Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC | L1 | Accepted-AOC Technically qualified L1 bidder | |
| 2 | L2₹7.2 L+₹67,469.04 (10.3%)Rejected-AOC EAST KUSHAL NAGAR KAMRUP M GHY 21 ASSAM | KAMRUP | KAMRUP | ASSAM | 781021 | L2 | Rejected-AOC Technically qualified L2 bidder |
Tender Value
₹6.5 L
EMD Value
₹13,094
Closing Date
14 Oct 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CEO, GMDA
Bhangagarh, Guwahati-05
Nalinibala Devi Park at Guwahati Balance Work
2022_GMDA_27270_1
GMDA/DEV/67/2021/203
Open Tender
Construction Works
Item Rate
180 days
Guwahati
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
₹13,094
Yes
2 Jan 2023
1 Oct 2022
15 Oct 2022
1 Oct 2022
14 Oct 2022
2 Oct 2022
Amount
EARTH WORK: EXCAVATION, DISPOSAL, BACK FILL.
Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) Ordinary soil.
PLAIN CEMENT CONCRETE WORKS
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 4 sand :8 coarse aggregate by volume
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid seperately). (b) in prop 1cement: 3 sand : 6 coarse aggregate by voume
REINFORCED CEMENT CONCRETE
Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation,footing,columnswithbasetieandplinthbeam,pilecap,baseslab,retainingwalls,wallsofseptictank,inspectionpitandthelikeandotherworksnotless than 100mm thick up to plinth level. P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. b) M20 grade concrete or Prop. 1:1.5:3
REINFORCEMENT
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar
SHUTTERING
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work in:
Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank
Flat Surfaces such as soffits of suspended floors,roofs,landings,canteleverslabs,chajjas, balconies and the like. (ii) Using 25mm thick plank
TILES
Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).i) Of size 200mmx200mm and above
ACP CLADDING
Curatin Wall with ACP Cladding
INTERLOCKING BLOCK PAVEMENT
Providing and laying of interlocking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658- 2006 of thickness 80mm and 28 days compressive strength not less than 30N/m over a layer of bedding sand of compacted thickness 30mm , laid either in stretcher / running / herring bone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint fillings and to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.
FLOORING AND FLOOR FINISH
65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop.1:3:6 (1cement:3coarses and :6coarse aggregate of 25mm and down) and 15mm thick wearing layer in cement concrete inprop. 1:1:2 (1cement:1coarse sand :2coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish ([email protected] square metre of floor area) including curing etc. complete as directed.
PAINTING
b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.
DOOR FRAME & WINDOW
Providing fitting and fixing 1/3panelled 2/3glazed wooden shutters for doors/windows including oxidised iron butthinges(100mmx75mmx3.55mm) with necessay screws including glass panes(other fittings to be measured and paid separately) A) With Teak wood / Sissu wood. (i) 40 mm thick.
Providing, fitting and fixing factory made exterior type fully panelled single leaf door shutters of approved brand conforming to relevent I. S code having kiln seasoned and vacuum pressure treated Hollock/Bonsum/Sundi rail and styles with pannel of Anchor brand 12 mm thick veneered Teak wood particle board bonded with phenol-formaldehyde synthetic resin adhesive conforming to relevent I.S code including 4 nos of oxidised iron butt hinges (100mm x75 mm x3.55mm) to each leaf complete. (iii) 30mm thick
Providing, fitting and fixing steel windows/ventilators(openable)of standard rolled steel sections as perrele vantI.S.Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges(not more than 65mm and not less than 15mm wide)bolting device and steel handles,peg stays of 300mm long etc.complete as per drawing including applying a priming coat of red-lead paint.
Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8nos. of M.S. holdfast, providing closing/ holding device for 2nos. tower bolts of door for each side and 1no. for fitting and fixing Al drop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates).
ROOFING And ROOF TREATMENT
Providing Iron Plastic Laminated corrugated coloured sheet Roofing at all levels including fitting and fixing galvanised J or L hooks, bolts and nuts of 8 mm diameter with Bitumen washer 35 mm x 35 mm x 3 mm and G.I. Diamond washer 40 mm x 40 mm x 3 mm complete excluding cost of roof truss, purlins etc. (Roof trusses, Purlins etc. to be measured and paid separately). (c)0.60mm thick
GRILLS
Providing, fitting and fixing M.S.grill of required pattern for windows/clerestory windows/opening with M.S.flats at required spacing in frame all round,squre or round M.S. bars with round headed bolts and nuts or screws. II) Ornamental grill (b) Fixed to steel frames
Water Closet
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : A) W.C. pan with ISI marked black solid plastic seat and lid
Wash Basin
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: a) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Washroom Mirror
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
SOLING
Providing soling in foundation and under floor with stone/best quality picked jhamabrick, sandpacked and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.
MREEGEN SAHARIAH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .