REPAIR MAINTENANCE OF WATER SUPPLY PUMP SETS AND CONNECTED ACCESSORIES, WATER SUPPLY DISTRIBUTION SYSTEM, REPAIRS TO SPRINKLER SYSTEM AND ALLIED SERVICES AT VAYUSENA NAGAR NAGPUR

Amount

Material and labour for repairs/rectification of leakage in UG Ductile iron/cast iron pipe Tyton/ lead joint by suitable size of tyton rubber gasket/caulking lead wool/ pig lead complete including excavation and earth work for exposing the joints and working space on the site, returning filling in and making good to the existing earth level of the surroundings after repair for the following sizes of pipes all as specified and directed. Note: Cost including excavation, returning, refilling & tyton rubber gasket/lead wool / pig lead complete all as specified and directed. but 80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Material and labour for repair and Taking out sluice valves, re- facing, re-grinding and re- fixing, repacking stuffing box of sluice valve spindle, including taking apart and reassembling complete all as specified and directed but 80 mm dia bore

do- but 100 mm dia bore

do- but 150 mm dia bore

do- but 200 mm dia bore

Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at level not exc. 1.5 m above starting point.

Taking up or down steel tubing and connections including cleaning the sarviceable pipes for refixing or remove from site of following sizes. 15 mm Bore

20 mm Bore

25 mm Bore

40 mm Bore

80 mm Bore

Refixing of old steel tubing with fitting/fixture and connections in new or old position on walls, ceiling, floors etc all as specified and directed at site for following sizes :- 15 MM Bore

20 mm Bore

25 mmBore

40 mm Bore

80 mm Bore

Supply and lay in repairs medium grade galvanized pipe with all fitting such as tee,bends ,union ,elbow ,Socket,reducer etc:- 15 mm Bore

20 mm Bore

25 mm Bore

40 mm Bore

80 MM Bore

Cutting Existing steel tubing in position for alteration or additions as per site (each cut measured) in any condition all as specified and directed of following size:- 15 MM Bore

20 MM Bore

25 mm Bore

40 to 50 mm bore

80 mm Bore

Laying only steel tubin any grade and connections in new or old position on walls, ceiling, floors etc all as specified and directed at site for following sizes :- Note-: Steel tubing will be issued by department free for fixing under schedule 'B' items 50 mm bore

100 mm Bore

Supply and fix in repair GI unions ISI marked of following sizes all as specified and as directed. 50 mm

Taking down u/s and Supply and fix GI Plug ISI marked of following sizes including taking out the old one all as specified and as directed. 50 mm

Taking down u/s and Supply and fix GI sockets ISI marked of following sizes all as specified and as directed. 50 mm

Taking down u/s and Supply and fix GI TEE ISI marked of following sizes all as specified and as directed. 50 mm x 50 mm x 25 mm

50 mm x 50 mm x 50 mm

100 mm x 100 mm x 100 mm

100 mm x 100 mm x 50 mm

Taking down u/s and Supply and fix GI elbow ISI marked of following sizes all as specified and as directed. 50 mm

Taking down u/s and Supply and fix GI Nipples ISI marked of following sizes all as specified and as directed. 50 x 50 mm

"X" Hose nipple 50 mm/40 mmx100 mm long

Taking down u/s and Supply and fix GI Reducer sockets ISI marked of following sizes all as specified and as directed. 50 mm x 32 mm

50 mm x 25 mm

100 mm x 32 mm

Taking down and Supply and fix Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of the following sizes :- 50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Excavation in trench not exceeding 1.5 Mtr in depth and not exceding 1.5 Mtr in width and getting out in soft/loose soil.

Taking up cast iron or Ductile iron water mains (including all fittings), with spigot and socket / flange ends and lead joints inluding burning out joints and recovering lead of following sizes:- 80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Re laying Ductile iron/Cast iron pipes with spigoit and socket ends cenrifugally cast, Class LA in any length laid in trenchs of following sizes. 80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Supply and lay in trenches fixed on support ductile iron pipes, socket and Spigot ends, ISI marked Centrifugally Cast (Spun) Ductile Iron Pressure pipes conforming to IS:8329/2000 classification K-7 rating with nominal wall thickness as per IS, suitable for push-on-joint(Rubber gasket-D jointing) all as per site requriment Includinig all connected items for the following sizes-: 80 mm dia bore

100 mm dia bore

Supply and fix fittings/specials suitable for ductile iron pipes such as bends any type/radius and angle, tapers any type tees, cross, tail pieces with flanged, socketed / suitable for rubber tighten push on joints, caps, plugs, sheet pieces with flanged /socketed or both flanged or both socketed ends of any size upto 200mm bore complete all as specified and directed. Note :- The quoted rate shall deemed to be included cost for M & L for rubber gasket joints/ Titanic joint/Lead joint suitbale for DI pipe including jointing material of size UPTO 200 mm dia pipe .

