thk cement plaster in C:M 1:4 finished even and smooth to brick wall/concrete surfaces complete all as specified and as directed.
M&L for 5 mm th rendering in cm (1:3) over soffit and sides of RCC column, slab, landing, waist slab, chajja, roof projection etc. complete all as specified and as directed.
M&L for two coat of Distempering to newly plastered surfaces of walls/concrete distemper oil emulsion including preparation of surfaces over a coat of primer with alkali resistant priming paint etc complete all as specified and as directed.
M&L for two coat of Distempering to newly plastered surfaces of ceiling with distemper oil emulsion including prepration of surfaces over a coat of primer with alkali resistant priming paint etc. complete all as specified and as directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.
M&L for two coats of synthetic enamel ordinary tinted paint over one coat of pink primer on new wooden surface including preperation of surfaces complete all as specified and as directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with size 600X600 mm complete all as specified and as directed.
M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match (Size - 300x300) complete all as specified and as directed.
M&L for glazed coloured, joint free ceramic tiles in vertical surface of size 450X300X7 mm thick, over a 10mm thick cement plaaster set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. complete all as specified and as directed.
M&L for cement concrete type B-1 1:2:4 (20mm graded aggregate) for plinth protection etc. complete all as specified and as directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
S&F 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
S&F powder coated aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F 100 mm size butt hinges medium weight stainless steel complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section and fixed complete all as specified and as directed.
S&F aluminium handles , 150 mm size, Fabricated type complete all as specified and as directed.
S&F powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.
S&F Aluminium anodised door with shutter , chowkats /frame made with Aluminium section of size 100 x 44 x 2 mm thick vertical styles of shutters made with sections 84 x 44 x 2 mm thick and top / middle / bottom rail of shutter with sections 112 x 44 x 2mm thick including 5 mm thick tinted glass panes/ 12mm partical board as per directed by Engr-in- charge, inserted including necessary fixing arrangement, jointing cleats, glazing clips, rubber packing aluminium anodised beading screw sets floor hinges tower bolts 200 mm size, mortice lock 100 mm size 4 lever, round handles etc. fitted to shutter and frames fixed in positon including hold fast of size 25 x 3 mm flat, 150 mm long, 6 nos in each frame including cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150 x 150 x 150 mm each and match the existing surfaces complete all as specified and as directed.
S&F Vitreous China, semi-pedestal pattern (Anglo-Indian) Type Joint between fluslhing pipe and socket of W.C. pan with seat cover complete incl fixing of flush pipe etc. complete all as specified and as directed.
S&F low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve complete all as specified and as directed.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of limeconcrete bedding, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor complete all as specified and as directed.
S&F Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
S&F chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour complete all as specified and as directed.
S&F Vitreous Cliina wash basin, wliile, flat back, size 580x450irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F two way angle bib cock cromium plated fancy type 15 mm bore /size complete all as specified and as directed.
S&F Soap dish, cromium plated , any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
M&L PVC 75mm bore floor trap, with grating including jointing solvent cement complete all as specified and as directed.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm dia pipe complete all as specified and as directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm dia pipe complete all as specified and as directed.
S&F galvanised iron pipe etc. with all fittings and fixed complete to walls and ceilings or laid in floors etc. medium grade 20 mm dia pipe complete all as specified and as directed.
S&F galvanised iron pipe etc. with all fitting and fixed complete to walls and ceilings or laid in floors etc. medium grade 15 mm dia pipe complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for WC outlet pipe of 110 mm dia complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for bath outlet pipe of 75 mm dia complete all as specified and as directed.
S&F Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of 2000 lit tank complete all as specified and as directed.
M&L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified and as directed.
M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid seperately.
M&L for Water Proofing compound complete all as specified and as directed.
M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-
(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.
(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).
(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.
(d) Preperation of surfaces and applying two coats of aluminium paint on top of roof surfaces.
Make of APP: "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.
Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.
M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.
M&L for 18 mm thick wood plastic composites (WPC) board for Cub board, 100% solid with density not less than 650 Kg per cubic meter, one side wood grain finished laminated for exposed/external surface, fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and as directed. Note : (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra. (c) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall be included for the same
S&F CP clip on hinges (Inset) complete all as specified and as directed.
S&F 125 SS handle, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete all as specified and as directed.
S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.
Surface exacavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block (PU molded ) of 60 mm thickness any shape and size and color, M-35 Grade with grey cement and pigments including glossy cotting ultra finish complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, bed blocks, bands and similar work including weathering rounded or chamferred angles and throating including necessary form work required complete all as specified and as directed.
Excavation in trenches n exc 1.50 m wide and n exc 1.50 m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.
S&F 100 mm bore sail glazed stoneware drain pipes laid in trenches and jointed as specified and connect to existing manholes including complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for sewage pipe 100mm bore complete all as specified and as directed.
M&L for brick work using old size bricks of class designation 10, built in cement mortar (1:4), straight or curved on plan, exc 6 metre mean radius complete all as specified and as directed.
