SPECIAL REPAIR TO BOUNDARY WALL AT NARAINA CAMP UNDER AOR OF GE (AF) FARIDABAD

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed .

M&L for Brickwork with sub class 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mrotar (1:6), complete all as specified and directed.

All as per above item No 2 but except bricks.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed

M&L for rendering 15mm thick plaster in cement mortar (1:4) on of brick work or concrete surfaces, finish even and smooth without using extra cement including Water proofing compound as per user manual at any height, complete all as specified and directed. Note :- WPC will be measured and paid separately.

Supply only liquid water proofing compound, complete all as specified and directed

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement mortar 1:4 (1 cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement mortar 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping of 10mm nominal size) using white cement in place of ordinary cement in the top layer in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete all as specified and directed. Note :- Grooves shall be measured and paid separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove, complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

M & L for removal of existing treatment including preparation of old surfaces of wall and applying two coats of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.l as specified and directed .

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling, complete all as specifed and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris, complete all as specified and directed.

M&L for 75mm thick Plain Cement Concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base, complete all as specified and directed.

M & L for Pre-coated chequered tiles of size 300 x 300 x 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) over new or existing sub-base in floors, incl dismantling, complete all as specified and directed. Note :- colour and glazed of tile shall be approved by Engineer-in-charge

M&L for Plain Cement Concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in mud stops, rounded or chamfered on edges, complete all as directed all as specified and directed.

Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced), complete all as specified and directed.

Formwork to sides and soffit of rough finished flat surfaces of soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 6 mm to 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for plain cement concrete M-15 Nominal Mix (1:2:4) (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required, complete all as specified and directed.

Removing debris/excavated material/surplus spoil to a distance exceeding 1.5KM but not exceeding 5 KM and depositing where directed at a level n. exc 1.50 m above the starting point, complete all as specified and directed.

S&F Acrylic letters (English/Hindi) of size 300 mm in Length, 50 mm in width and 3 mm in thickness, fixed on wall surfaces or 3mm ACP sheets board of any description using stainless steel screws of suitable size or best quality adhesive including LED module rain proof lights fittings in each letters, complete, all as specified and as directed.

S&F in repair for 4mm Aluminium composite panel for Exterior wall panelling of any colour/design approved by Engr-in-Charge, inclusive of fixing on to wall/frame incl L-Corner, moulding end caps and sillicon filling and fixed with screws and other arrangement as required at site,complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

S&F Mild steel Framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Dismantling posts or struts (Steel or RCC) any section embedded in natural ground including taking out embedded portion in concrete, brick work or masonry and making good to disturbed surfaces complete all as specified and directed.

Dismantling of concertina coil of any size any description fixed on posts or angle of any kind, all as in fencing, complete all as specified and directed.

S&F in repair 6.0 to 8.0 mm thick polycarbonate sandwitch type sheets in semi circle shape on roofs of desired colour and fixed with aluminium metal flat / angle / tee sections including rubber beadings and silicon water proofing sealent gell for joining the sheets together and self tightening screws of reputed quality including dismantling old sheet complete all as specified and directed

S&F MS work as in post and strutt and fencing, drilled and countersunk for balusters running bars for doors balusters,noising to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts,posts and struts in fencing including cutting tops to shape as directed drilling hoes nothcing for wire etc flat iron fillets ( for securing wire mesh ) including all necessary drilling bolting or riveting etc. and similar work conforming to Fe - 290 Gde E - 165 as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc including dismantling old barbed wire complete all as specified and directed Note : Each line of wire shall be measured.

S&F for 900 mm dia concentrina spiral coil fencing with punched tape and 6m max openable length, on wall with angle iron Y shaped with 9 horizontal RBT reinforced barbed wire studied with GI staples and GI clips to retain horizontal incl necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of EIC, with reinforced barbed wire tape (RBT)/spring core (2.5 mm thick) wire of tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.47 gm/m, complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint), complete all as specified and directed.

Net contract sum will be after deducting Sch of Credit of Rs. 163715.00

MAA BHAWANI CONSTRUCTION (BID ID -3129993)

GIAN BUILDERS (BID ID -3135828)

SAGAR ENTERPRISES (BID ID -3138727)

RRR CONSTRUCTIONS (BID ID -3137092)

GLOBAL DEVELOPERS COMPANY (BID ID -3132705)

M/S GEETANJALI ENTERPRISES (BID ID -3132775)

M/S Yamin (BID ID -3127602)

H.B. Traders (BID ID -3131853)

R. S. Associates (BID ID -3135885)

Singh Associates (BID ID -3137130)