Construction of security watch tower 3 nos and guard post 4 nos in factory areas,HAL Nasik*Civil works*

HINDUSTAN AERONAUTICS LIMITED AIRCRAFT OVERHAUL DIVISION, NASIK WORKS AND SERVICES DEPARTMENT

Name of work: Construction of Security watch tower (03 nos) and Guard post (04 nos) in factory areas, HAL, Nashik. (Civil works)

Tender No.:NK/FW/CAP-1601A/2024-25

NIT NO. : NK/FW/542/2024-25

Estimate Value : Rs. 149.08 Lakhs

PRICE BID/ COMMERCIAL BID PART-B

Name of the Tenderer:

Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

1 Removing the excavated surplus soil / material / dismantled debris including loading, conveying and depositing at a place at a distance upto 1KM from starting point as directed and spreading & levelling all as directed by EIC. 1340.00 Cum 146.03 Rupees One Hundred Forty Six and Two Paise Only 195673.50

2 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all complete and as directed by EIC. Note: This item will be paid only where no other item of excavation is paid. 585.00 Sqm 28.66 Rupees Twenty Eight and Sixty Six Paise Only 16766.39

3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches, drains or like (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts , including getting out the excavated soil and disposal of surplus excavated soil , within a lead of 50 m all complete and as directed by EIC. Note: Soil, if any, which is required for refilling shall be stacked at site as per the directions of EIC.

a) All kinds of soil 761.00 Cum 218.39 Rupees Two Hundred Eighteen and Thirty Nine Paise Only 166197.83

b) Ordinary rock 26.00 Cum 531.04 Rupees Five Hundred Thirty One and Three Paise Only 13806.94

c) Hard rock (Blasting Prohibited) 26.00 Cum 1277.82 Rupees One Thousand Two Hundred Seventy Seven and Eighty Two Paise Only 33223.39

4 Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift as directed by EIC. Note : Earth from excavation other than BC soil and rock. 52.00 Cum 164.45 Rupees One Hundred Sixty Four and Forty Four Paise Only 8551.34

5 Supplying, stacking and filling of excavated murum (including royalty) by mechanical transport in foundation, trenches, plinth, sides of foundation, floors ,etc in layers not exceeding 20cm including watering and ramming/ compaction with mechnical vibrator/roller each layer for all lift all complete and as directed by EIC. 395.00 Cum 587.71 Rupees Five Hundred Eighty Seven and Seventy One Paise Only 232146.83

6 Supplying and providing Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. 522.00 Sqm 260.13 Rupees Two Hundred Sixty and Thirteen Paise Only 135789.11

7 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : Plain cement concrete1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) including mixing, laying, curing, fininshing to level & line (All work up to plinth level) etc all complete as specified and as directed by EIC. 152.00 Cum 5715.16 Rupees Five Thousand Seven Hundred Fifteen and Sixteen Paise Only 868704.49

8 Providing Centering and shuttering for plain or reinforced cement concrete straight, horizontal, sloping as required including all cutting & waste, centering, bracing, strutting and removing the formwork after the retention period complete as specified & as directed for All work up to plinth level :

a) Footing, foundations, bases of column etc 181.00 Sqm 329.02 Rupees Three Hundred Twenty Nine and One Paise Only 59552.00

b) Columns, Pillars, Piers, Abutments, Posts and Struts 492.00 Sqm 806.52 Rupees Eight Hundred Six and Fifty Two Paise Only 396809.46

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers 248.00 Sqm 617.83 Rupees Six Hundred Seventeen and Eighty Two Paise Only 153221.67

d) Suspended floors, roofs, landings, balconies and access platform 546.00 Sqm 777.95 Rupees Seven Hundred Seventy Seven and Ninety Five Paise Only 424761.74

9 Providing and laying in position 1:1.5:3(1 cement:1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete, including mixing, placing in position, compacting, vibrating, curing, finishing the exposed surface of concrete smooth/hacked complete all as specified and as directed by EIC.(MS reinforcement and form work will be paid seperately).

a) All work up to plinth level 72.00 Cum 7589.23 Rupees Seven Thousand Five Hundred Eighty Nine and Twenty Three Paise Only 546424.64

b) Columns, pillars, walls above plinth level up to floor five level 24.00 Cum 9105.45 Rupees Nine Thousand One Hundred Five and Forty Four Paise Only 218530.70

c) Beam, suspended floors, roofs, balconies, shelves, lintels, chajjas, bands, plain window sills, staircases 96.00 Cum 9652.93 Rupees Nine Thousand Six Hundred Fifty Two and Ninety Two Paise Only 926680.87

