GE/CHM-13/2025-2026 WELCOME MAINT OF OFFRS MD ACCN IN SECTOR B UNDER AGE B/R II AT CHANDIMANDIR

Amount

Glazed coloured ceramic tiles in vertical surface 350mm x 250mm x 7mm /450mm x 350 x7mm thick, set and jointed in neat cement slurry over 10mm thick thick rendering in cement mortar 1:4, for receving the tiles, inlcuding dismantling of old tiles and removal of debries complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, inlcuding dismantling of old tiles and removal of debries complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, for floor finishes inlcuding dismantling of old tiles and removal of debries complete all as specified and directed.

Coloured vitrified ceramic tiles, light shade, 8-10mm thick (square ) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, including dismantling olf tiles and removal of debries complete all as specified and directed.

All as per serial item No 4 hereinbefore but on skirting / vertical surfaces laid over and including 10mm rendering in cement mortar 1:4, compelte all as specified and directed

Demolition of cement concrete (unreinforced) any description and in any position (below or above ground level), not otherwise specifically provide complete all as specified.

Plain cement mortar 1:3:6 (type C-2 using 40mm graded aggregate), 75mm thick as in Plinth protection , finishing cement concrete even and smooth without using extra cement, all as specified.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

Brick work with sub class ‘B’ bricks, old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4, complete all as specified & directed.

All as per serial item No 9 herein before but except bricks (using old serviceable bricks) –ditto-

Brick work with sub class ‘B’ bricks , straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed.

15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete surface of wall with mixing of WPC, finished even and fair without using extra cement complete all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.

10mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces)finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position, complete all as specified & directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including coat of primer on the surfaces, complete all as specified and directed.

Applying Two or more coats on new plastered surfaces of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Two coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed.

Dismantling of wall and ceiling board (timber, pulp execution etc) any thickness removing from site complete all as specified and directed

18-19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber/ aluminium frame work complete all as specified and directed.

6mm thick , 18-19mm thick wide wooden lipping on prelaminated boards fixed with headless nails to particle / timber frame work complete all as specified and directed.

Factory made 18mm thick solid WPC (Wood Polymer Composite) board of density 650 Kg /cum of one side prelaminated / rigidlam with any colour and other side balancing laminate as in cup board/ kitchen cabinet shutter/ drawer, front shuters, fixed with screws, solvent / adhesive, complete all as specified and directed.

Continuous (piano) hinges, mild steel bright finish, width of flap when open 40mm, fixed as in repair complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed.

Refixing of shutters of any description exceeding 1Sqm but not exceeding 2sqm each in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge

Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 type C1 in frame complete all as specified and directed.

35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge.

Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.

35mm thick of second class hard wood glazed and Skelton shutter open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc.; Size of members of shutters as specified in SSR Part 1, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

200 mm size aluminium anodized , barrel tower bolt of extruded section and fixed complete all as specified and directed.

100 mm size aluminium anodized , barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

Butt hinges 100mm long, of extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 , all as directed.

Material and labour for 150mm long aluminum handle cast type anodized ,fixed as in reapir complete all as specified.

100mm size aluminium handle (ISI Marked), cast type, anodised, fixed as in repair complete all as specified & directed by Engineer-in-charge.

Powder coated aluminium sections as in frames/ shutter of doors/window/ventilators /partitions, (Sliding / openable/ three track) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. fixed as in repair complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.

Powder coated aluminium Anodised aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron) , side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified

Supply only 4.8mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed.

Factory made steel windows , as in repair (Box type)primer coated with glazing bar and openable shutter prepared to receive sheet glass complete including cutting holes, (four Nos for each window) and making good dismantled portion in PCC (1:2:4) type B1 including following fittings welded to frame/ shutter complete all as specified. (a) Hold fast 150mm out of 25 x 6 mm flat iron bend to shape, 04 Nos each window (02 Nos on each side). (b) Handle of Z section 20mm x 25mm, 100 mm long -01 No each leaf. (c) MS tower bolt 150mm long, 02 Nos each leaf. (d) Z section 20mm x 25mm, 100 mm long stopper -01 No each leaf. (e) Cleat 55 mm long of hollow square section of 15mm x 15mm of 24 gauge thickness, welded to hinge of 55mm size, 01 No each leaf. (f) MS box type hinges of 75 mm size, 02 Nos per leaf. (g) Fabrication and fixing complete. Note: (i) MS flat iron fixing of wire cloth and window shutters shall be included in item rate.

Factory made box type steel ventilators, fixed type including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded, fixed in repairs, complete all as specified and directed.

3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.

5mm thick tinted sheet glass fixed to woodeb/ion/aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels n.exc 0.5 Square metre in each pane, complete all as specified & directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples, fixed in repair, complete all as specified & directed.

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples , complete all as specified and directed.

150mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.

Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.

Steel water tubes, 15mm dia bore, medium grade, galvanized, with and including all fittings and fixed complete to walls ceiling or laid in floors, Taking up down steel tubing and connections 15mm bore complete all as specified and directed.