Cutting CI/Ductile iron pipes and reducing to required length to the following sizes of pipes before laying all as specified and directed. 80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Screwing existing steel tubing for addition or alterations to the following sizes all as specified and directed at site for following sizes :- 15 MM Bore

20 MM Bore

25 MM Bore

40 to 50 mm bore

Supply and fix in repair high pressure, heavy duty cast iron non return sluice valve/ check valve of following sizes, conforming to BS 1868, Class PN 1.6, both ends flanged in existing line, after removal of old unserviceable non return valve without damaging to existing pipe line complete all as specified and directed by Engr-in-charge. Make: Kirloskar/Sir /Venus/kartarNote : Note : 1. Suitable size MS flanges for existing pipe line, 2. Joints and jointing materials shall be included under this item. 200 mm dia bore

150 mm dia bore

100 mm dia bore

80 mm dia bore

Taking down and Supply& fixing mechanical joint of made out of MS sheet of thickness not less than 10mm fabricated as per existing site requirement including long MS nut, bolt, rubber gasket, cutting/fixing of pipe in position of any size CI/MS/AC pipe with the help of manually as well as mechanical T&P complete all as directed for following sizes :- 80 mm dia bore

do- but 100 mm dia bore

do- but 150 mm dia bore

do- but 200 mm dia bore

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms by using excavated soil.

Supply and fixing in repairs 80mm size Butterfly Valve suitable for pressure rating PN 1.6 Mpa, conform to Standard API609/ BSEN 593 (BS 5155) complete with all accessories including taking down old butterfly valve all as specified and directed.

Supply and fixing in repair in position sluice valve confirming to IS 780 /IS 14846 – 2000 PN,1.6 flanged and S/S spindles with cap & handle opening arrangement of sizes given below incl taking down existing sluice valve and deposited to E/M store yard. 80 mm dia bore

do- but 100 mm dia bore

do- but 150 mm dia bore

do- but 200 mm dia bore

Supply and fixing in repair for PVC float valve high pressure with polythene float and fly complete, screwed for iron pipe or brass fenle and fixed in all as specified and directed of following size:- 20mm bore

25mm bore

Material and labour for cleaning of fountain by pumping out the water below foot valve and cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder, acids, removing of dirty sludge and cleaning of sump by using fresh water by providing tankar and clean entire surface repeatedly with fresh water and pumping out dirty water complete all as specified and as directed. Note (i) Contractor is responsible to rectify any damage occured in pumps, pipes, nozzeles, wire etc while cleaning of fountain and the same will be rectified without any extra cost. (ii) Cleaning of all nozzles, gate valves and other connected accessories incl minor repair shall be done without any extra cost.

Taking out unservicable & Supply and fix Sprinklers popup type 1 mtr radious of size 32 mm dia of polyethyline Arc to 0 to 360 degree tough material and swing joints with adopter all as specified and as directed. Note : (1) The quoted rate shall deeemd to be included cost for dismantling / Earth work / cutting existing U/s HDPE pipe 110/90/65/45 mm dia and Jointing of existing pipe (2) The cost shalll be including such as ends, sockets, elbows, unions, tees, reducing tees, adopters, socketrs, plugs, hose clips swing joints etc for connecting the sprinklers to HDPE pipe (Sample available in AGE E/M office) Make: Jain Irrigation/ Hunter/ Rain Bird/ Supreme

Taking out unservicable & Supply and fixingix Sprinklers popup type of hight 4 inch minimum throw radious 17 feet adjustable Arc to 0 to 360 degree recommended pressure 2.1 bars of 32/20 mm size and made of poly ethyline tough matrial complete all as specified and as directed. Make : Hunter/Rain Bird Note : (1) The quoted rate shall deeemd to be included cost for fittings such as ends, sockets, elbows, unions,tees, reducing tees, adopters, socketrs, plugs, hose clips etc of any size required to fix the sprinklers to existing HDPE pipe, swing joints for sprinklers for connecting to HDPE pipe (Sample available in AGE E/M office)Make Jain Irrigation/Hunter/ Rain Bird/Supreme

Supply and fixing in repair cast iron Air release valve with double orifice type (small & large orifice ) , Kinetic type non clogging & self sealing valves for trouble free operation, totally tamper proof Ideally suited for turbid or clear water conforming to IS:14845/AWWA pressure rating PN 1.6 and jointing materials like gaskets, flanges , nuts and bolts and wahser etc complete for fixing arrangement in water pipes mains for following sizes incl taking out old unsv all as directed. 100 mm bore pipe

Suitable for 80 mm bore pipe

Suitable for 50 mm bore pipe

Supply and fix ms clamp 100/80 mm dia pipe including taking down old unserviceable clamp complete all as specified and as directed.

Dismantling and removing damaged valve chamber brick masonry, PCC coping, pits of valve chambers and removing from site to a distnace exc 50 metre but not exc. 100 metre all as directed.

Material and labour for construction of valve chamber of size 1500x 1500 x 1000 mm deep dimensions (Over all internal dimension) for sluice valve etc. with PCC foundation, PCC block masonry walls, Plastering, PCC Coping, white washing, mild steel chamber cover, painting to chamber cover including Excavation and earth work in any type of soil complete all as specified below:- Valve chamber shall be provided with the following specifications:- (i) Cement concrete for foundation (1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick extended up to 150 mm beyond the outer face of block masonry. (ii) Walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks , setting in CM 1:6 complete. (iii) Internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with CM (1:4), 15 mm thick finished even and smooth. (iv) 50 mm thick coping in PCC 1:3:6 type C1 over block masonry wall. (v) Entire plastered surfaces shall be treated with 3 coat of white wash. (vi) Chamber cover shall be of 3 mm thick MS sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel surface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer.

Material and labour for construction of valve chamber of size 1000x 1000 x 1000 mm deep dimensions (Over all internal dimension) for sluice valve etc. with PCC foundation, PCC block masonry walls, Plastering, PCC Coping, white washing, mild steel chamber cover, painting to chamber cover including Excavation and earth work in any type of soil complete all as specified below:- Valve chamber shall be provided with the following specifications:- (i) Cement concrete for foundation (1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick extended up to 150 mm beyond the outer face of block masonry. (ii) Walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks , setting in CM 1:6 complete. (iii) Internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with CM (1:4), 15 mm thick finished even and smooth. (iv) 50 mm thick coping in PCC 1:3:6 type C1 over block masonry wall. (v) Entire plastered surfaces shall be treated with 3 coat of white wash. (vi) Chamber cover shall be of 3 mm thick MS sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel surface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer.

Taking out U/s & Supply and fix LED light 20 watts and RGB (multicolour) water proof luminaries IP 65 protection with of high out put of LEDs housed in complete enclosure include toughened glass with elastomer seal special plastic cable gland compact socket head fastners and mounting bracket are all of stainless steel provided for aiming the object complete all as specified and as directed.

Taking out U/s & Supply and fix LED light 30 watts and RGB (multicolour) water proof luminaries ip 65 protection with of high out put of LEDs housed in complete enclosure include toughened glass with elastomer seal special plastic cable gland compact socket head fastners and mounting bracket are all of stainless steel provided for aiming the object complete all as specified and as directed.

Supply and fixing in repair MCCB, 250A DN2-250D, 3P,415 volts,25KA with thermal magnetic setting complete to be fitted in existing panel complete all as specified and as directed by Engr-in-charge .

Supply and fixing in repair MCCB, 250A, DN2-250D,4P,415 volts,25KA with thermal magnetic setting complete to be fitted in existing panel complete all as specified and as directed.

Supply and fixing in repair DU250 MCCB, 125A, 3P,415 volts,25KA with thermal magnetic setting complete to be fitted in existing panel complete all as specified and as directed.

Supply and fixing in repair 125A, FP MCCB,18 KA complete all as specified and as directed.

Supply and fixing in repair MCCB, 160A, DH160, 3P complete all as specified and as directed.

Supply and fixing in repair MCCB DH 200 3P complete all as specified and as directed.

Supply and fixing in repair MCCB DH100, 3P complete all as specified and as directed.

Supply and fixing in repair 3P, 63A, MCB complete all as specified and as directed.

Supply and fixing in repair 3P, 40A, MCB complete all as specified and as directed.

Supply and fixing in repair 32A, 3P, MCB complete all as specified and as directed .

Supply and fixing in repair FP 63A, MCB complete all as specified and as directed.

Supply and fixing in repair MCB SPN 20 to 32 Amp 10 KA complete all as specified and as directed.

Supply and fixing in repair of MCB SP 6A to 25 Amp complete all as specified and as directed.

Supply and fixing in repair of of MCB three pole of capacity 25 Amp to 40 Amp of 10 KA complete all as specified and as directed .

Supply and fixing in repair MCB TP 10A complete all as specified and as directed.

Supply and fixing in repair MCB TP 32A complete all as specified and as directed.

Supply and fixing in repair MCB SP 6A complete all as specified and as directed.

Supply and fixing in repair MCB SP 25A complete all as specified and as directed.

Supply and fixing in repair contactor MNX-25 FP complete all as specified and as directed by Engr-in-charge.

Supply and fixing in repair MNX 18 Contactor, 3P (1NO) complete all as specified and as directed .

Supply and fixing in repair MNX 18 Contactor, 3P (1NC) complete all as specified and as directed .

Supply and fixing in repair MNX 9 Contactor, 3P (1NO) complete all as specified and as directed.

Supply and fixing in repair MNX 9 Contactor, 3P (1NC) complete all as specified and as directed.

Supply and fixing in repair MNX-12 complete all as specified and as directed.

Supply and fixing in repair MNX-32 complete all as specified and as directed.

Supply and fixing in repair contactor MNX-22 complete all as specified and as directed .

Supply and fixing in repair 1NO+1NC complete all as specified and as directed.

Supply and fixing in repair MN2 (4.5-7.5) complete all as specified and as directed.

Supply and fixing in repair MN2 (6-10) complete all as specified and as directed.

Supply and fixing in repair MN2 (9-15) complete all as specified and as directed.

Supply and fixing in repair Mn2 relay 16-25A complete all as specified and as directed.

Supply and fixing in repair switch fuse unit 63Amp complete all as specified and as directed.

Supply and fixing in repair HRC fuse 50 A complete all as specified and as directed by Engr-in-charge .

Taking out unservicable pvc hose pipe green flexiable and Supply and fix heavy green hose pipe flexiable PVC material with fibre reinforce 32 mm bore including suitable metal clamps with nut and bolts complete all as specified and as directed.

Taking out unservicable pvc hose pipe green flexiable and Supply and fix heavy green hose pipe flexiable PVC material with fibre reinforce 40 mm bore including suitable metal clamps with nut and bolts complete all as specified and as directed.

Taking out unservicable pvc hose pipe green flexiable and Supply and fix heavy green hose pipe flexiable PVC material with fibre reinforce 50 mm bore including suitable metal clamps with nut and bolts complete all as specified and as directed.

Taking out unservicable pvc hose pipe green flexiable and Supply and fix heavy green hose pipe flexiable PVC material with fibre reinforce 63 mm bore including suitable metal clamps with nut and bolts complete all as specified and as directed.

Taking out unservicable & Supply and lay High density polyethylene pipes (HDPE) of pressure rating 6 kgf/ sq cm fixed complete and including with all pipe fittings such as ends, sockets, elbows, unions,tees, reducing tees, adopters,socketrs, plugs, hose clips etc. of size 32 mm bore complete all as specified and as directed. Note:- The cost of joint for existing pipe to new pipe shall be deemed to be included in this item rate.

All as per item No 79 above but of size 40 mm bore.

All as per item No 79 above but of size 65 mm bore.

All as per item No 79 above but of size 90 mm bore.

Material and labour for painting of pipe line 200 mm dia MS/DI pipe for supply line / feeding line of over head tank after removing all dust, dirt etc and clean the surface thoroughly and painting with one coat of red oxide and two coats of synthetic enamel paint including writing inlet/ outlet pipe and marking the direction of flow with arrow complete all as specified and directed. Note : Painting shall be done as per colour coding.

Material and labour for painting of pipe line 150 mm dia DI/ MS pipe for supply line /Overflow line of over head tank after removing all dust, dirt etc and clean the surface thoroughly and painting with one coat of red oxide and two coats of synthetic enamel paint including writing inlet/ outlet pipe and marking flow direction with arrow complete all as specified and directed. Note : Painting shall be done as per colour coding

Material and labour for painting of pipe line 100 mm dia DI/ MS pipe after removing all dust, dirt etc and clean the surface thoroughly and painting with one coat of red oxide and two coats of synthetic enamel paint including writing inlet/ outlet pipe and marking flow direction with arrow complete all as specified and directed. Note : Painting shall be done as per colour coding

Material and labour for painting of pipe line 80 mm dia DI/ MS pipe after removing all dust, dirt etc and clean the surface thoroughly and painting with one coat of red oxide and two coats of synthetic enamel paint including writing inlet/ outlet pipe and marking flow direction with arrow complete all as specified and directed. Note : Painting shall be done as per colour coding

Taking out unservicable cable of size 4 sqmm and Supply and fix 3 core 4 sqmm cable PVC insulated and sheathed submersible flat type with stranded copper conductor including PVC conduit 20mm/25mm and connection used water proofing tape as per site requirement complete all as specified and as directed.

All as per item No 87 above but cable of size 3 core 2.5 sqmm cable

All as per item No 87 above but cable of size 1.5 sqmm 3 core

Taking out unservicable starter and Supply and fix three phase Motor starter DOL in sheet steel enclosure suitable for upto 7.5 HP capacity submersible pump with relay range 9-14 Amps complete all as specified and as directed. Make: C&S CAT No- BE1SPSDDX204316X / L&TCAt NO. MU-G6(SS97756) / Legrand

Material and labour for replacing rubber coupling of coupling set of any pumpset at different pump house complete all as specified and as directed.

Material and labour for dismantling centrifugal pump set from the existing foundation after disconnecting the inlet/out let pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, servicing the pump set including replacement of unserviceable spare parts reassembling and re-fixing to its original position, making mechanical & electrical connections and testing pumping set complete all as specified and directed for the following:- Note: - (i) Spares to be replaced shall be measured and paid separately as supply only (ii) Rewinding/ Lathing shall be measured and paid separately in respective items of BOQ. (iii) In addition to above the rate quoted by contractor deemed to be includes of transportation, lifting of pump set and replacement of worn out minor parts other than the supply only items such as bushes, check nut etc., if any required for proper functioning of pump set.

Centrifugal pump set/monoblock/booster pump coupled with electric motor of capacity 1 HP to 2HP single/three phase, 415 Volts 50 HZ.

Centrifugal pump set/monoblock/booster pump coupled with electric motor of capacity 3HP three phase, 415 Volts 50 HZ.

Centrifugal pump set/monoblock/booster pump coupled with electric motor of capacity 10HP 3phase, 415 Volts 50 HZ.

Centrifugal pump set coupled with electric motor of capacity 20 HP 3 phase, 415 Volts 50 HZ.

Centrifugal pump set coupled with electric motor of capacity 25 HP 3 phase, 415 Volts 50 HZ.

Centrifugal pump set coupled with electric motor of capacity 50/60 HP 3 phase, 415 Volts 50 HZ.

Material and labour for rewinding the centrifugal pump set motor by providing high quality of class 'B' paper insulation inside the slots, and rewinding with super enamel copper wire of same size and gauge as per existing rapping up with high quality cotton tape and varnishing with super quality oil including drying upto desired temperature and desired time complete including taking old burnt out copper winding, insulation material and cleaning the slots complete all as specified and directed for the following capacity motor:- 1 HP to 2HP 3 phase, 415 Volts 50 HZ

3HP 3 phase, 415 Volts 50 HZ

10HP 3 phase, 415 Volts 50 HZ

20 HP 3 Phase, 415 Volts 50 HZ

25 HP 3 Phase, 415 Volts 50 HZ

50 HP/60 HP, 3 Phase, 415 Volts 50 HZ

Material and labour for lathe machine work for pump repaired vide item no 92.01 to 92.06 here in before including necessary transportation if any complete all as directed.

Material and labour for lathe machine work for motor repaired vide item no 93 to 93.05 here in before including necessary transportation if any complete all as directed.

Supply only the following spares parts of centrifugal pump set suitable for replacing under item no 92.01 to 92.06 here in before: - Impeller made of brass for 20 HP pump

Impeller made of brass for 25 HP pump

Impeller made of brass for 50/60 HP pump

Pump shaft made of stainless steel for 10 HP pump

Pump shaft made of stainless steel for 20 HP pump

Pump shaft made of stainless steel for 25 HP pump

Pump shaft made of stainless steel for 50/60 HP pump

Sleeve made of stainless steel for 10 HP pump

Sleeve made of stainless steel for 20 HP pump

Sleeve made of stainless steel for 25 HP pump

Sleeve made of stainless steel for 50/60 HP pump

Bearing made of stainless steel for 1 to 3 HP pump

Bearing made of stainless steel for 10 HP pump

Bearing made of stainless steel for 20 HP pump

Bearing made of stainless steel for 25 HP pump

Bearing made of stainless steel for 50/60 HP pump

Shaft Lock

Gland Cap made of brass for 10 HP pump

Gland Cap made of brass for 20 HP pump

Gland Cap made of brass for 35 HP pump

Gland Cap made of brass for 60 HP pump

Gland Cap/fondation bolts,Nuts made of stainless steel

Coupling assembly with key for 20 HP pump

Coupling assembly with key for 25 HP pump

Coupling assembly with key for 50/60 HP pump

Bakelite electrical 6/3 pole terminal for 60 HP motor

Fan Blade of required size

Material and labour taking out defective submersible (vertical) pump set of capacity upto 5 HP from borewell/shallow well for repair by lifting borewell pipe of any type and size from 40m to 70m depth well after disconnecting electrical and pipe line connection, complete by means of chain pully block or other T and P, transporting to store for safe custody or work shop for repair and reinstalling back to borewell, lowering after reconnecting electrical and pipe line connection, commissioning and testing on full load compete all as specified and directed. Note :- (i) Repairing of pump set only will be measured and paid separately in respective items of BOQ.

Material and labour for repair of 50 mm bore GI pipe taken out vide item No 6 above by cutting down and removing damaged threaded portion of pipe from both ends and making the deep threads on both ends of the pipe and supply and fix a socket heavy grade screwed and welded at one end complete all as specified and directed.

Material and labour for repairing of submersible (vertical) pump set 5 HP capacity by opening the pumpset and replacement of unserviceable parts, oiling/greasing the lubricating the parts and reassembling, painting of submersible pumpset with one coat of synthetic enamel paint after clearing and scrubbing complete including testing for satisfactory operation all as specified and directed. Note:- (i) The rewinding, Lathe work, replacement of unserviceable parts with new parts will be measured and paid separately under respective items of BOQ as supply only and labour element for fixing including greasing, overhauling and packing of pump set shall deemed to be included in the unit rate quoted. (ii) Cost of other minor items / spares such as nut, bolts, washer, gaskets, paints which are not covered under Sch 'A' but required for effective functioning of the plant shall be deemed to included in quoted rate.

Material and labour for rewinding the submersible pump set motor 5 HP capacity using suitable size PVC insulated copper wires, replacing the worn out bushes, bearing etc., and reassembling pump and motor including testing for satisfactory operation complete all as specified and directed.

Material and labour for lathe machine work for pump repaired vide item no 99 here in before including necessary transportation if any complete all as directed.

Material and labour for lathe machine work for motor repaired vide item no 99 here in before including necessary transportation if any complete all as directed.

Supply only the following spares parts of submersible pump set suitable for replacing under item no 99.00 here in before: - Top bowl housing assembly

"O" ring valve metal seat

Brass sleeve/distance piece

Key set

Stage Bowl

Thrust Bearing assembly

Strainer (with screwing etc.)

Brass bush (4 No's set)

Coupling assembly

Impeller made of stainless steel

Pump shaft

Diffuser

Cable guard made of stainless steel

Cheese head cap screw

Casing strip with threaded bolt end

Sand guard

Rotor shaft pump

CIR clip

Lower end of the shield of motor

Supply and lay in repairs to 3 core flat cables water proof with bare bunched copper conductor insulated and sheathed with PVC 1100 Volts grade of size 6 sqmm for submersible pump complete all as specified and directed.

Material and labour for taking out horizontal submersible pump set 3 HP capacity from static water tank/open well/fountain and repairing by opening the pumpset and replacement of unserviceable parts, oiling/greasing the lubricating the parts and reassembling, painting of submersible pumpset with one coat of synthetic enamel paint after clearing and scrubbing complete including testing for satisfactory operation all as specified and directed. Note:- (i) The rewinding, Lathe work, replacement of unserviceable parts with new parts will be measured and paid separately under respective items of BOQ as supply only and labour element for fixing including greasing, overhauling and packing of pump set shall deemed to be included in the unit rate quoted. (ii) Cost of other minor items / spares such as nut, bolts, washer, gaskets, paints which are not covered under Sch 'A' but required for effective functioning of the plant shall deemed to be included in the unit rate quoted.

Material and labour for rewinding the horizontal submersible pump set motor 3 HP capacity using suitable size PVC insulated copper wires, replacing the worn out bushes, bearing etc., and reassembling pump and motor including testing for satisfactory operation complete all as specified and directed.

Material and labour for lathe machine work for pump repaired vide item no 105 here in before including necessary transportation if any complete all as directed.

Material and labour for lathe machine work for motor repaired vide item no 105 here in before including necessary transportation if any complete all as directed.

Supply only the following spares parts of horizontal submersible pump suitable for replacing under item no 105 here in before: - Key

Brass bush

Thrust Bearing

Impeller made of stainless steel

Material and labour for taking out horizontal submersible pump set 5 HP capacity from static water tank/open well/fountain and repairing by opening the pumpset and replacement of unserviceable parts, oiling/greasing the lubricating the parts and reassembling, painting of submersible pumpset with one coat of synthetic enamel paint after clearing and scrubbing complete including testing for satisfactory operation all as specified and directed. Note:- (i) The rewinding, lathe work, replacement of unserviceable parts with new parts will be measured and paid separately under respective items of BOQ as supply only and labour element for fixing including greasing, overhauling and packing of pump set will be included in the unit rate quoted. (ii) Cost of other minor items / spares such as nut, bolts, washer, gaskets, paints which are not covered under Sch 'A' but required for effective functioning of the plant shall be deemed to included in quoted rate.

Material and labour for rewinding the horizontal submersible pump set motor 5 HP capacity using suitable size PVC insulated copper wires, replacing the worn out bushes, bearing etc., and reassembling pump and motor including testing for satisfactory operation complete all as specified and directed.

Material and labour for lathe machine work for pump repaired vide item no 110 here in before including necessary transportation if any complete all as directed.

Material and labour for lathe machine work for motor repaired vide item no 110 here in before including necessary transportation if any complete all as directed.

Supply only the following spares parts of horizontal submersible pump suitable for replacing under item no 110 here in before: - Key

Brass bush

Thrust Bearing

Impeller made of stainless steel

Material and labour for taking out horizontal submersible pump set 5 to 15 HP capacity from static water tank/open well and repairing by opening the pumpset and replacement of unserviceable parts, oiling/greasing the lubricating the parts and reassembling, painting of submersible pumpset with one coat of synthetic enamel paint after clearing and scrubbing complete including testing for satisfactory operation all as specified and directed. Note:- (i) The rewinding, Lathe work, replacement of unserviceable parts with new parts will be measured and paid separately under respective items of BOQ as supply only and labour element for fixing including greasing, overhauling and packing of pump set will be included in the unit rate quoted. (ii) Cost of other minor items / spares such as nut, bolts, washer, gaskets, paints which are not covered under Sch 'A' but required for effective functioning of the plant shall be deemed to included in quoted rate.

Material and labour for rewinding the horizontal submersible pump set motor 15 HP capacity using suitable size PVC insulated copper wires, replacing the worn out bushes, bearing etc., and reassembling pump and motor including testing for satisfactory operation complete all as specified and directed.

Material and labour for lathe machine work for pump repaired vide item no115 here in before including necessary transportation if any complete all as directed.

Material and labour for lathe machine work for motor repaired vide item no 115 here in before including necessary transportation if any complete all as directed.

Supply only the following spares parts of horizontal submersible pump suitable for replacing under item no 115.00 here in before: - Key

Brass bush

Thrust Bearing

Impeller made of stainless steel

Supply and fixing PVC insulated copper conductor stranded type, 1100 volts grade of size 10sqmm 3 core electric cable, including connecting to motor & starter with suitable thimble, laid in the conduit including dismantling old one complete all as specified and as directed.

Supply and fixing in repairs pressure gauge, 100 mm size dial , 0-14kg rating fitted on delivery side of pump set , including all necessary items required like ball valve and connecting pipe & dismantling the old one complete all as specified and as directed.

Supply and fixing indicator lamp LED type, 230 Volts, AC (different colours for indicating R, Y, B phases) with holder incl dismanlting old one complete all as specified and as directed.

Material and labour preparation of old painted surface of motor & pump installation by removing all dirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour over a coat of red-oxide primer on Pump set - 04 Nos including their sluice valves, NRV and delivery/suction pipe line & channel in gorewada pump house all as specified & directed

Material and labour preparation of old painted surface of motor & pump installation by removing all dirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour over a coat of red-oxide primer on Pump set - 04 Nos including their sluice valves, NRV and delivery/suction pipe line & channel in New pump house all as specified & directed

Material and labour preparation of old painted surface of pump installation by removing all dirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour over a coat of red-oxide primer in Pump set - 02 Nos including their sluice valves,NRV and delivery/suction pipe line channel in Command pump house all as specified & directed

Material and labour preparation of old painted surface of pump installation by removing all dirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour over a coat of red-oxide primer in Pump set - 02 Nos including their sluice valves,NRV and delivery/suction pipe line channel in officer mess pump house all as specified & directed

Material and labour for replacing rubber coupling of coupling set of any pumpset at different pump house complete all as specified and as directed.

Supply and fixing in repairs Single phase preventer and connected to existing strater, suitable for centrifugal pump set of capacity 03 HP to 60 HP

Suppy and fix in repair DOL starter 5-7.5 HP.

Material and labour Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate n. less than 1.5 mtr below ground level connected to galvanized earth strip 25x4 mm dia by means of blots, nuts, check nut and washer of galvanized steel, including necessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and medium grade GI pipe 40mm dia pipe of required length for protection of GI strip and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR part - I and all as directed

Supply and fixing GI strip of size 25 x 4 mm with saddles and fixing screws, etc, down conductors above ground complete all as specified.

Material and labour for cleaning of underground static water tank (SWT) of capacity 20,000 -25,000 gallon after scrapping out the scales/deposits from all inner surfaces of tank thoroughly, washing with bleaching powder solution (mixed @ 0.5 Kg of bleaching powder of chlorine content 30% per 1000 liters of water), bailing out the settled materials completely away from the site within 100 metres distance, cleaning the tank with clean water and finally sterilizing the tank as mentioned in notes below and writing “TANK CLEANED ON…..”(date), “DUE DATE ON…..(date) with 10 cm size white letters on black back ground by engaging skilled artist using best quality synthetic enamel paint all as specified and directed by Engr-in-Charge :- Notes : The contractor should follow the following procedure in addition to above which demeed to be included in the contractor quoted rate. (a) Mechanized removal of all dirty water by using high capacity submersible pumps. (b) Removal of sludge by using vaccum operated pump (c) Cleaning of walls and ground by high pressure rotary jet . (d) Removal of all dirt particles by industrial wet vaccum cleaner leaving the tank physically cleaned as per Engr-in- Charge satisfaction. (e) Sterilization of tank by agents eco-friendly, bio-degradable and highly effective against all pathogens, or approved chemical. (g) All the required Tools and plants, lubricants/oils and materials will be supplied by the contractor during the work.

Supply , Installed and testing of LT panel board CPRI approved Outdoor type, weather and vermin proof, having suitable size (as per manufacturer ) factory fabricated, cubical type, made out of CRCA sheet 03 mm thick suitable for 415 volt, 3 phase, 4 wire system with front openable each compartment and locking arrangement with PVC star screwing hinged arrangement, epoxy powder coated , internal wiring complete with copper conductor cable for metering system and CT's complete including necessary fabricated stand made by angle iron/channel of height 45 cm from ground level and to the platform all as specified including taking down old one all as specified, comprising by providing of the following equipments /fitments complete(for walking plaza):- a)MCCB, 4pole , 415 Volts of current rating 100 Amps, thermal magnetic release rupturing capacity 25 KA- 01 No(For incoming) b)DOL starter complete with relay, OLR,motor protection relay,single phase preventor Suitable upto for 5HP submersible motor & pump -2NOS c)MCB, TP , 415 Volts of current rating 32 Amps, -2No d)MCB TPN 40 Amps -01 No e)MCB SPN 32 Amps -02 No f)MCB SP 10 to 32 Amps -04 No g)Internal Control Wiring with PVC insulated copper conductor multi standard appropriate guage including all coper lugs,CTs and connection incoming/outgoing cable with lugs and cable glands ,connector etc. h)Digital Voltmeter digital (0-500Volt) for incoming & pump motor i)Digital Ammeter(0-100Amps) for incoming & pump motor j)Indicator Lamp LED type for incoming and pump/motor k)Start & Stop Push Button - for starter l)Single phase preventor - 02 No m) Aluminium busbar suitable (as per manufacturer) for three phase four wire system of current rating 200 Amps covered with coloured PVC sleeves as per colour code mounted on insulators -01set

Supply and fixing Gun metal gate valve class-1 for 15 mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, fixed as in repair complete all as specified and directed.

All as per item No 136 above but of size 20 mm bore

All as per item No 136 above but of size 40 mm bore

All as per item No 136 above but of size 50 mm bore

Taking down U/s & Supply and installation , testing , commissioning of hydrochloride solution dosing pump capable for 0-20 lph, 0.37 kw for maintain free chlorine @7.0 ppm for desinfection complete with suction and discharge pipe , self priming foot valve , adapter complete all as specified and directed.

