Various Mechanical and Electrical Works at Staff quarters of Kasturba Hospital, Chinchpokali.

Unit rate of 240V/415V, C Curve, 10kA, Miniature circuit breaker suitable for DB mounting complete with connection, testing & commissioning etc. as required.- 16A/20A SP MCB

SUPPLY & INSTALLATION OF ANGLE IRON FRAME WORK 40 x 40 x 5 mm of M.S.angle.

MAINS -Wiring & Laying rate for mains include wires/flexible cables, pull boxes, flexible conduit, conduit junction box, clamps, cleats, hardware, accessories, anchor fasteners etc. It shall include supply and installation of all the above as applicable .- 1.1 kV grade 2 NOSs. (P+N) copper conductor wires of area 4.0 sq mm and 1NOS. (E) 2.5 sq. mm copper wire for 15 /16 Amp single phase switch.

Supply & laying I.S.I. mark 'B' class GI Pipe -15 mm dia.

1st category Cu armoured cables FRLSZ outer sheathed- 3C x 1.5 Sq.mm

Work of supply and erection of shed structure to cover scrubber unit

Lightning Protection of 5 pronged air terminal

Earthing Continuity Conductors- 32 x 6mm Tinned copper

Earthing Continuity Conductors -25 x 3mm GI

Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043.

Providing & erecting 4 m high (clear height) galvanized OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification

Cable End Termination for Aluminium Cables 3C X 10 SQ.MM

Cable End Termination for Aluminium Cables 4C X 16 SQ.MM

1.1 kV grade stranded Al conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables- 1st Category- 4C x 16 Sq.mm

1.1 kV grade stranded Al conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables- 1st Category- 3C x 10 Sq.mm

Excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner.

Replacement of existing damaged false ceiling sheet by new false ceiling of medium density fiber board.

Supply and fixing 20 mm thick Marine Ply Plank

Providing and applying first single coat of approved primer and two coats of acrylic plastic emulsion paint of an approved make and colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineerin-charge.

Providing and laying 800 x 800 x 9 To 10 mm thk. vitrified tiles as specified

Providing and fixing in position collapsible steel gates with vertical channels