Supply, Installation, Testing and Commissioning of street light poles and associated LED lighting fixtures along west side 7.5mtr wide road at INRP Site, Tarapur.

Amount

Supply of 70 Watt, IP66 rated LED street Light fixture ( Equivalent to Philips Make "BRP062 LED 84 CW SLC S1 PSU").

Installation, Testing and Commissioning of 70 Watt, IP66 rated LED street Light fixture ( Equivalent to Philips Make "BRP062 LED 84 CW SLC S1 PSU").

Supply of following items as per attached technical specification and drawing.

8mtr high Hot Dip Galvanized HR Steel Sheet (3 mm thick) Octagonal street light pole having bottom of 130 mm A/F, top 70 mm A/F.

Foundation Bolt Sets (Each set contains 4 numbers of foundation bolts)

Single Arm Bracket of arm length 1mtr

Installation of following items as per attached technical specification and drawing.

8mtr high Hot Dip Galvanized HR Steel Sheet (3 mm thick) Octagonal street light pole having bottom of 130 mm A/F, top 70 mm A/F.

Foundation Bolt Sets (Each set contains 4 numbers of foundation bolts)

Single Arm Bracket of arm length 1mtr

Supply of Power Cables upto working voltage 1.1 kV as per BIS: 7098 ( Part - 1 ) - 1998.

Power cable (2XWY (P)) of size 3.5C x 50 Sq.mm, Annealed Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988.

Power cable ( 2XWY ( P ) ) of size 4C x 16 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath FRLS of extruded PVC type ST2( P ) and ST2(Y), of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.

3C x 1.5 Sq.mm Unarmoured Copper Flexible cable (YY)

Underground Laying and Dressing of Power cables upto working voltage 1.1 kV as per IS 1255 - 1983.

Power cable (2XWY (P)) of size 3.5C x 50 Sq.mm, Annealed Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath of FRLS of extruded PVC type ST-2, of 1.1 kV grade as per IS 7098 (Part - 1) 1988.

Power cable ( 2XWY ( P ) ) of size 4C x 16 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath of FRLS of extruded PVC type ST-2, of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.

3C x 1.5 Sq.mm Unarmoured Copper Flexible cable (YY)

Supply of weather proof, Brass, double compression type cable glands suitable for cable of following sizes

3.5C x 50 Sq.mm, Multistranded, round wire armoured, XLPE insulated, Copper conductor

4C x 16 Sq.mm, Multistranded round wire armoured, XLPE insulated, copper conductor

Supply of Copper Lugs suitable for cable/ conductor of following sizes

3.5C x 50 Sq.mm, copper, Ring type

4C x 16 Sq.mm, copper, Ring type

3C x 1.5 Sq.mm, copper, Ring type

3C x 1.5 Sq.mm, copper, Pin type

Glanding and End Termination of power cable of following sizes

3.5C x 50 Sq.mm, copper

4C x 16 Sq.mm, copper

3C x 1.5 Sq.mm, copper

Supply and making of straight through cable Jointing kit of heat shrinkable type of approved make suitable for cable of voltage grade 1100V and for cable of size 4C x 16Sq.mm(2XWY)

Supply and embeddment of 40 mm dia. G.I. pipe (medium class) in pole foundation (during casting) separately for cable entry and cable exit including bending the pipe to the required shape complete as required.

Supply of 8 SWG stranded, flexible G.I wire for street light pole earthing.

Laying of 8 SWG stranded, flexible G.I wire directly burried in ground at minimum depth of 1000mm for street light pole earthing including end connection , etc as per instructions by Engineer-In-Charge.

Supply and embeddment of 25 mm dia. G.I. pipe electrode (medium class) for individual pole earthing.

Supply, Installation and Commissioning of Copper Earth Plate 600 mm x 600 mm x 3 mm thick of high grade quality including accessories and providing PCC enclosure with Chequered cover plate hot dip galvanised having lifting lug and locking arrangement and watering pipe of 2.7 metre length with charcoal / coke and salt as per IS 3043 standard, technical specification and drawing.

Supply and Assembling of Fibre glass reinforced Plastic mobile telescopic ladder with Type IA duty rating of height 25 feet as per the attached technical specification.

Excavation in all type of soils to a depth of 1000 mm below ground level, sand bedding, laying of baked bricks on side and top, back filling, dewatering, consolidation shoring, disposal of excess earth. Item includes Supply of river sand and class - 1 bricks.

Supply of RCC Hume pipe NP2 class (light duty) of size 250 mm dia

Providing, laying and fixing 250 mm dia RCC pipe NP2 class( light duty ) inclusive of road cutting of width 800mm and depth 1000 mm complete with RCC collars, jointing with cement mortar 1:2( 1 cement: 2 fine sand ), 100mm thick encasing the pipe with concrete of 1:2:4 grade, backfilling and concreting (1:2:4 ) with M30 grade of 200mm thick and as per the attached drawing.

Supply, Fabrication and Installation of Standard steel sections Hot dip galvanized as per grade B0 for cable support and chamber over. Fabrication shall include drilling, entitling, welding, wire brush cleaning, supply of all consumables like gas, welding rods.

Supply and Installation of Cable Route Markers with Tagging arrangement as per technical specification.

From 0 to 1.50 m depth from Average Ground Level.

From 1.50 m to 2.005 m depth from Average Ground Level.

Murum Filling under floors of specified thick in layers of not more than 150 mm thick including supplying required materials and consolidation etc. complete (Murum to be brought from out side campus of BARC)

Supplying, Stacking and Laying of 230 mm Thick rubble Soling stones as under Floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge.

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing curing etc. complete as per specification and drawings, but excluding the cost of form work shuttering, centering and steel reinforcement Up to PLINTH LEVEL complete.

Providing and laying in position Reinforced Cement concrete (RCC) OF Grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including Admixtures of approved Brand and quality (Plasticizer or super plasticizer) if required, including weigh batching, Mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. Complete but excluding the cost of centering, shuttering, and reinforcement complete as per specification up to Plinth Level (Cement Concrete M-30 Grade nominal size 20 mm metal.

Providing Reinforcement steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Using TMT Bars of specified Grades of all Sizes. TMT bars to be supplied by the contractor SAIL, RINL, JSW or TATA make only. Steel Supplied by the Contractor

Providing, centering, shuttering Form work by using steel plates, timber planks for all types of structures including necessary strurtting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels.

JAGGI ELECTRICALS

SARASWAT ENGINEERING SERVICES

Yogiraj Powertech Pvt Ltd.

SONU ELECTRICAL

RCK Electrical Enterprises

Prashant Electrical Enterprises

Power Automation and Controls

OM POWER SYSTEMS