Steel water tubes, 20mm dia bore, medium grade, galvanized, with and including all fittings and fixed complete to walls ceiling or laid in floors, Taking up down steel tuibing and connections 15mm bore complete all as specified and directed.

Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repair complete all as specified and directed.

Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.

PVC valve less syphonic action flushing type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat pedastal pattern , fixed as in repair complete all as specified & directed.

Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repairs, complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed.

Chromium plated jet for EWC for 15mm bore with fittings, fixed as in repair, complete all as specified and directed.

Wall mixer, mixer for mixing hot or cold water, chromium plated suitable for 15mm bore GI pipe or union, fixed as in repair complete all as specified and directed.

Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe

Wash hand basin, vitreous china, flat back , white of size 550X400mm, including brackets of suitable size, fixed as in repair complete all as specified and directed.

Bath cabinet of size 622mm x 422mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed.

25mm dia Harrison rails 20 mm size, mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed as in repairs complete all as specified.

Cast copper alloy, chromium plated towel rail 600mm long, fixed as in repair, complete all as specified and directed.

Chromium plated, fancy type shower rose without swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long, complete all as specified and directed.

Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915 x 460mm, bowl size 410x330x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repair complete all as specified and directed.

15mm bore angle valves, cast copper alloy, fancy type chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions, fixed as in repair all as specified and directed.

Stop valves , cast copper alloy screwed pressure, with crutch or butterfly handle, screwed both ends for iron pipes for unions and fixed 15mm bore, fixed as in repair complete all as specified and directed.

Bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair all as specification and as directed.

Plate rack of stainless steel sheet 1.0mm thick of size 610mmx 914mm x 254mm with steel shelves and hanging arrangements for utensil, fixed as in repairs, complete all as specified and directed.

Framed work such as grills, gratings, framed guard bars, walk ways, raillings, etc usingsteel confirming to Fe-290 fixed as in repair complete all as specified and directed.

PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints fixed to wall/floor including taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, fixed as in repair complete all specified and directed.

110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed

110mm bore PVC (SWR) junction single, (Single T), fixed as in repair complete all as specified and directed.

PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints fixed to wall/floor including taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, fixed as in repair complete all specified and directed.

75mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed

75mm bore PVC (SWR) junction single, (Single T), fixed as in repair complete all as specified and directed.

PVC (SWR) floor traps 75mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 (1:2:4), fixed as in repair complete all as specified and directed.

PVC (SWR) multi floor traps 75mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 (1:2:4), fixed as in repair complete all as specified and directed.

Preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and directed.

Complete removal of existing treatment of any type / descriptin viz distemper, white wash etc from plastered / un plastered surface of wall, chajjas, facia, cantilivers, RCC etc with mechanical means / grinder completely and applying two coats of oil bound distemper over and including one coat of interior wall primer including interior grade wall care putty (thickness vary from 1.5 to 2.5mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering, making the surfaces even and smooth complete all as specified and directed.

One coat of white wash on wall surfaces including preparation of old plastered or unplastered surfaces complete all as specified and directed

One coat of white wash on ceiling surfaces including preparation of old plastered or unplastered surfaces complete all as specified and directed

Preparation of old surfaces of ceiling and applying one coat of oil bound distemper, complete all as specified and directed

Preparation of old surfaces of ceiling and applying one coat of plastic emulsion paint, complete all as specified and directed

Preparation of old decorated wall surfaces by removing spoiled paint/scale dirt with wire brush or mechanical means/grinder including washing rubbing the surfaces and applying two coats of exterior emulsion paint as per manufacturer instruction complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

One coats of synthetic enameled paint on old steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed.

Preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed

18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 15mm thick screed in cement mortar 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Demolition of RCC water tank of capacity 300 ltr to 500 ltr, removing all the rubbish and making good the surface as per existing specification complete all as specified and directed

500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, fixed as in repair complete all as specified and directed.

1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, fixed as in repair complete all as specified and directed.

Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of 15mm dia and fixed in repair complete all as specified & directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes etc

PVC body magnetic shutter catcher for kitchen cup boards, fixed with standard steel screws, fixed as in repair complete all as specified and directed.

Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide primer including preparation of new surfaces complete all as specified & directed.

15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repair complete all as specified and directed.

Dismantling of plain or corrugate steel sheeting any gauge, thickness , including Naintal or similar patter roof coverings complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, cills, sunshades, shelves, lintels, etc,; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as directed.

rolled sections as in main and cross beams, coloumns, hip and jack rafters; purlins where connected to common rafters of angle, pipe sections etc complete all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of pproved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Treating efflorescence on walls upto 0.3mtr above the affected surface by using polymer based chemical of Dr Fixit or equivalent Treatment including taking down plaster, scrubbing & cleaning of surface properly and applying muriatic acid with water ratio 1:12, using a salt neutralizer before applying a water based efflorescence remover and finally sealing the surface with polymer based chemical to resist further damage

M/s Om parkash (BID ID -3306893)

Gunjan and Gunjan Associates (BID ID -3308418)

MS R G ENTERPRISES (BID ID -3302915)

chahalbuilders (BID ID -3302791)