Supply and fix in repair unservicable brass nozzle and Supply and fix brass nozzle of size 1/4 " dia suitable for fountain complete all as specified and as directed. Note: - The quoted rate shall deemed to be included cost for fixing of nozzle with suitable size of socket nozzole welded in existing pipe in fountain.

Supply and fixing in repair Cast iron foot valve confirming to IS:4038 with rubber seating, flanged end complete incl taking out old unsvall as specified and as directed. (a) 100 mm bore

(b) 150 mm bore

(c) 80 mm bore

Material and labour in repair for cement concrete type 1:3:6 (40 mm graded aggregate ) thickness of cement concrete is not less than 100 mm for thicknfor making floors for new pump house/telenkheri , The rate shall be included for finishing cement concrete surface even and smooth all as specified and as directed by EIC

Supply and fixing in repair pressure switch for booster pump upto 1HP as per site all as directed.

Supply only Chloroscope for measurement of chlorine level in water showing indication 0.1,0.2,0.5,1.0,1.5,2.0 & above including box type indicator showing indication along with two numbers test tube and reagent complete all as specified and directed

Supply , Installed and testing of LT panel board CPRI approved Outdoor type, weather and vermin proof, having suitable size (as per manufacturer ) factory fabricated, cubical type, made out of CRCA sheet 03 mm thick suitable for 415 volt, 3 phase, 4 wire system with front openable each compartment and locking arrangement with PVC star screwing hinged arrangement, epoxy power coated , internal wiring complete with copper conductor cable for metering system and CT's complete including including necessary fabricated stand madeof angle iron/channel of height 45 cm from ground level and to the platform all as specified including taking down old one all as specified, comprising by providing of the following equipments /fitments complete(for walking plaza):- a)MCCB, 4pole , 415 Volts of current rating 100 Amps, thermal magnetic release rupturing capacity 25 KA- 01 No(For incoming) b)Star Delta starter complete with relay, OLR,motor protection relay,single phase preventor Suitable upto for 15HP submersible motor & pump -1NOS c)MCB, TP , 415 Volts of current rating 63 Amps, -1No d)MCB TPN 40 Amps -01 No e)MCB SPN 32 Amps -02 No f)MCB SP 10 to 32 Amps -04 No g)Internal Control Wiring with PVC insulated copper conductor multi standard appropriate guage including all coper lugs,CTs and connection incoming/outgoing cable with lugs and cable glands ,connector etc. h)Digital Voltmeter digital (0-500Volt) for incoming & pump motor i)Digital Ammeter(0-100Amps) for incoming & pump motor j)Indicator Lamp LED type for incoming and pump/motor k)Start & Stop Push Button - for starter l)Single phase preventor - 02 No m) Aluminium busbar suitable (as per manufacturer) for three phase four wire system of current rating 200 Amps covered with coloured PVC sleeves as per colour code mounted on insulators -01set

Supply and fixing Tank Nipple suitable for HDPE/PVC water tank of following sizes:- 15MM Bore

20MM Bore

40MM Bore

Supplying, laying, testing and Commissioning cable XLPE insulated aluminium conductor,stranded, armoured, PVC sheathed, LT 1100 volt grade, heavy duty as per IS-7098 and providing suitable lugs and cable glands, laid in trenches/ ducts/fixed to wall/ roof/ poles including taking down existing cables complete all as specified and directed of following sizes. (a) 16 sqmm, 4 core

Material and labour for providing dry river sand as in sand cusioning for underground cable protection including punning down sand in layers complete all as specified & directed Note: Only punned thickness of sand shall be considered for measurement purposes.

Supplying and laying Cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40m laid perpendicular to axis of cable for protection of LT cables complete all as specified and directed.

Material and labour road cutting of size 30 cm width x 45 cm depth for laying of cables incl making good the road with necessary returning fillingand bituminious portion with concret and bituminious mixture and cemented portion with PCC in 1:2:4 , 15 cm thick from top and matching the surfaces with existing all as directed.Near to logestic section

Supplying and laying GI pipe Light grade (ISI marked) 50mm bore with connecting accessories, laid under road/ drain/fixed on wall etc for protection of cables complete all as specified and directed

Supply and fixing in repair Pressure tank upto 24 ltr capacity suitbale for booster pump upto capacity 1hp including fixing of washer,nut bolt complete all as directed.

Supply only calcium hypochlorite granules having chlorine content => 65% in air tight containers all as directed.

Supply and fix GI tubing heavy grade 50/40 mm dia with all fitting inside the fountain including suitable support made of GI pipe Heavy grade,Flange nut bolt , bend, wherever required . Note The Cost of fixing of nozzle given in schedule in pipe and make holes for fixing of nozles and welding of pipe and fixing in ground support of pcc and making circular,Hose nipple 50/40 mm dia , nozzle on pipe and bending of pipe shall deemed to be included in the unit rate of item

M/S JAINENDRA KUMAR JAIN (BID ID -3256874)

Bidder Name

M/S JAINENDRA KUMAR JAIN

Shri Sai Enterprises