10 Providing and laying in position TMT deformed MS reinforcement of grade Fe-500D, for R.C.C. work including straightening, cutting to required length, bending, hooking, cranking, placing in position and binding with MS wire (annealed) not less than 0.9 mm Dia. or securing with clips including necessary lapping, spacers/cover blocks complete all as specified and as directed by EIC. 17000.00 Kg 90.49 Rupees Ninety and Forty Eight Paise Only 1538262.00

11 Providing and laying, spreading and compacting stone aggregate 90 to 45mm to WBM specifications in uniform thickness, hand picking , rolling with hand compactor in stages to proper grade and camber, applying and brooming requisite type of screening/binding material sand to fillup interstices of coarse aggregate, watering and compacting to the required density all complete and as directed by EIC 55.00 Cum. 2634.50 Rupees Two Thousand Six Hundred Thirty Four and Forty Nine Paise Only 144897.44

12 Providing and constructing subclass 'B' Bricks , straight or curved on plan to any radius in half brick thick masonry in CM 1:4 above or below ground at any height and level using class B bricks including providing reinforcement if required and as directed by the engineer In charge, necessary scaffolding, curing complete as specified and as directed by EIC. (Brick of class designation 35kgf/cm2) 254.00 Cum 7922.95 Rupees Seven Thousand Nine Hundred Twenty Two and Ninety Five Paise Only 2012429.35

13 Providing and applying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. trowling, finishing to a smooth and even surface with straight edges, scaffolding, curing complete all as specified and as directed by EIC. 1095.00 Sqm 450.92 Rupees Four Hundred Fifty and Ninety One Paise Only 493752.25

14 Providing & applying 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall /concrete etc all complete and as directed by EIC 675.00 Sqm 425.04 Rupees Four Hundred Twenty Five and Three Paise Only 286899.77

15 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete etc all complete and as directed by EIC 480.00 Sqm 220.40 Rupees Two Hundred Twenty and Forty Paise Only 105793.78

16 Providing and applying 6mm thick cement plaster on ceiling in cement mortar 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and neeru finsih all complete as specified and as directed by EIC 480.00 Sqm 252.07 Rupees Two Hundred Fifty Two and Seven Paise Only 120995.42

14 Providing and Finishing walls with 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm etc. complete as directed by EIC. 1095.00 Sqm 152.07 Rupees One Hundred Fifty Two and Seven Paise Only 166520.92

18 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre etc., complete as directed by the EIC. 1155.00 Sqm 155.77 Rupees One Hundred Fifty Five and Seventy Six Paise Only 179910.42

19 Providing & applying painting with synthetic enamel paint on any surface of steel, wooden or plastered surface of approved brand and manufacturer of required colour to give an even shade : One or more coats on old work including preperation of surface remove dust, scrap with sand paper etc complete all as specified & directed by EIC. 100.00 Sqm 189.82 Rupees One Hundred Eighty Nine and Eighty Two Paise Only 18982.26

20 Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including ISI marked Stainless Steel butt hinges with necessary screws. 44.00 Sqm 2914.51 Rupees Two Thousand Nine Hundred Fourteen and Fifty One Paise Only 128238.46

21 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket, woolpile, lock, bearing wheel etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For Fixed portion - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) etc all complete as speified & directed by EIC 1100.00 Kg 415.34 Rupees Four Hundred Fifteen and Thirty Four Paise Only 456879.06

22 Providing & fixing 12 mm thick one side Pre-laminated particle board for cubboard shutters (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked. 20.00 Sqm 2695.40 Rupees Two Thousand Six Hundred Ninety Five and Forty Paise Only 53908.02

23 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) etc all complete as speified & directed by EIC 99.00 Sqm 1262.88 Rupees One Thousand Two Hundred Sixty Two and Eighty Eight Paise Only 125025.48

24 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 50.00 Sqm 951.03 Rupees Nine Hundred Fifty One and Three Paise Only 47551.68

25 Providing and fixing aluminium sliding door bolts of size - 300x16 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc all complete as speified & directed by EIC 76.00 Nos 254.42 Rupees Two Hundred Fifty Four and Forty Two Paise Only 19335.93

26 Providing and fixing aluminium handles of size 125 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc all complete as speified & directed by EIC 76.00 Nos 55.58 Rupees Fifty Five and Fifty Seven Paise Only 4223.97

27 Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100x60x2.50 mm (heavy weight) with stainless steel screws etc. complete : 114.00 Nos 89.23 Rupees Eighty Nine and Twenty Two Paise Only 10172.07

28 Providing and fixing aluminium tower bolts of size 200x10 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete as direceted by the EIC. 76.00 Nos 83.65 Rupees Eighty Three and Sixty Four Paise Only 6357.03

29 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete all as directed by the EIC. 38.00 Nos 824.85 Rupees Eight Hundred Twenty Four and Eighty Four Paise Only 31344.23

30 Providing and laying polished Granite stone Black, Cherry/ Ruby red or equivalent in flooring, steps, etc. of required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 47.00 Sqm 3759.74 Rupees Three Thousand Seven Hundred Fifty Nine and Seventy Four Paise Only 176707.91

31 Providing edge moulding to 18 mm thick Granite work, marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 156.00 Rmt 428.68 Rupees Four Hundred Twenty Eight and Sixty Seven Paise Only 66874.06

32 Providing and laying Ceramic glazed floor tiles antiskid of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., all complete and as directed by the EIC. 61.00 Sqm 919.99 Rupees Nine Hundred Nineteen and Ninety Eight Paise Only 56119.22

33 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as directed by the EIC. 189.00 Sqm 1063.79 Rupees One Thousand Sixty Three and Seventy Nine Paise Only 201057.18

34 Providing and laying vitrified floor tiles in different sizes of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete all as directed by the EIC. 321.00 Sqm 1303.33 Rupees One Thousand Three Hundred Three and Thirty Two Paise Only 418367.36

35 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

A)75 MM 84.00 Rm 208.74 Rupees Two Hundred Eight and Seventy Four Paise Only 17534.29

B) 110 MM 84.00 Rm 316.64 Rupees Three Hundred Sixteen and Sixty Four Paise Only 26597.89

36 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

a) 15mm dia. 127.00 RM 205.31 Rupees Two Hundred Five and Thirty Paise Only 26073.89

b) 25 mm dia 350.00 RM 298.18 Rupees Two Hundred Ninety Eight and Seventeen Paise Only 104362.34

C)50 mm dia 350.00 RM 666.37 Rupees Six Hundred Sixty Six and Thirty Six Paise Only 233229.15

37 Providing and fixing PTMT bib cock of approved quality and colour, 15mm nominal bore, 86 mm long, weighing not less than 88 gms all complete and as directed by EIC 22.00 Nos 105.39 Rupees One Hundred Five and Thirty Eight Paise Only 2318.48

38 Providing and fixing 15mm dia, 86mm long PTMT stop cock of approved quality and colour all complete and as directed. Minimum weight of stop cock shall not be less than 88 gms etc., complete all directed by EIC. 22.00 Nos 99.43 Rupees Ninety Nine and Forty Two Paise Only 2187.37

39 Providing, fabricating ,hoisting & fixing in position structural steel work, grill work, staircase etc in single section, pipe section etc fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate red oxide steel primer all complete and as directed by EIC. 3550.00 Kg 98.46 Rupees Ninety Eight and Forty Five Paise Only 349517.03

40 Providing and fixing hand rail in MS tubular sections of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer etc., complete all as directed by EIC. 1700.00 Kg 165.11 Rupees One Hundred Sixty Five and Eleven Paise Only 280690.74

41 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank etc., complete all as directed by EIC. 7000.00 Lit 9.24 Rupees Nine and Twenty Three Paise Only 64656.90

42 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 7.00 Nos 5465.99 Rupees Five Thousand Four Hundred Sixty Five and Ninety Eight Paise Only 38261.90

43 Providing and fixing wash basin White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc., complete all as direceted bthe EIC. 7.00 Nos 1867.88 Rupees One Thousand Eight Hundred Sixty Seven and Eighty Eight Paise Only 13075.17

44 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as directed by the EIC. 7.00 Nos 1349.06 Rupees One Thousand Three Hundred Forty Nine and Six Paise Only 9443.44

45 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) all as directed by EIC. 375.00 Sqm 344.70 Rupees Three Hundred Forty Four and Sixty Nine Paise Only 129261.83

46 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture etc., complete all as direceted by EIC 365.00 Sqm 189.82 Rupees One Hundred Eighty Nine and Eighty One Paise Only 69282.72

Sub-Total (Excluding GST) Rupees One Crore Twenty Six Lakh Thirty Three Thousand Nine Hundred Thirty Nine and Thirty Paise Only 12,633,939.30

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Basic Amount Put to Tender Select Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 12633939.30 BELOW % 12,633,939.30

Add 18% GST Rupees Twenty Two Lakh Seventy Four Thousand One Hundred Nine and Seven Paise Only 2,274,109.07

Grand Total (Including GST) Rupees One Crore Forty Nine Lakh Eight Thousand Forty Eight and Thirty Seven Paise Only 14,908,048.38

Note: (i) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess (if any), Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

AIRCRAFT OVERHAUL DIVISION, NASHIK

Pre-Qualification Profile

Tender Ref No. or Contract No.: NK/FW/CAP-1601A/2024-25

Name of Work: Construction of Security watch tower (03 nos) and Guard post (04 nos) in factory areas, HAL, Nashik. (Civil works)

Estimated Amount in Rs. Lakhs: 149.08

Tender Notice no.: NK/FW/542/2024-25

Name of the Individual / Firm / Company: * Mandatory

Sl.No Description Details Remarks

1.0 Essential/ Prequalification Criteria

1.1 Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs. In Lakhs 44.72

Financial YEAR Turn over (Rs. In Lakhs) Remarks

2018-19 Audited copies and Audit report by CA with UDIN of financial documents for last five (5) years Viz.Balance sheet, P &L account, Supporting Schedules and notes to account.

Average Annual Turnover of last Three Financial Years Rs. 0.00 Not meeting eligible criteria

1.2 Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs. In Lakhs) 59.63

Name of Bank & Branch Issued Related Document to be Uploaded to eProcurement Portal.

Date of Issue [DD-MM-YYYY]:

Value (Rs. In Lakhs) Not meeting eligible criteria

1.3 Experience:

Experience of having successfully completed similar works (As per Annexure-A of tender notice.) during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. OR (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. OR (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Completed similar works during last 7 years You are Not Eligible

Work No I Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.

Brief Description of Work:

Completed value of Work in `Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

You are Not Eligible

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.

Brief Description of Work:

Completed value of Work in `Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.

Brief Description of Work:

Completed value of Work in `Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

1.4 GSTIN Registration Number. Registration certificate to be uploaded

1.5 ESIC Registration Number Registration certificate to be uploaded

1.6 EPF Registration Number Registration certificate to be uploaded

1.7 Bid Capacity ( 2AN-B)

b) Value of the work executed in last five Financial years (Financial year wise) Values (Rs. in Lacs) (Required for bid capacity calculation)

2018-19 Related documents to be uploaded in eprocurement portal.

A = maximum value of works executed in any one year during last five years of which will be brought to current price level by applying a weightage of 10 % per year. Value of works executed during last five years shall be certified by Chartered Accountant and shall be considered for evaluation. 0.00

c) B = value at current price level of existing commitment and ongoing works to be completed in the next ‘N’ years (i.e 09 Months). (Authority:- Ministry of Statistics & Programme Implementation Guidelines Vide DO No 11025/28/2001 Dt. 7-11-01, Standard General Conditions for Domestic Contracts, as per Clause 4.6) Balance Value of the existing commitments and on-going works (Works in hand/in progress) to be completed in the next nine (09) months. Related documents to be uploaded in eprocurement portal.

Available bid Capacity (2AN-B) 0.00 Not meeting eligible criteria

1.8 Earnest Money Deposit (EMD) Related document to be scanned and uploaded to e-procurement portal and original one to be submitted to the address mentioned in NIT

1.9 License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works) Related Document to be Uploaded to e-procurement portal. i.e License or udertaking

1.9.1 Undertaking Annexure L Related Document to be Uploaded to eProcurement Portal.

2.1 Documents to be uploaded along with tender

2.1.1 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Related Document to be Uploaded to eProcurement Portal.

2.1.2 Address for correspondence

2.1.3 Contact details

Contact person name

Ph. No. with STD code

FAX No. with STD code

2.1.4 PAN No. Related Document to be Uploaded to eProcurement Portal.

2.1.5 I.T Returns for past 03 years (Assesment Year)

2021-22 Related documents to be uploaded in eprocurement portal.

2.1.6 Bank Balance statement for last three months. Related documents to be uploaded in eprocurement portal.

2.1.7 Details of latest overdraft facilities available with the agencies. Related documents to be uploaded in eprocurement portal.

2.1.8 Details of plant & machinery for the work. Related documents to be uploaded in eprocurement portal.

2.1.9 Proposed work completion schedule in the form of bar- chart. Related documents to be uploaded in eprocurement portal.

2.1.10 Details of person holding the power of Attorney.

Name Related documents to be uploaded in eprocurement portal.

Ph. No. with STD code

2.1.11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc.

Name of the Bank

Type of Account

3.0 Acceptance by party for Scope of work as per BOQ and Tender terms & conditions Accepted

4.0 DECLARATION

a The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 147) including price bid do hereby accept all the terms and conditions laid down Accepted

b I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Accepted