Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-Finance 12 MAHIPUR 5 MAHIPUR NAWANSHAHR PUNJAB 144525 | SHAHID BHAGAT SINGH NAGAR | PUNJAB | 144525 | ₹3.6 L | L1 | Accepted-Finance Accepted |
| Sl No | Description | Qty | Unit | AJAY KUMAR L1 |
|---|---|---|---|---|
| 1.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a)1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | One Cubic Metre | 8,000 ₹8,000 Lowest |
| 2.00 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a)30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 7 | One Square Metre | 1,800 ₹12,600 Lowest |
| 3.00 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)250x16 mm | 3 | Each | 250 ₹750 Lowest |
| 4.00 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)200x10 mm | 3 | Each | 100 ₹300 Lowest |
| 5.00 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)125 mm | 6 | Each | 50 ₹300 Lowest |
| 6.00 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a)Twin rubber stopper | 3 | Each | 60 ₹180 Lowest |
| 7.00 | Providing and fixing 0.5mm thick aluminium sheet on wooden door shutter with screw, nails etc all complete as per direction of engineer in charge | 3 | One Square Metre | 650 ₹1,950 Lowest |
| 8.00 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 25 | One Kilogram | 130 ₹3,250 Lowest |
| 9.00 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. | 97 | One Square Metre | 80 ₹7,760 Lowest |
| 10.00 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : (a)In 75x75 mm deep chase | 94 | One Running Metre | 250 ₹23,500 Lowest |
Tender Value
₹3.6 L
EMD Value
₹7,293
Closing Date
22 Jul 2026, 6:00 pmClosed
Executive Engineer (Civil)
BSNL Civil Division Shradhapuri Phase-II, Meerut-250001
Essential Civil repair and maintenance works of T.E building at Shardhna in Meerut Operational Area.
2026_BSNL_917422_1
27/2026-27/TCD/BSNL/MT
Open Tender
Civil Works - Buildings
Item Rate
60 days
TE Bldg. Sardhana
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), O/o GMTD, BSNL Meerut
₹7,293
2 Sept 2026
15 Jul 2026
24 Jul 2026
15 Jul 2026
22 Jul 2026
15 Jul 2026
15 Jul 2026 - 22 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a)1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | One Cubic Metre | 218.6 | ₹218.6 |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a)30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 7 | One Square Metre | 293.4 | ₹2,053.8 |
| 3 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)250x16 mm | 3 | Each | 7,783.7 | ₹23,351.1 |
| 4 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)200x10 mm | 3 | Each | 6,050.65 | ₹18,151.95 |
| 5 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)125 mm | 6 | Each | 9,465.8 | ₹56,794.8 |
| 6 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a)Twin rubber stopper | 3 | Each | 7,719.65 | ₹23,158.95 |
| 7 | Providing and fixing 0.5mm thick aluminium sheet on wooden door shutter with screw, nails etc all complete as per direction of engineer in charge | 3 | One Square Metre | 702 | ₹2,106 |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 25 | One Kilogram | 10,391.4 | ₹2,59,785 |
| 9 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. | 97 | One Square Metre | 766.55 | ₹74,355.35 |
| 10 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : (a)In 75x75 mm deep chase | 94 | One Running Metre | 608.35 | ₹57,184.9 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.63 MB
BOQ_964106.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .