SPECIAL REPAIRS TO WATER SUPPLY PIPE LINE FROM PARADE GROUND PUMP HOUSE TO CDO WING OF HQ JL WING, PROVISION OF 27 X WATER COOLERS FOR THE MLIRC AND PROVN OF CERTAIN REVENUE AND MINOR WORKS UNDER GE I BELGAUM

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5m depth and getting out in soft/ loose soil all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in hard/ dense soil all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and directed.

S&F 15mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in floors all as specified and directed.

S&F 20mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in trenches/ floors all as specified and directed.

S&F 25mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in trenches/ floors all as specified and directed.

S&F 40mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in trenches/ floors all as specified and directed.

S&F 50mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in trenches/ floors all as specified and directed.

S&F 15mm bore bib taps, brass CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F 15mm bore stop valves, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.

S&F 15mm bore stop valves, brass CP, fancy type, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.

S&F 25mm bore stop valves, brass CP, fancy type, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.

S&F 25mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed all as specified and as directed

S&F 25mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.

Cutting existing 100mm bore cast iron/ ductile iron pipes in position for making branch connections or for insertion of sluice valves, bends, collars, reducers, etc. all as specified and as directed. Note: Excavation, earth work, cast iron fittings, sluice valves and joints shall be measured and paid separately under relevant items of this Schedule.

M&L for 15mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls, ceilings with PVC batten holders or laid in trenches/ floors all as specified and as directed.

All as described in item No. 17 but 25mm bore UPVC pipes

M&L for cutting existing 50mm bore GI pipes for addition/ alteration/ repairs and provision of new GI union, GI nipple and GI sockets including necessary screwing or lengthening the screw of GI pipes to form connector all as specified and as directed. Note: Excavation, earth work and taking down GI pipes shall be measured and paid separately under relevant items of this Schedule.

M&L for 2000 litres capacity rotational moulded polyethylene (HDPE) water storage tank, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position complete all as specified and directed.

All as described in item No. 20 but for 500 litres capacity rotational moulded polyethylene (HDPE) water storage tank

Taking down existing unserviceable HDPE pipes of 100mm bore alongwith all fittings from trenches all as specified and as directed.

M&L for 100mm bore ductile iron pipes with spigot and socket ends, centrifugally cast, inside surfaces with cement mortar lining, ISI marked, Class K7, in any length, laid in trenches/ on ground/ on supports with tyton push-on joints as required all as specified and directed.

S&F ductile iron pipe fittings (spigot and socket type) such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, upto 250mm bore conforming to IS 9523 K-12 all as specified and as directed.

S&F CI/ GI bulk water meter, enclosed type with metallic gears and flanged ends, conforming to IS 2373, suitable for 50mm bore fixed to GI water supply line with necessary fittings including testing all as specified and as directed.

Supplying, installing, testing and commissioning of submersible pumpset of 20 HP/ 15 KW, 2850 RPM, 3 phase, 440 volts,12 LPS discharge capacity with 78m head, with starter and suitable capacity of MCB for short circuit protection including provision of 40 RM long submersible copper conductor cable of size 3 core x 6 sqmm drawn through and including PVC flexible pipe of suitable size all as specified and as directed. Make: KIRLOSKAR Model No. KS6F-2013R or equivalent approved make in KSB/

Supplying, installing, testing and commissioning of water cooler, storage type, fully stainless steel body, electric driven, single phase, 80 litres storage capacity and nominal cooling capacity of 40 litres per hour with 2 Nos. of cold outlets including connecting up water and electric connections all as specified and as directed. Make: VOLTAS/ BLUE STAR/ USHA

S&F voltage stabilizer for automatic operation, 1 KVA capacity, naturally air cooled, indoor type, 230 Volts, suitable for high/ low voltage corrections for an input voltage of 170 volts to 250 volts and for a stabilized output voltage between 230 volts with accuracy of (+) or (-) 2.5% all as specified and as directed. Make: V Guard Model VGMW 200 or equivalent model in Microtec/ Marvel

M&L for wiring with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 4 sqmm drawn through and 1100 volt grade including PVC casing and capping of suitable size with all necessary fittings and provision of one run of 4 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly complete all as specified and directed. Note: Two runs of 4 sqmm cable, one run of 4 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length.

S&F switch socket combination outlet, 15 Amps, 3 and 5 pin, 5 and 15 Amps, flush type, multipurpose including mounting on and including 2nd class HW board fixed on wall with sunmica top for mounting all as specified and directed.

S&F MCB DB SPN 2 Way without bus bar single door type complete all as specified and directed.

S&F MCB SPN 10A 10KA 'C' series 50Hz 240 Volts AC supply all as specified and as directed.

M&L for plain cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in foundation and mass concrete all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C0, using 12.5 mm graded stone aggregate and setting in CM 1:6 all as specified and directed.

M&L for plain cement concrete 1:2:4, Type B1 using 20mm graded stone aggregate as in platforms and the like including necessary formwork and finishing the exposed surfaces even and smooth without using extra cement all as specified and directed.

M&L for Reinforced cement concrete 1:2:4, Type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like all as specified and directed.

M&L for honey comb brick work with sub class 'B' bricks, one brick thick, straight or curved on plan, built in cement mortar 1:6 all as specified and as directed.

M&L for use of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200m thick (Horizontal or sloping), flat rough finished surfaces of concrete all as specified and directed.

M&L for use of form work to edges of concrete flats, treads, bands and similar works, for rough finished concrete surfaces, horizontal or sloping, exceeding 10cm but not exceeding 20cm wide all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed.

M&L for coloured non skid ceramic tiles, edge cut, 6 to 7mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors, skirtings, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 10mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for three coats of white wash on newly plastered walls, pilasters, cornices, etc. including necessary preparation of surfaces all as specified and directed.

ASHIRWAD ELECTRICALS

DHANSHRI ENTERPRISES

M/S MAHADEV M PATIL

M/s.GOODWILL ELECTRICALS