S&F SFRC manhole cover size (1200 X 600 x 70 )mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes:- (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole. (c) Or equivalent as approved by GE”
M&L for extra for forming fair furnished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds,mitred/stopped ends etc complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (1:3) complete all a specified and as directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.
S&F aluminium windows (Double track) / ventilator powder coated of section 85.00 mm X 31.75mm X 1.50mm thick shutter of section 19X40X1.5 mm with rubber gasket beading and locking arrangement etc complete all as specified and as directed. Note - Glazing/wire mesh shall be including in the unit rate.
M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through suitable concealed PVC conduit including modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified and as directed. Note :- 1. The Rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 and same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash complete. One light /fan/Bell point/security light controlled by one way switch
All as per Srl item No.89 above, but One 3 pin socket outlet 5 amps point independent board
All as per Srl item No.89 above, but One 3 pin socket outlet 5 amps on same board
All as per Srl item No.89 above, but for one socket outlet 15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.
S&F Switch modular type, 1Module, 6 Amps one way complete all as specified and as directed.
S&F Socket outlet modular type 2M, 2/3 pin, 6 Amp complete all as specified and as directed.
S&F outlet modular type 2M, 2/3 pin, 16 Amp complete all as specified and as directed.
S&F Switch modular type 1M, 16 Amp complete all as specified and as directed.
S&F ceiling rose surface 65x25mm two to three terminals complete all as specified and as directed.
S&F Wall mounted LED Integrated Batten 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED battern-Integrated complete all as specified and as directed.
S&F Wall mounted LED Integrated Batten 10 Watt-2 Ft White, indoor decorative PVC extruded T5 LED battern-integrated type complete all as specified and as directed.
S&F LED street light fitting 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including fabrication of GI bracket 25mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut, bolts, & washers etc. complete all as specified and as directed.
S&F Electronic fan regulator, modular type 2M, 8 steps complete all as specified and as directed.
S&F BLDC (Brushless DIrect Current) Ceiling fan 1200mm Sweep operated through regulator not less than 350 RPM, not less than Air delivery 215 cum/minute, voltage 220V, hihg air follow with silence operation, having full copper winding & ribbed blade 3 Nos A/M blades. The BLDC motor fan shall have 100% rust free blade. The fan shall be BEE 5 star rating and compliant with IS-374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and as directed.
S&F water storage heater 25 ltr capacity, 5 Star rated , vertical type, metal body, glass line, vertical type, AC, Single Phase electric, 230 Volt, complete with heating element, thermostat, 3 core lead, Plug top, safety valve, including electric and water connection with suitable nut, bolts & washers and making good to disturbed surface complete all as specified and as directed.
S&F PVC connection with brass nipple 15 mm x 600 mm long, stainless steel with ISI marked suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and as directed.
S&F 15mm bore pipe medium grade galvlanised iron pipe with all fitting fixed in wall/floor and making connections and making good the disturbed surface to match with the existing specifications complete all as specified and as directed.
S&F bib tap 15mm bore of cast coper alloy CP fancy type screwed to iron pipe and fixed complete all as specified and as directed.
S&F stopcock concealed Angle type 15mm dia cast copper alloy CP fancy type screwed for iron pipe and fixed complete all as specified and as directed.
M&L for opening of hole through out the wall as suitable for exhaust fan of size 300mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making food the disturbed surface and all as per site requirement complete all as specified and as directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.
S&F metal body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with complete all as specified and as directed.
S&F MCB DB SPN 12 Way with metal double door flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and as directed.
S&F MCB DB SPN 4 Way with metal double door flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and as directed.
S&F MCB SPN 'B' curve 40/63 Amps, 240 Volts, 10 KA including electrical connection with suitable size of thimbles complete all as specified and as directed.
S&F MCB SP 'B' curve 06 to 32 Amps, 240 Volts, 10 KA including electrical connection with suitable size of thimbles complete all as specified and as directed.
M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete complete all as specified and as directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded ,galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 10 sqmm, 2 core complete all as specified and as directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded ,galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 16 sqmm, 2 core complete all as specified and as directed.
Supply and laying old size brick covering common burnt clay building bricks sub class 'B' designation 75 of size 230x115x75mm complete all as specified and as directed.
Supplying and laying G.I. tubing, light grade for encasing cables for mechanical protection, laid under plinth/ floors/ roads/ paths/ culverts or fixed on walls or concealed in walls or along the steel poles incl bends/clamps and all accessories size of 50 mm bore complete all as specified and as directed.
Boring holes under road pavement by bocky manually in any type of soil upto 50 mm bore complete all as specified and as directed.
M&L for 25mm galvanised pipe medium class, in complete including fitting all complete all as specified and as directed.
S&F Valve, stop, screwed, 25mm (1") dia pipe complete all as specified and as directed.
M&L for cutting existing 50/80/100mm dia GI pipe and threading inserting TEE 50/80/100 x 50/80/100 x 25 mm including all fittings such as union, socket etc making leakage proof joints using gasket etc. complete all as specified and as directed.
J S CONSTRUCTION CO
P R Constructions
MAA BHAWANI CONSTRUCTION
JINDAL ENTERPRISES
M/S Parmod Johar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .