Provn of ceramic tiles Kota Stone bldg no T37 BLO Provn of Pol and Hygiene Chemical Store behind T44 bldg INHS Provn of Collapsible Grill door in main entrance First Floor of bldg No191 at COMCEN and Addn altn to railing at INWTC under GE Gomantak

Amount

Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises.

M&L 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base rough finished.

M&L for rendering 10 mm thick as backing coat in cement mortar 1:4 to receive dado/granite stone slab complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer of mortar for laying tiles in cement mortar 1:6 complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Virified Ceramic tiles light shade 10 mm thick(square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match light shade

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard rock all as specified and as directed

M&L for Pre-cast cement concrete type C1 (1:3;6) block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:4) complete all as specified and as directed.

soil filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M & L Hard core, broken to gauge n exc 63 mm for plinth protection/ under floor as directed by Engr in Charge.

M&L for PCC Cement concrete (1:2:4) type B2 as in foundations, filling and mass concrete all as specified and as directed.

M&L PCC Cement concrete type B-0, 1:2:4 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork etc

M & L rendering 15mm thick on block masonry surfaces in CM 1:4 to be finished even and smooth (without using extra cement) all as specified.

Supply & Fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

Supply & Fixing PVC valveless, syphonic action type, flushing cistern, 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or level, if any fixed in repairs including flush pipe.

Dismantling water tanks and removing to store of capacity exc 1000 & n exc 2000 ltr.

Supply & Fixing Stainless steel soap dish standard size heavy

M&L 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

Supply & Fixing in repairs Flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern

Supply & Fixing in repairs Vitreous China wash basin, white,ovel shaped back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets.

Supply & Fixing Pillar taps, 15mm dia, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs

Supply & Fixing PVC connections 15 mm size with PTMT nuts of length 600m fixed in repair.

Taking up or down steel tubing and connections, fixed to wall /floor

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/disintegrated rock all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock all as specified and as directed

M&L for Cement concrete (1:4:8) type D2 as in foundations, filling and mass concrete all as specified and as directed.

M&L for precast cement concrete block masonary with sold blocks in cement concrete 1:3:6,type C1 using 20 mm graded crushed stone aggregate exc 10 cm in width and set in CM 1:6 complete.

Returning/filling in layers and ramming in layers using excavated soil incl sprading,levelling,well ramming in layers not less than 25cm thick.

Removing excavated materials (soft/dis integrated rockl) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

M&L for rendering in cement mortar 1 : 4 (10+5)=15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement including mixing with liquid WPC on top 5mm thick only complete all as specified and as directed. Note :- Water proofing compound will be paid separately

M&L for rendering in cement mortar 1 : 6 ,10 mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for 3mm thick Birla white wall care putty on wall including preparation of new surfaces with necessary sand paper for applying two coats of distemper oil emlusion over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of new surfaces & applying two coats cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

S&F for roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings, MS pipe for post and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe- 290 (Gde E- 165).

M&L for Painting with two coats of synthetic enamel paint over red oxide priming Surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surface

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in ridge Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

Supplying and laying of 25 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 25 mm dia Gate valve with iron wheel head,screwed both ends for iron pipe and fixed

S&F 20 mm diameter Ball brass valves high pressure with polythene float screwed for iron pipe or brass ferrule and fixed as specified.

Supplying and laying of 15 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply & Fixed concelead CP stop cock/angle cock 15mm dia, fancy type with capston heads screwed both ends for iron pipe or for unionscomplete all as specified and as directed

Supply & Fixed Bib taps, 15mm dia, cast copper alloy, fancy type, with capston head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

M&L Hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface

Material & Labour for 100 mm thick PCC type D-2, 1:4:8 (using 40 mm graded aggregate), as in sub base of floor. all as specified and directed by Engr in charge.

Material & Labour for 100 mm thick PCC type B-2, 1:2:4 (using 40 mm graded aggregate), as in flooring. all as specified and directed by Engr in charge.

M&L 50mm thick sand filling under floors or in foundations including watering and consolidation

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment all as specified and directed by Engr in charge.

M&L Providing RCC precast cement concrete in shelves set in cm 1:4 type C1 1:3:6 (20 mm aggregate ) complete all as specified and directed.

M&L for TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

S&F aluminium alloy anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of approved make complete all as specified and as directed.

S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts exc half brick wall but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid in any mortar and rubbish off the premises complete all as specifie and directed.

Hacking out old broken glass exc 1.5 Sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 20mm thick Makrana white marble machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing of type complete all as specified and directed.

M & L 15 mm thick rendering on fair faces of concrete in CM 1:6 finish the surface even & smooth without using extra cement complete all as specified and directed

M&L for Preperation of newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of wall primer on wall surfaces complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc 10cm width or girth and applyine one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided

Demolition of Brick work or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlarfacings, dressed stonework and precast concrete articles all as specified and directed by Engr in charge.

Excavating in post holes (Or similar)( Hard dence soil) each n exc 0.50 Cum getting out returning filling in and ramming earth or broken rubble mixed with each around, in layers n exc 25 cm watering and removing surplus soil to a distance exc 50 m and making good surface.

M&L for Preperation of new plastered wall surface and applying two coats of white wash .

M & L for PCC 100mm thick 1:3:6 type C2 using 40 mm graded aggregate

Material and labour for light/fan point wiring complete as specified with 1100 V grade 1.5 Sqmm two runs of single core PVC insulated unsheathed multistranded copper conductor cable FRLS grade, conforming to relevant IS, drawn through and including steel conduit (ISI Marked) with all accessories concealed in wall , ceiling, including sunk pressed steel terminal boxes made out of 2 mm thick MS sheet concealed in walls with 3 mm thick laminated Hylem sheet top cover fixed with brass screws for housing switches, socket, regulator etc including one run of 1.5 sqmm single core PVC insulated and unsheathed copper conductor cable FRLS grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge.

All as per item No 75 here-in-before but for 2 in 1 three pin socket outlet 15/25 Amps on independent board with 4 Sqmm cable FRLS copper conductor multistranded including 4 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire all as specified and directed by Engr-in-Charge.

Supply & Fix Flame proof switch & socket plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified.

Supply and fix in replacement of ceiling rose surfaces bakelite 65 x 50 mm three terminals including supply and fix PVC plate or square blocks.

Supply and fix in replacement of SPN DB 8 way double door with 200 amps rated bus bar with all fixing material all as directed. Make- Havells/Legrend/L&T.

S & F in replacement of MCB SP 240 Volts, 6 to 32 Amps complete all as specified and directed.

S & F in replacement of MCB SPN, 240 Volts,63 Amps complete all as specified and directed.

M&L in replacement of sub main wiring with 2 runs of 10 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including suitable size of steel conduit medium grade fixed to the surface of walls/ ceiling as per IS and one run of 10 sqmm size PVC insulated copper conductor complete all as specified and directed.

Supply & Fixing in replacement of flame proof 2X16/20 watt LED tube light fitting with IP65 protection complete with all accessories ,internally pre-wired including conecting up with suitable size three core FRLS copper conductor including taking down old fitting complete all as directed .

Supply and Fixing of flame proof rotory switch in LM-6 enclosed in and including aluminium body enclosure with threaded cover with toggal action switch operated by a shrouded knob single pole, 10 Amps with double entries through way suitable for 20mm dia ERW threaded rigid steel conduit and 01 No MS plug of 20 mm including taking down of old fitting complete all as directed.

Supply & Fixing in replacement of flame proof 40 watt LEDbulk head fitting with IP65 protection complete with all accessories ,internally pre-wired including conecting up with suitable size three core FRLS copper conductor including taking down old fitting complete all as directed .

M & L in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

S & Fin replacement of GI earth strip of size 20x4 mm , earth strip fixed with insulator on wall complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil taking down UG cable any size.

Supply and fix for DWC high density polyethylene pipes of dia size 50mm, having outer side wall corrugated and inner surface plain confirming to IS 14930 (Part-I & II) for protection of underground cable laid in trenches/floor/fixed on pole/wall including all fittings and clamps as required complete all as specified and directed.

Supply & fixing UG LT cable XLPE insulated armoured heavy duty 1100 volts grade with aluminium conductor multistandardedof size 10 sqmm 2 core including centre gland, lugs, jointing materials etc laid in trenches/floor or fixed it to wall and taking down old unserviceable cable.

Supply and fix GI tubing (light grade) with all fittings,laid in trenches/road, or fixed along with walls /poles,bore of pipe 40mm all as directed by Engr-in-Charge.

Supply and fix GI tubing (light grade) with all fittings,laid in trenches/road, or fixed along with walls /poles,bore of pipe 25 mm all as directed by Engr-in-Charge.

Cutting of existing road/PCC/RCC/Hard standing for laying of cable/pipe including making good the disturbed surface to match with the adjoining surfaces with PCC 1:3:6 C2 complete all as specified.

Taking down shutters of any description exc 1sqm but nexc 2.00 sqm each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws etc complete all as specified and directed.

M/S jvsr constructions

STAR FABRICATION

M/s Gayatri Contruction Co.

M/S DUBAL CONSTRUCTION

JINTECH

SHIVRAJ CONSTRUCTIONS

M/s Abhay Enterprises

K M SUBHANAIAH

Paulraj Painters And Civil Engineering Contractors

M/S Kartik Enterprises