GE(S)/M-53/2020-21

Amount

M&L for 10mm thick rendering on faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including taking down cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on brick work or concrete surfaces in patches, finished even and smooth without using extra cement including taking down existing cement plaster, hacking for key, raking out joints, scrubbing down with water etc, including debries complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying 2mm thick wall care putty to receive true smooth surface and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls by scrapping down smoke, roots, moulds, salts and treading oil and greasy spots with wire brush and applying one coat of white wash, over a coat of antiefforescence wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling by scrapping down smoke, roots, moulds, salts and treading oil and greasy spots with wire brush and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by scrapping down smoke, roots, moulds, salts and treading oil and greasy spots with wire brush including removing all nails & washing down and applying one coat of oil emulsion distemper, white or tinted, over a coat of antiefforescence wash complete all as specified and directed.

M&L for preparation of old steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for preparation of old wood or wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for additional one coat of oil emulsion distemper on walls, complete all as specified and directed.

M&L for additional one coat of white wash on walls, complete all as specified and directed.

M&L for preparation of old wall surfaces of any description after complete removal of existing treatment from walls and making the surface smooth by applying 2mm thick wall care putty to receive smooth surface and applying two coats of oil emulsion distemper, white or tinted, over a coat of primer complete all as specified and directed.

S&F "as in repair" factory made 18mm (+ 0.7mm) thick coloured PVC sheet one side prelam sheet for cupboard shutter of density 600 kg/Cbm bent 90° and finish at all edges at level for making edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape etc, complete as per direction of Engineer-in-Charge and manufacturer's specification.

S&F "as in repair" factory made 12mm (+ 0.7mm) thick coloured PVC sheet one side prelam sheet for cupboard shutter of density 600 kg/Cbm bent 90° and finish at all edges at level for making edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape etc, complete as per direction of Engineer-in-Charge and manufacturer's specification.

S&F 20'' long telephonic slider to facilitate drawer slide of steel ball bearing fixed with SS screws, complete all as specified and directed by Engineer-in-Charge.

S&F Auto hinges for cabinet case, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (when open) 40mm, complete all as specified and directed.

S&F 100mm size hasp and staple, aluminium anodised, safety type, fixed with SS screws, complete all as specified and directed.

S&F 50mm dia polished hardwood knobs, fixed with screws, complete all as specified and directed.

S&F magnet ball catcher for cupboard shutter, complete all as specified and directed.

S&F as in replacement ball valve, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for 25mm bore iron pipe and fixed (minimum weight 25mm-455 gms), complete all as specified and directed.

S&F in replacement PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or Rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or Rectangular), area of each tile exc 0.18 Sqm but not exc 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles (in different colour combination as approved by GE) of size 450mm x 350mm x 7mm thick as on vertical surfaces such as skirting, dados and riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for marble work (Green / Black marble Bhaislana Zebra) 10-15mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:6 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edege full round, including dismantling existing stone incl. bedding layer, including removal of debries, complete all as specified and directed.

M&L for 15mm bore tubes 'medium grade' galvanized, ISI Marked with all fittings, short pieces and fixed complete to walls, floor, ceiling etc. including taking up or down existing steel water tubing and connections including cleaning for refixing or romoval to store, complete all as specified and directed.

S&F in replacement Vitreous china wash down water closet pan 'pedestal pattern', white (excluding flushing cistern and flush pipe but including fixing thereof) including making connection to trap and to flush pipe including plastic seat cover closed pattern with stainless steel or aluminised hinging device, complete all as specified and directed.

S&F in replacement ovel type counter top Vitreous china wash hand basin, white, size 550mm x 400mm including 32mm bore CP waste coupling and 32mm dia flexible waste pipe including fixing of tap, complete all as specified and directed.

S&F in replacement vitreous china, squatting Pan 'Orissa' pattern, white, size 580mm x 440mm with CI 'P' or 'S' trap, front or back with integral footrest of any pattern including provision of cement concrete 1:2:4, type B-1 bedding, connecting to drain out pipe and to flush pipe and to flush pipe to anti syphonage pipe etc. including making good to disturbed floor where required, complete all as specified and directed.

S&F in replacement 15mm bore chromium plated, fancy type angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in replacement 15mm bore bib tap chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in replacement 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy, chromium plated, high pressure, ISI Marked, complete all as specified and directed.

S&F 15mm bore chromium plated brass central hole single lever WHB mixture, for mixing hot and cold water with 450mm long braided house 20 cartriage size, screwed down, high pressure, screwed for iron pipe, complete all as specified and directed.

S&F in replacement tubular towel rail, CP, brass, 24" size, fixed with SS screw and rowel plug, complete all as specified and directed.

S&F in replacement 'D' type, single piece, tubular towel ring, CP brass, 150mm dia, fixed with SS screw and rowel plug, complete all as specified and directed.

S&F in replacement corner glass shelf assembly, quarter round with CP brass bracket, complete all as specified and directed.

S&F in replacement health foucet hand shower 8mm dia, 1mtr long flexible pipe, wall hook, complete all as specified and directed.

S&F in replacement PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement Stop valve concealed type, cast copper alloy (ISI Markd), fancy type, chromium plated with long shank and cup screwed down, high pressure with capstan head screwed both ends for iron pipe 15mm bore, complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) bend with oval accessed door, any radius, complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm and n. exc. 2Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each and refixing in the same opening after repair, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or fixed with beading / glazing pins in square not exc 0.5 Sqm in each pane, including hacking out old broken glass of any thickness, size, quality or description from wooden frame glazed with putty or fixed with beads, complete all as specified and directed.

S&F as in repair 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35mm thick puff (poly urathane foam) insulation with minium density 40kg/cum, filled in between two HDF sheets of thickness 3.2mm both & border covered with 10mm thick PVC sheet as per Drawing No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011, complete all as specified and directed.

S&F as in repair 35mm thick single piece factory made wire gauge door shutter and including of wire cloth (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S. tube 19 SWG, size 19mm x 19mm complete in all respect with lock rail & beautified by PVC beading all around, fixed with PVC solvent cement, complete as per Drawing No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed, complete all as specified and directed.

S&F anodised aluminium barral tower bolt of extruded section 200mm size, complete all as specified and directed.

S&F anodised aluminium handle, cast type, 125mm size, complete all as specified and directed.

S&F in replacement 20mm bore stainless steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type brackets, funnels, knobs etc, complete all as specified and directed.

S&F in replacement MS helical door spring 150mm size, fixed to steel frame, complete all as specified and directed.

M&L taking down carefully existing rain water spouts of any description on bricks or concrete surface and refixing the same using PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) in new location including cutting hole making good to disturbed surface complete all as specified and directed.

S&F 50mm dia GI light grade rain water spout 750mm long on brick or concrete surface using PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) including cutting hole making good to disturbed surface complete all as specified and directed.

S&F as in repair mild steel cold rolled 100mm long butt hinges, fixed to pressed steel frame complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal of debries complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on brick work or concrete surface of sunken floor, finished even and smooth using WPC @ 0.200 ltr per 50 Kg of cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of BOQ.

M&L for bitumen blown any grade, applied hot, two coats to concrete / plastered surfaces at the rate of 1.5 Kg per Sqm per coat and applying polythene film black 50 micron, complete for sunken floor slab and embedded in side wall / covered fillet, complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in benching, roof pedding and sunken portion, rounded and chamfered on edges, complete all as specified and directed.

M/S BHOTO AND CO

abrol enterprises

Ravinder Singh

Walia trading co

vivek and co