SPECIAL REPAIRS TO BUILDING NO H 45 SURGICAL WARD OF MH AND CERTAIN REVENUE AND MINOR WORK UNDER GE WELLINGTON

Amount

Taking down PVC / wooden chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down PVC / wooden chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr all as specified and directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm each all as specified and directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer on both sides with lipping/ frame to match, complete all as specified and as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing as mentioned in SSR all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame made up of tubes shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as mentioned in SSR drawing all as specified and directed.

Anodised aluminium frame powder coated for doors, windows ventilators, with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

Anodised aluminium door shutters including powder coated, aluminium section weighing not less than 0.55Kg/mtr including necessary joining cleats, glazing cleaps, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screw, etc complete all as specified and directed. Note: Glass, wiremesh and particle board shall be measured and paid separately.

Anodised aluminium window/ ventilator shutters including powder coated, aluminium section weighing not less than 0.55kg/mtr including necessary joining cleats, glazing cleaps, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc complete all as specified and directed. Note: Glass, wiremesh and particle board shall be measured and paid separately.

Louvers type or fixed glass ventilators using 5mm thick frosted glass and following aluminium powder coated sections conforming to catalogue of JINDAL or of equivalent make and rubber beading etc all as specified and directed. (a) SP- 20048, (b) Glazing clips 19352. Note: The rate shall be inclusive of glass.

12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed in aluminium doors shutter frames work all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No.1 universal type sutable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed in repairs all as specified and directed.

Butt hinge, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) of 250 mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed.

Mild steel work as in hold fast conforming to Fe-290 Gde-165 all as specified and directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate over platform, bed blocks for hold fast, and like of any description, over 10mm in width or grith not otherwise described all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

All as per item No 22 hereinbefore but fixed in repairs all as specified and as directed.

Aluminium handles, cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed.

150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed in repairs complete all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

Kitchen and Cupboard Shutter / shelf/ partition/ cabinet care case of required sizes made out of DHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination . The 18 mm thick board shutter / cabinet care case finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Make : Action Tesa or equivalent Note:- Work to be carried out by manufacturers authorised workers.

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed. Make : EBCO or Equivalent

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed. Make : EBCO or Equivalent

Fancy type decorative draprey rod brass 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick/ stone or concrete surface complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Coloured Non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, on vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including15mm thick screed in cement mortar 1:4 complete all as specified and directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:4 complete all as specified and directed.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes, complete all as specified and directed.

Rendering 10mm thick cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed.

Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed

Rendering 15mm thick on fair faces of brick / concrete / RR masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces or stone masonry surfaces mixed with liquid water proofing compound, finished even and smooth without using extra cement including scaffolding as required complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound conforming to IS all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint (Anti Fungal) white or tinted over a coat of primer over a coat of external wall care putty 2-3mm thick smooth finish complete all as specified and directed.

Preparation of newly treated surfaces of walls and applying two coats of oil bound distember over a coat of wall care putty 2-3mm thick including primer complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying two coats of Oil Bound Distemper (washable) over a coat of primer (water thinable/ solvent thinable), over one coat of white wall care putty even and smooth complete all as specified and directed.

Complete removal of existing treatment of ceiling surfaces and applying two coats of Oil Bound Distemper (washable) over a coat of primer and over one coat of wall care putty even and smooth complete all as specified and directed.

Preparation/ removal of old treated of plastered/ stone / brick wall surfaces and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted complete all as specified and as directed. Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings.

Floor mounted coupled water closet of size 380x660x765mm with flushing cistern, with UV soft close seat cover, Hinges, fixing Accessories set including S trap including fixed in repairs complete all as specified and directed. Make: Cat No LYS-WHT-38751S & LYS-WHT-38201 of Jaquar or techno commercially equivalent

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Supply and fix in repairs table top basin of size 485x395x150mm including waste coupling and waste pipe complete all as specified and directed. Make: Cat No JDS-WHT-25909 of JAQUAR or techno commercially equivalent

Single lever basin mixer tall body, brass, chromium plated without pop up waste system and 450/600mm long braided hoses complete fixed in repairs all as specified and directed. Make : Jaquar or techno commercially equivalent

Long body bib tap fancy type Chormium plated fixed to 15mm dia in repairs,complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or equivalent

CP single lever exposed parts kit of Hi Flow Diverter consisting of operating lever, wall flange (with seals) & button spout including fixed in repairs complete all as specified and as directed. Make :- Cat No. KUP-35079KPM of Jaquar or equivalent

Concealed body for single lever high flow diverter with button assembly, cartridge sleeve (without exposed part) including fixed in repairs complete all as specified and as directed. Make :- Cat No. ALD-079 of Jaquar or equivalent

Spout with button attached for hand shower with wall flange including fixed in repairs complete all as specified and as directed. Make :- Cat No. SPJ-35463PM of Jaquar or equivalent

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 300 mm long and fixed in repairs complete all as specified and as directed. Make: JAQUAR or equivalent

Bib tap, 2 in 1 type brass chromium plated fancy type fixed with existing pipe 15mm bore and fixed in repairs complete all as specified and as directed. Make: Cat No CON-041KN of Jaquar or techno commercially equivalent

Soap dispenser, brass, chromium plated, with mettalic bottle complete fixed in repairs all as specified and as directed.

Supply and fix in repairs towel rack, brass, chromium plated, 600mm long with lower hangers as in bathroom complete all as specified and directed.

CP toilet paper roll holder complete fixed in repairs all as specified and as directed.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs all as specified and directed.

Angular stop cock with wall flange for 15mm dia of chorumium plated fancy type in repairs complete all as specified and directed. Make: Cat No CON-059KN of JAQUAR or Equivalent

Bib tap fancy type chromium plated fixed to 15mm bore complete including fixed in reapirs all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Soap dish complete fixed in repairs all as specified and directed. Make:Cat No.ACN-1131N of JAQUAR or equivalent

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Health Faucet with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer and fixed in repair all as specified and as directed

Supply and fix in repairs Chromium plated hand shower rose 120mm dia round shape multi flow with cascade effects rubit cleaning system complete all as specified and directed. Make: Cat No HSH-1731 of Jaquar or equivalent

Hand shower flexible tubes 12mm dia & 1.5m long with nuts complete and fixed in repairs all as specified and directed. Make: Cat No SHA-549D12 of Jaquar or equivalent

Supply and fix in repairs premium Chromium plated wall bracket for hand shower 35mm dia and 100mm long round shape complete all as specified and directed. Make: Cat No SHA-555 of Jaquar or equivalent

Taking down GI tubing 15mm bore medium grade and connections, all as specified and directed.

Taking down GI tubing 20mm bore medium grade and connections, all as specified and directed.

Supply, laying and testing steel water tubing 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed. Note: The rate inclusive of cutting grooves and making good for making concealed pipes.

Supply, laying and testing steel water tubing 20mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed. Note: The rate inclusive of cutting grooves and making good for making concealed pipes.

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 20mm dia (Minimum weight 25mm-455gms) complete all as specified and directed.

Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia all as specified and directed.

Dismantling PVC water tank exceeding 250 ltrs and not exceeding 500 Ltr capacity from existing position all as specified and as directed.

Rotational moulded polyethylene water storage tank of capacity 1000 Ltr (cylindrical vertical with closed top) three layers, hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed

Demolition and breaking up drain pipe of any description of any size complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) 110mm dia pipe single socketed in any length, with rubber ring joint fixed to walls with clamps complete all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

Stack clamps out of 50mm x 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

Demolition of cement concrete reinforced in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar work complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in cement mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

75mm thick plain Cement concrete, 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection and hard standing finish even and fair complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 100mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Dismantling of corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of Wrought Iron or Mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Dismantling of wall/ ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work all as specified and directed.

GI frame work for frame size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flages of 20mm and 30mm and web of 27mm fixed surrounding walls using Nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flages of 15mm each and web of 45mm suspended from soft at approx 900mm c/c with GI cleat and section not exceeding 1.2mtr length of 0.55mm thickness having kurb web of 50mm of and flanges of 26mm each with lips of 10.5mm fixed to intermediate channel with connection clips across the intermediate channel at 457mm c/c complete all as specified and directed.

12 mm thick Gypsum Board in ceiling fixed with screws as per manufacturers instructions all as specified and as directed.

Applying two coats of distemper oil emulsion on ceilings over priming surfaces with priming paint complete all as specified and directed.

10mm thick PVC insulation pannels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of aluminium / G.I / M/S as per specification and drawing all as specified and as directed.

Stainless steel (grade 304) railing / Hand rail made up of hollow tubes, channels, plates etc, including welding, grinding, buffing polishing and making curvature (whereve required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement all as specified and as directed. Note: For payment purpose only weight of SS member will be considered, excluding fixing accessories such as nuts, bolts, fasteners etc.

Grab bar vertical swing type of stainless steel including fixing accessories set complete all as manufactures instruction and all as specified and as directed. Make :- Jaquar or equivalent

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swannecks ect all as specified and as directed.

PVC (SWR) pipe 180mm bore as in half round gutters including fixing with mild steel clamps suitable for Galvalume Roof sheets/ AC sheets roof, complete all as specified and as directed.

PVC 180mm dia drop ends / stop end suitable for 180mm half round valley gutter complete all as specified and as directed.

PVC (SWR) 180mm dia bore pipe single socketed in any length, with rubber ring joint fixed to walls, complete all as specified and as directed.

PVC (SWR) bends any radius 180mm dia bore pipe all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, complete all as specified and directed

Removing excavated soil/ material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded aggregate for 150mm bore pipe all as specified and directed.

Salt Glazed stoneware drain pipes of 150mm internal dia, grade 'A' laid in trenches and jointed in cement mortar 1:1 mixed with spun yarn and testing complete all as specified and directed

PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, etc and similar work including necessary form work complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of flooring and finished even and fair complete all as specified and directed.

Chequered cement concrete coloured tiles 30 cm x 30 cm x 20-22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed.

Cutting and tapping of existing 40mm pipe and inserting a Tee for new connection of size 20mm including reducers requred if any complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of Plastic Emulsion Paint over a coat of primer over one coat of wall care putty 2-3mm thick including sanding and preparation of surface to a true, even and smooth finish complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying two coats of plastic emulsion paint over primer, over one coat of wall care putty 2-3mm thick in two layers including sanding and preparation of surfaces to a true, even and smooth complete all as specified and directed.

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100mmx62mmx50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be including glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, in ceiling finished even and smooth without using extra cement all as specified and directed

Brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed.

Durastone Heavy Duty tiles of thickness 15 to 16mm (Rectangle/ Square) of area 0.09 Sqm to 0.18 Sqm as floors set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including screed 15mm thick in cement mortar 1:4 complete all as specified and directed.

Durastone Heavy Duty tiles of thickness 15 to 16mm (Rectangle/ Square) of area 0.09 Sqm to 0.18 Sqm as in skirting/ dadoo set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including screed 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Complete removal of old treatment of wall and applying two coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted over a coat of primer over a coat of external wall care putty smooth finish complete all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multistranded copper conductor single core cable 1100 volts grade in and including PVC surface conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed multistranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/ Ex-fan point controlled by one switch 5Amps SP and making good surface finish all as specified and directed. Note: (i) Cutting chasis of wall / roof will be paid separately. (ii) Sunkenbox / cover plate for modular plate etc will be measured separately.

All as per Item No 147 hereinbefore but One 2 pin /3 pin 5 Amps socket out let on independent Board all as specified and directed.

All as per Item No.147 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amps, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 157 hereinbefore but SPN 230V 32-40 Amps capacity all as specified and directed.

Supply and fix 10W LED lamp, B-22, 5 star lamp, lumen 1200 & 6000K holder type all as specified and directed. Make Havells Cat Part No-LHLDEUEBML8Z010 / Phillps/ CG

22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. HavellsCat Part No. LHEXBLP7PN1W022 / CG/ Philips / Bajaj.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXARP7IN1W020 / Philips/ CG/ Orpit

Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed. Make: Crompton/ Bajaj/ Racold

PVC connections 15mm size with PTMT nuts of length 300mm all as specified and directed.

Bib tap of size 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) all as specified and directed

Tube medium grade fixed complete to wall and ceiling or laid in floor of size 15mm with all fittings and fixing complete including necessary excavation, clip, wall hooks, wooden plugs etc and fittings with existing pipe line of any size complete all as specified and directed

15mm dia bore stop valves, cast copper alloy screwed down high pressure fancy type, chromium plated screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A 240V SP MCB all as specified and directed. Make-Legrand/ ABB/ Havells

Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm including making openeing brick/ stone Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed.

Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 2.5 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 2.5 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 3 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate with Frame White cover plate with frame, 4 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 1 / 2 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 3 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 4 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 6 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate With Frame White cover plate with frame, 1 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate With Frame White cover plate with frame, 2 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate With Frame White cover plate with frame, 6 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Taking down old unsv FTL fittings, Supply and fix 24W LED batten light Lum output 2000 CCT 6500K size 115x2.5x3.5 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. Panasonic Product Code-PBTM06247 or equivalent in Philips / Bajaj.

LED bulk head light fitting 12W 6500K lumen output 1080 including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make. Panasonic Product Code-PBHM02127 or equivalent in Philips / Bajaj.

LED luminaire 5700K, 60 Watts, 220V AC Aesthetically designed robust LED high bay equipped with specially designed heat sink and reliable interated energy efficient driver to meet different requirement including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed. Make. Panasonic Product Code-PBYM11608 or equivalent in Philips / Bajaj.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Wall mounted 10W LED (2ft) batten comprising of thermally conductive material, pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser glare free, smooth light distribution lamp, colour white all as specified and directed. Make: CG Cat No: Trimline LDL-10-CDL or equivalent in Philips / Bajaj / Havells.

LED Security Light fitting of 25 watts comprising of epoxy powder coated housing, enclosed with glass cover in frame, with protection IP65 complete with all accessories and lamp colour white and fixing in and including GI bracket of suitable size/ dia all as specified and directed. Make:CG Cat No: LSTS-25-CDL-M or equivalent in Philips / Bajaj / Havells.

LED spot light fitting 12 watts capacity long life with 30000 burning hours complete all as specified and directed. Make:CG Cat No: CDR-212-12-40 SL-NWH or equivalent in Philips / Bajaj / Havells.

Supply and fix ovrehead adjustable shadow less O.T light ceiling Mounted Slim Single Dome LED OT Light all as specified and directed. No of Domes - 1 No Aerodynamically Designed Aluminium Dome for Modern luminar flow Ots. Sterilizable Handle for focusing Drift free spring rotation of 360° Dome Diameter 630mm Field -145mm -280mm Higher field depth of 750 for proper vision in deep cavity. COlor Temperature - 4100K CRI-90 Focus adjustable Two St Handles autoclavable for each dome No of LEDs - 35 Nos (Philips LUMILED - USA) High output of 1,35,000 Lux SMPS - 1No with intensity control - stepless control facilities Make : Philips model Philled 50 or equivalent

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the platee not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c, funnel, watering pipe etc. all as specified and directed including testing on completion.

Supply, Installation, commissioning and testing of inverter technology Hot & cold split type wall mounted Air conditioner (indoor & outdoor unit with cordless remote control unit) of capacity not less than 1.5 TR, BEE 5 star rating, fitted with rotary compressor, Refrigerant type R-410A/R-32 Rated cooling capacity rated (4500 Kcl/ Hrs) including PVC FRLS grade muilti stranded copper conductor cable 3 core 2.5 Sqmm for connections with outdoor unit, power coated brackets / chowki stand for outdoor unit, clamps, nuts, bolts washers drilling holes on walls/ ceiling for connection / suitable drain pipe and heavy duty copper connection pipe including insulation and making good the disturbed surface of wall / ceiling cement mortar, white cemet and painting work to match the existing surfaces of walls complete all as specified and directed. Make:- Daikin/ O-General/ Hitachi.

Supply, Installation, commissioning and testing of voltage stabilizer for automatic operation single phase, wall mounted, copper wounded, Air cooled with digital display designed for input variation between 160 volt to 260 volt with output voltage 220+9% volt with calibration accuracy +3% with high low cutoff, intelligent time delay facility and of capacity 4.0 KVA complete all as specified and directed. Make:- V-Guard Dura 2040 digital voltage stabiliser / MICROTEK/ VOLINA/ SINETRAC

AC box 25 Amps three pin socket with one 25 Amps SP MCB complete all as specified and directed. Make Legrand / ABB/ Havells

sree devi construction