Repair/cleaning of sewage system, boundary wall, path/ hardstanding, garbage bin, fencing drain and allied works in Md and OTM Accn at ML Line, PP Line and MH under AGE B/R-I at City Area Alwar

Amount

Demolition of cement concrete (un-reinforced) in ground floor and paving. n. exc. 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as specified& directed

Demolition of cement concrete (un-reinforced) in ground floor and paving. exc. 15 cm thick above ground level & removal of rubbish material all as specified & directed

M&L for 100 mm thick PCC 1:4:8 type D -2 using 40 mm graded aggregate as in sub base of path/hardstanding complete all as specified & directed

M&L 60mm thick machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 , M-35 Grade and over 25mm thick sand filling complete all as specified and as directed

M&L 60mm thick machine pressed precast concrete rubberised moulded colourful interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006, M-35 Grade and over 25mm thick sand filling complete all as specified and as directed

M&L for 40 mm thick PCC 1:2:4 type B -1 using 20 mm crushed graded aggregate as in flooring complete all as specified & directed

S&F plastic dividing strips, 1.5 mm thick and 38mm width inserting in position conform to position complete all as specified

Dismanlting of kerb stone including cement bedding & removed off rubble.

M&L for PCC Type D2 1:4:8 (40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed

M&L Precast cement concrete solid block factory made as in Kerb stone in PCC 1:2:4 type B-1 using (20 mm graded crushed stone aggregates) set in CM 1:6 (size of precast concrete block complete all as specified & directed

M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded crushed stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed

M&L coloured rubberized moulded Chequered cement concrete tiles 30cmx30cmx25mm thick, set,jointed and pointed in neat cement slurry in floors over and incl 15mm thick cement screeding in CM 1:6. Complete all as specified and directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified& directed

M&L non skid ceramic tiles colored 300x300x7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed

Dismantling floor,hearth or wall tiling incl cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed

M&L Glazed ceramic tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S&F in repair white vitreous china wash hand basin 'Flat back' of size 550x400mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as directed

S&F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making good to floor complete all as specified & directed

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) alongwith preader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.

Taking down cement plaster any description on brick or stone walls etc.

M&L for rendering 15mm thick in CM 1:4 on stone/brick wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound all as specified.

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of 1 mm thick wall care putty of approved tint complete all as specified & directed

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified& directed

M&L preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with sub class B bricks, straight or curved on plan to any radius in old type brick thick walls built in CM in 1:4.

M&L for walling of random rubble,bedded and solidely hearted Uncoursed built in CM (1:6) complete all as specified and directed

All as per srl item No 36.00 above but except stone complete all as specified and directed. Note:- Old serviceable stone obtain from Srl item No. 32 shall be used.

Extra over stone walling for hammer dressed to face stores and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto course with maximum deprssion on face from straight adge held against the depressed surface on lime or sand stone not exc 20mm for rock faced.

M & L for providing cement concrete 1:2:4 type B-1 concrete, using 20mm graded stone aggregate as in water throughs, surface channels of drains and manhole benching including finishing the top of benching even and smooth using extra cement complete all as directed.

M&L for PCC (1:2:4) type B-0, using 20 mm graded crushed stone aggregate in coping complete all as specified

M&L Precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified& directed

M&L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar Set in cement mortar 1:4 (type B-0 1:2:4) 12.5mm agregate complete all as specified& directed

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed

Supply and fixing in repairs pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints all as specified.

S&F in repairs Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified including taking down existing pillar tap and removing the same to store

S&F bib tap cast copper alloy with crutch or butter fly handle 15mm bore fancy type chromium plated fixed in repair

S&F in repair 15mm bore Stop/angle valves,fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unionscomplete all as specified.

S&F in repair chromium plated health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.as approved by the GE.

Taking down Chowkatts or frames with shutters (without taking off shutters from the frame) n exc 1.5 sq.each & removing to store.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified & directed

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed

Cleaning of all blockages of Nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, 100 mm/75 mm dia CI pipe stacks upto 1st Manhole, CI/SGSW pipe between gully trap & 1st Manhole, CI Tee/Door bends etc to maintain internal sewage system in the area of AGE B/R - I (City area) with and including manual/pressure cleaning pump & flexible rods and other necessary equipments complete all as specified and directed by Engr-in-Charge. Note : (i) Contractor or his authorised representative collect such type of complaints from AGE B/R - I complaint cell at 8.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaint must be completed within 24 hours without any fail otherwise recovery shall be made double the market rate to the contractor.

Cleaning of Sewage line of 100mm bore from gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, all as specified & directed.

All as per description of serial item No. 57.0 here-in-before but sewage line of 150 mm bore and depth of sewage line upto 1.50 m.

Cleaning of septic tank of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the MD land, complete, all as directed.

Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required and directed

All as per description of serial item No.60 here-in-before but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed.

Demolition of reinforced cement concrete as in cover/slab of manhole/septic tank/soakage well all a specified & directed

M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate) for manhole/drain cover including placing and set in CM 1:4 all as specified

S&F for 50mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 3 ton /Sqm in square rectangular or Circular shape complete all as specified and directed

M & L mild steel (TMT bar) 6 to 8 mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.

M & L mild steel (TMT bar)10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.

M&L for use and waste of form work to soffits of suspended slabs such as beam, column, roof slab, floor slabs, landings and similar work, n.exc 200mm thick flat, rough finished surfaces of cencrete complete all as specified and directed.

M&L form wok to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed and directed.

Demolition and breaking up drain pipes 150 mm dia (salt glazed ware AC or reinforcement concrete set in cement mortar.

M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil complete

All as per srl item No 72.00 above exc 1.5 m deep and n.exc 3 m deep.

Returning filling in including spreading, levelling watering and well ramming in layers not exc. 25 cm using excavated soil.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Cutting is to existing manholes for new drains, for removing existing branch drain, making good to walling and rendering cutting out branch channel and making good benching (bore of pipe 150 mm).

S&F in repair 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling old u/s pipe complete all as specified

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified & directed

S&F in repair PVC (SWR) bends any radius 75 mm bore complete all as specified & directed

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified & directed

S&F in repairs MS grating CP 100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F PVC (SWR) vent cowl 110mm complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed

S&Fin repair PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed

M&L for sealing the sides of traps in bath/kitchen using Aqua TS of "Aquashield water proofing" incl cleaning the traps with suitable chemical to remove foreign material all as required & directed .

M&L for Reinforced Concrete pipes, class NP2, laid and jointed complete with collars bore in pipe in 300mm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for any work complete all as specified and directed

S&F Framed work such as iron doors or gates grills, gratings, etc.. with ends of barss houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work framed and hung asgates, including pintle hinges, stops, hand-made sliding bolts, etc.conforming to Fe.290 complete all as directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work, masonary etc. any section, including taking out embedded portion and making good disturbed ground

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil.

M&L cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) in foundation filling mass concrete for post holes etc complete all as specified and directed.

S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe -310-0

S&F mild steel bolt purpose made with hexagonal or square head one end screwed the other end or screwed both ends each screwed to be fuitte3d with washer and one hexagonal or square nuts exceeding 50mm and n exc 75 mm long dia of the shank 16 mm.

Fixing only chain link fencing including line wire any mesh size and type to any type of standards rails, straining bolts etc inlcluding provision of binding wire

Supply only chain link MS galvanised fencing any size or type weight n exc 4.00 Kg

S&F mild steel MS round bar 10 mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed)

Preparation of new steel surfaces of any description Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M/s Laxmi Enterprises (BID ID -3398246)

Hitesh Construction (BID ID -3400193)

shiva construction (BID ID -3400096)