At Gorakhpur-Proposed Renovation of PCOM, PCCM & PCE office.

Item Breakup - A-DSR-2021

thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.147D.4 Three track three panels sliding window with fly Sqm 162 9642.6 1562101.2 proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame

wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Total 3448959.65 Item- 5 All items of Sub Head-10.0 (Steel Work) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 10.0 STEEL WORK 10.1 Structural steel work in single section, fixed with Kg 2000 93.05 186100 or without connecting plate, including cutting, 1 hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and 10.16 applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 2 10.16.1 Hot finished welded type tubes Kg 6400 154.9 991360 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position 10.25 and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 5000 142.3 711500 3 brackets, gates and similar works Total 1888960.00 Item- 6 All items of Sub Head- 11.0 (Flooring) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount DYCE-GA-ENGINEERING/NORTH EASTERN RLY 11.0 FLOORING 11.37S CERAMIC GLAZED TILES 11.37 Providing and laying Ceramic glazed floor tiles of Sqm 75 935.6 70170 size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 1 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved 11.41 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ s q m including grouting the joints with white cement and matching pigments etc., complete. 2 11.41.3 Size of Tile 800x800 mm Sqm 2700 1879.95 5075865 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, 11.46 over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 3 11.46.3 Size of Tile 800x800 mm Sqm 270 1932.75 521842.5 Total 5667877.50 Item- 7 All items of Sub Head-12.0 (Roofing) of DSR-2018 S No. Item No Description of Item Unit Qty Rate Amount 12.0 ROOFING Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry 12.40 surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1 12.41.1 75 mm diameter Metre 36 213 7668 2 12.41.2 110 mm diameter Metre 36 319.75 11511 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.4 Single tee without door 3 12.42.4.1 75x75x75 mm Each 15 124.2 1863 4 12.42.4.2 110x110x110 mm Each 10 190.75 1907.5 12.42.5 Bend 87.5 degrees 5 12.42.5.1 75 mm bend Each 9 91.8 826.2 6 12.42.5.2 110 mm bend Each 9 132 1188 DYCE-GA-ENGINEERING/NORTH EASTERN RLY Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at 12.45 every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board Sqm 2000 1145.95 2291900 7 conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 12.50 Providing and fixing precoated galvanised iron Sqm 1000 671.55 671550 profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid 8 scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DYCE-GA-ENGINEERING/NORTH EASTERN RLY Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel 12.52 to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.52.3 12.5 mm thick square edge PVC Laminated Sqm 980 1948.95 1909971 Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the 9 face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. Total 4898384.70 Item- 8 All items of Sub Head-13.0 (Finishing) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 13.0 FINISHING 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 1 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 450 294.35 132457.5 Painting with synthetic enamel paint of approved 13.61 brand and manufacture to give an even shade : 2 13.61.1 Two or more coats on new work Sqm 375 131.45 49293.75 13.80 Providing and applying white cement based putty Sqm 6000 123.85 743100 of average thickness 1 mm, of approved brand 3 and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved 13.81 brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 4 13.81.1 One coat Sqm 9000 54.75 492750 5 13.81.2 Two coats Sqm 6000 90.05 540300 DYCE-GA-ENGINEERING/NORTH EASTERN RLY Applying priming coats with primer of approved 13.85 brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.91 Removing dry or oil bound distemper, water Sqm 15000 20.85 312750 proofing cement paint and the like by scrapping, 6 sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting with synthetic enamel paint of approved 13.99 brand and manufacture of required colour to give an even shade : 7 13.99.1 One or more coats on old work Sqm 300 86.55 25965 Total 2296616.25 Item- 9 All items of Sub Head-14.0 (Repairs to Building) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 14.0 REPAIRS TO BUILDING 14.75AS ROUTINE MAINTENANCE WORK 14.82 Dismantling W. C . Pan of all sizes including Each 9 110.7 996.3 1 disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25 degrees celsius, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The 14.90 vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23 degrees celsius as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150 degrees celsius. Cold flexibility shall be upto -2 degrees celsius when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 2 14.90.1 3 mm thick Sqm 5000 534.1 2670500 Total 2671496.30 Item- 10 All items of Sub Head-15.0 (Finishing) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING Demolishing brick work manually/ by mechanical means including stacking of serviceable material 15.7 and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 1 15.7.4 In cement mortar cum 15 1698.45 25476.75 Removing mortar from bricks and cleaning bricks 15.8 including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): 15.8.3 1000 4500 5522.25 24850.13 2 From brick work in cement mortar Nos. Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 3 15.12.1 Of area 3 sq. metres and below Each 75 302.7 22702.5 DYCE-GA-ENGINEERING/NORTH EASTERN RLY Taking out doors, windows and clerestory window 15.13 shutters (steel or wood) including stacking within 50 metres lead : 4 15.13.1 Of area 3 sq. metres and below Each 75 118.3 8872.5 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 5 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 2525 60.5 152762.5 15.52 Dismantling of flushing cistern of all types Each 9 744.6 6701.4 (C.I./PVC/Vitrious China) including stacking of 6 useful materials near the site and disposal of unserviceable materials within 50 metres lead. 15.56 Dismantling old plaster or skirting raking out Sqm 750 45.05 33787.5 joints and cleaning the surface for plaster 7 including disposal of rubbish to the dumping ground within 50 metres lead. 15.57 Dismantling aluminium/ Gypsum partitions, Sqm 450 46.5 20925 doors, windows, fixed glazing and false ceiling 8 including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. Total 296078.28 Item- 11 All items of Sub Head-17.0 (Sanitary Installations) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat Each 8 5540.55 44324.4 1 and lid Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. 17.5 brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. Each 12 10128.3 121539.6 2 automatic flushing cistern 17.5.4 Range of four half stall urinals with 10 litre P.V.C. Each 10 21880.95 218809.5 3 automatic flushing cistern Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.4 White Vitreous China Flat back wash basin size Each 10 1679.6 16796 4 550x 400 mm with single 15 mm C.P. brass pillar tap 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with Each 10 299.35 2993.5 flexible tube upto 1 metre long with S.S. 5 triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Providing and fixing P.V.C. waste pipe for sink or 17.28 wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe DYCE-GA-ENGINEERING/NORTH EASTERN RLY 6 17.28.1.1 32 mm dia Each 20 90.95 1819 17.31 Providing and fixing 600x450 mm beveled edge Each 6 1411.15 8466.9 mirror of superior glass (of approved quality) 7 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size 17.32 with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 8 17.32.4 Rectangular shape 1500x450 mm Each 6 1817.2 10903.2 17.74 Providing and fixing PTMT shelf 440 mm long, Each 10 607.05 6070.5 124 mm width and 36 mm height of approved 9 quality and colour, weighing not less than 300 gms. 17.81 Providing and fixing floor mounted, white Each 12 16100.4 193204.8 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres 10 with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Total 624927.40 Item- 12 All items of Sub Head-18.0 (Water Supply) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing 18.7 the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.- Internal work - Exposed on wall 1 18.7.3 25 mm nominal dia Pipes Metre 18 408.55 7353.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes 18.8 jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 2 18.8.1 15 mm nominal dia Pipes Metre 72 441.15 31762.8 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 3 18.49.1 15 mm nominal bore Each 18 434.2 7815.6 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 4 18.53.1 15mm nominal bore Each 45 500.35 22515.75 18.54S PTMT FITTINGS Providing and fixing PTMT stop cock of approved 18.55 quality and colour. 18.55.2 20 mm nominal bore, 89 mm long, weighing not Each 8 113.85 910.8 5 less than 88 gms DYCE-GA-ENGINEERING/NORTH EASTERN RLY Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 6 18.58.1.1 100 mm nominal dia Each 30 33.2 996 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing unplasticised P.V.C. 18.74 connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 7 18.74.2 15 mm nominal bore with 45 cm length Each 36 107.9 3884.4 Total 75239.25 Item- 13 All items of Sub Head-21.0 (Aluminium Work) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum thickness of Kg 1800 466.3 839340 1 powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever 21.1.2 required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum thickness of Kg 1200 564.8 677760 2 powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness (weight Sqm 300 1325.55 397665 3 not less than 12.50 kg/sqm) Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU 21.19 sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 4 21.19.1 Upto 5 mm depth and 5 mm width Metre 1000 130.2 130200 Total 2044965.00