Fire Hydrant System for Sub Divisional Judicial Court Building north Salmara Abhayapuri at Bongaigaon

Amount

Supplying & Installation of elctric motor driven jockey pump of caapcity 180 LPM of 80 M head complete with MS Base plate base channel cpupling guard cushy foot monting, foundation bolts etc and also inlcuding 3 phase Motor of 415 volts of required JP/KW ( wirth + 10%) variation 3 phase 2900RPM, TEFC Motor mounted on common Base Frame complete with all accessories ( Pump Make KIRLOSKAR or EQUIVALENT KIRLOSKAR/ CROMPTON GREAVES MOTOR OR equivalewnt

Supplying & Installation of elctric motor driven fire pump of capacity 2280 LPM of 80 M head complete with MS Base plate base channel cpupling guard cushy foot monting, foundation bolts etc and also inlcuding 3 phase Motor of 415 volts of required JP/KW ( wirth + 10%) variation 3 phase 2900RPM, TEFC Motor mounted on common Base Frame complete with all accessories ( Pump Make KIRLOSKAR or EQUIVALENT )

Supplying & Installation of Diesal Engine driven stand by fire Pump of caapcity 2280 LPM of 80M head, including supply, installation testing, commissioning of required HP /MHP Diesel Egine with coupling and coupling guard M.S Base plate/Base Frame, Cushy foot mounting, foundation Bolts, including 200 Fuel Tank 12 V-21 plate battery and Silencer Make - KIRLOSKAR PUMP / KIRLOSKAR

2- Outgoing 63 A TPN Switch fuse unit with 30/SA CTs (3 Nos) with starter switch and ammter as apare feeder2- Outgoing 32A TPN Switch fuse unit with 30/SA CTs (3 Nos) with starter switch and ammter as apare feeder 2. Outging 32 ADP switch unit HRC fuses 1 Ganger board. 1- Danger Board 1. Continuous 40 x 6 mm tinnef coper earth bus with earthing teriminal.

Providing erection testing & Commissining of Pressure switch

Providing erection testing & Commissining of Pressure gauge 100 mm dia ( 0.10 Kg/cm2)

Supplying installation & testing of GI Earth setation ith perforated 40 mm dia and4.50 Metre long heavy GI pipe with necessary 40 mm dia GI fitting such as Socket Tee Elbow, nipple and 50 mm x 40 mm GI reducing socket for funnel inldudinig loacking arrangement 300 mm x 300 mm x 6 mm hings cover C I earth plate compete with dinging of earth pit construction of brick work

Extra for using salt 5 Kg and Charcoal 64 Kg in pipe Earth station pit to prove low ionpedance ground in ocatin of high soil resistivity as as when required and speciifed

Supplying and laying of following size PVC /XLP insulated and PVC sheathed 1.1 KGG Solid Amulinium conductor up to 10 Sq mm balance stranded conductor XLPE insulated Cores laid up PVC tape inner sheatyeded Armoued ( Aluminium for single core up to 70 Sq mm balance Aluminium strip Galvanisd fpr cable up to 2 x 10 sq . mm 3 x 10 mm, 4 x 6 sq mm balance all galvainised steel strip) Extruded PVC type ST2 sheated 650/1100 V grade as per IS 798 ( Part -1) 1988 armoued UG cable UG cable laid ground including exvation of cable up to depth of 75 m a) 120 sqmm x 31/2 core

b 70 mm sq mm x 31/2 core

c) 16 mm xsq. Mm x 31/2 core

Siring for circuit / submain wiring along with earth wire the following sizes of FRLS PVC indulated copper conductor single core cable in surface/ recessed stel conduit as required 4 x 2.6 sq. mm x 2 x 2.5 sq. mm earth wire

4 x 10 sq. mm x 2 x 6 sq. mm earth wire

Providing erection testing commissioning of caste iron Foot valve/ Stainer condirming to IS 4038/1538 complete with flanges, nuts bolts and washer etc. as required ( Make -Koley/ Kalpana/ Audoc) a) 150 NB

Supplying & fixing Caste iron body Butterfly Valves with matching fnges rubber inserting, nuts, botsd and waher etc. ( IS 13095) of following size complete as required ( Make-Koley/ Kalapana/ Audoc) a) 150 NB

Supplying & fixing Cast iron body Non Return valves complete with matching flanges rubber inserting nuts bolts and washer etc. ( ( IS: 5312) of following sizes complete as required ( Make Koley / Kalpana/ Audoc)a) 150 NB

Providing fixing testing & Commissining of Ball Vave a) 25 NB

Providing ficing Testing & Cmmissioning of Air Release Valve 25 mm dia

Providing fixing testing & Commissioning of Single headed Gun Matel ISI Marker Oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet & 63 mm dia Instantanceous type female outlet complete with Cap and Chain twist release lug and all accessories as per IS 5290-1983 ( Type A) and specification compete as required ( MAKE-ESSEL/NEWAGE/SWATI ISI Mark)

Providing RRL Hose with ISI Marked ( IS-636) 63 mm dia x 15 M Long complete with instantaneous type Gun Matel 63 m dia ISI Marked male & femal couplinges ( IS: 903) bound & riveted to hose pipes with copper rivets and copper wire complete as required ( MAKE - NIRMAL RUBBER/ NEWAGE)

Providing & fixing of weater proof hose cabinets fabricate from 16 SWG S sheet with centre opening full front glass door and locking arrangement uitable to accomodated one landing valve (Yard Hydrant) 2 Nos 15 M Long hose and 1 No Branch pipew with nozzle. The cabinate shall be painted with one coat of primer ad 2 or more coats of synthetic enamel paint of approved 900 x 600 x 450

Providing & fixing Gun Matel 63 mm dia Short Branch pipe 20 mm dia nozzle, ISI marked ( IS 903) complete as required MAKE - ESSEL/WINCO/ NEWAGE

Supplying Installation & testing Commissioning of Fire Aid Hose Reel Drum with 30Mtr ong rubber hose and GM shut off nozzle 25 mm dia Gate Valve, Union pipe complete set confirming to IS 884

Providinig & fixing of Gun Matel Fire Brigade Connection FCV 4 way (withdrawal connecting head) consisting of 63 mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS :904-1943 complete as required MAKE ESSEL/SWATI/NEWAG

Providing & fixin of Gun Matel fire Brigade 4 ways wsuction hose coupling ( draw out connection) with nut for female coupling as per IS 902-1974 complete with 150 mm dia GI suction pipe and foot valve ( to be connected to static Tank) complete as required ( Make : Self Fabricated)

Provioding fixing T esting & Commissioning of Mild steel Black pipe ( IS 1239 Part -I) Medium Class including cutting crewing welding etc and providing all fittings viz forged steel screwed fittings up to 50 mm dia and bolt welded above 50 mm dia flanges bends, tees, reducers elbow clamps hangers etc. including cutting holes and chases in brick or RCC walls / slabs and making good the same to the approval of Engineer-in-charge / consultant complete including painting with one coat of primer and two or more coats of synthetic enamelpaint of approved make and shade including steel work complete as required MAKE -TATA a) 200 NB

Suppying and placing Cylindrical verticalclaused top (PCVC) tank of Sintex/Polycon/ Patton make over the stagging the man holecover with loacking and cleaning arrangement inlcuding providing pads of size as requred for inlet and outlet pipe Primary Tank PVC 500 Ltr Capacity

Tank Nipple 25 NB

M.S Structural Materials

Supplying Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built pressure Gauge to know the Readyness of the Extinguisgher squeeze Grip Handle As per IS 15683 with ISI Mark ( 06 Capacity) Brand Firestop)

Supplying Installation, Fixing of Carbon dioxide fire Extinguisher confirming to IS :15683 with ISI Mark ( 4.5) Kg Brand - Firestop)

Supplying Installation, Fixing of Foam S/P type 9 Ltr Caapcity Fire Extinguisher complete in all respect with ISI Mark IS 15683 Brand Firestop Fire Alarm system

Supplying Installation Testing & Commissioning Mircoprocessor based Fire alarm control panel suitable for wall mounted type with audio visual indicatin Zone ie. Rectifitter and chrger circuit and Maintenance free battery of 2 x 12 volt with suitable Ampere hour Caapcity compete ( 12 Zone Panel) make - ( AGNI/ Morley or equivalent as approved by the Deptt.

Supplying Installation Testing & Commissioning Mircoprocessor based Fire alarm control panel suitable for wall mounted type with audio visual indicatin Zone ie. Rectifitter and chrger circuit and Maintenance free battery of 2 x 12 volt with suitable Ampere hour Caapcity compete ( 04Zone Panel) make - ( AGNI/ Morley or equivalent as approved by theDeptt.

Supplying Installation Testing & Commissioning of ionization type Smoke detector with mounting base make ( Appolo/Notifier/System cencer or equivalent as approved by the Deptt

Supplying Installation Testing & Commissioning of Manual Call Box made of M/S Aluminium dia cast with epoxy coated paint with hamer & Chain make- ( AGNI/Syatem Sensor or equivalent as aproved by the Deptt.

Supply installation Testing & Commissioning of Fire Alam Hooter audible range of 25 meter 80 bb output complete Make ( Agani/ System Sensor or equivalent as approved by the Deptt.

Supplying & fixing of 2 x 1.5 sq. mm PVC insulated copper Armoured Cable on surface / recess/ above false ceiling etc. as required ( ISI marked)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge.All kinds of soil

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately)Kiln seasoned and chemically treated hollock wood 35 mm thick shut

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick : Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250 x 16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200 x 10 m

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125 mm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead :

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia nominal bore

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

40 mm nominal bore

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions

Mrinmoy Kumar Das

BIPUL CH. DAS