REPAIR / MAINTENANCE OF FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTINGS AND OTHER MISC WORK IN MES INSTALLATION B/R AND EM CELL BLDG AT ANAND PARBAT AOR OF AGE BR II OF GE NORTH DELHI CANTT 10

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground , complete all as specified and directed.

Dismantling of fencing wire mesh, any type, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded in any morter.

Dismentling wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc.

Brick work with Fly Ash bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 with water proofing compuund as per manufacture's instruction including fair finishing to top surface as directed by Engineer-in-Charge(water proofing compound will be measured and paid separately ).

Supply only liquid water proofing compound complete all as specified and directed.

Mild steel angle iron posts and struts, MS flat iron fillet securing chain link fencing confirming to FE-290 E-165 as in fencing including cutting tops for required shape, drilling holes,bolting, notching for wire including all necessary drilling of similar work, complete all as specified and directed.

Supply only Chain link fencing including wires, mesh of size 50mm x 50mm, weight not less than 3.0 Kg/Sqm confirming to IS, type standards rails, straining bolts etc including provision of binding wire, complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F in Repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.as directed (each line wire to be measured).

Restraining & resecuring existing barbed wire of any type incl making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) complete all as specified.

S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10 mm etc.

M&L, preparation of new surface, priming with red oxide / zinc chromate and two coats of synthetic enamel (ordinary tint) painting to steel and iron surface of any description over 10cm in width or girth not otherwise described.

Preparation of new plastered/unplastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 20mm thick with admixture of pigment to match with shade of granite incl 12mm thick rendering in CM 1:3 as backing coat for receiving of granite complete all as specified and directed.

M&L for Matt finish Exteior wall tiles 8 to 10mm thick & not exc 0.18 sqm , colour & shade of tiles as approved by Engr-in-charge,set and jointed in neat cement slurry and pointed in coloured cement to match the surface etc complete all as specified and directed by Engr-in-Charge.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of Acrylic interior exterior emulsion paint over a coat of acrylic primer complete all as specified and directed by Engineer-in-Charge.

Preparing old decorated/plastered or un-plastered surfaces of walls by scrapping the surfaces and steel wire brushing down smoke soot,mould,mass and efflorescence salts and trading oil and greasy spots etc and applying one coat of Acrylic exterior emulsin paint complete all as specified and directed by Engineer-in-Charge.

M&L for preperation of new plasterd or unplasterd surface and applying two coats of cement base paint of approved tint over a coat of acrylic primer complete all as specified and as direcred.

Demolition of plain /reinforeced cement concrete for any thickness in any position and of any discription complete all as specified and as diredted

Providing, cement concrete Type B1,1:2:4 (using 20 mm graded aggregate) as in copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L PCC 1:3:6 type C-1 using 40 mm thick stone aggregate as in plinth protection 75 mm thick incl finished even & smooth complete all as specified.

S&F rolled mild steel as in doors or gate of angle of other section with gusset plates,rails, braces, etc coplete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting(exlusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in subase of floor, complete all as specified and directed.

M&L sand filing under floors or in foundations including watering and consoldation.

M&L for Machine pressed precast concrete interlocking paver block of colour Red/Yellow glossy type any shape and size, as approved by Engr-in-Charge confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 40 mm thick sand cushion with pigment all as specified.

M&L coloured chequerred cement concrete tiles 30 cm x 30 cm x 25 mm thick machine pressed set jointed and pointed with grey cement & pigments in neat cement slurry in floors set in 15mm thick CM(1:6) including filling joints withwhite or colour cement as directed.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls etc with MS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75 mm dia and in any position complete all as specified.

S&F PVC (SWR) bends suitable for 75 mm external dia with or without access door complete all as specified

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe of 75 mm dia Complete all as specified and as directed.

S&F PVC (SWR) pipes, 110 mm external dia, type-B, ISI marked (IS:13592) double socketed in any length with rubber ring joints, fixed to walls etc with ms clampsMS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75 mm dia and in any position complete all as specified.

S&F PVC (SWR) bends suitable for 110 mm external dia with or without access door complete all as specified

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe of 110 mm dia Complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 30 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 06 mtr height from ground level). Notes:- (i) Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed.

All as per the description of serl item No 42 above but exc 1.5 sqm but n.exc 4sqm each

Taking down shutters of any description exc 1sqm but not exc 2 sqm each and all as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed.

S&F factory made Aluminium window as per TD drg No. CEDZ/D-316 with following specifications: (i) outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut aluminium welded (ii) center mullion of size 40mmx65mm (iii) welded shutter (02 nos) of size size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar (v) Welded wire mesh shutter(02 nos) of size 40x18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE (vii) Window shall have provision for installation of window AC/Desert Cooler and provn of window glass shutter, wire mesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

M&L for powder coated aluminium grill in repairs of powder coating of minimum 50 micron with aluminium mesh of sze 50x50mm with square tube solid 5mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed.

Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note:- stainless steel butt hinges shall be paid separately.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified.

S&F 100mm medium weight Mild steel butt hinges complete all as specified

S&F aluminium anodised barrel tower bolt 150 mm long extruded section all as specified.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed. complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M&L glazed ceramic coloured tiles size 450mm x 300mm x 7mm/350mm x 250mm x 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismantling complete all as specified and directed.

S&L of CPVC pipes 20mm outer diameter SDR 11 & plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

All as per the description of srl item No 59 above but with 25mm bore pipe

M&L for Cutting chases, pinning in Brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F in repair fancy type chromium plated bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified

S&F in repair stop cock/angle cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F in repair 15 mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed .

S&F in repair 20 mm dia brass CP towel rail 600mm long all as specified and directed by Engr in Charge

S&F in repairs CP health faucet hygienic spray (2in 1 facucet with 1.0M long tube) complete all as specified.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colour closed pattern including soft closing black seat cover all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of bracketscomplete all as directed and specified.

Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

Supply & Fix in repairs 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.

Supply & Fix in repairs 15mm bore PVC connection pipe of 450mm size with washers

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds,filling gaps wth wall care putty, complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying one coats of cement base paint on external wall surface complete all as specified and directed.

M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:6 mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:4 mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 10mm thick in CM 1:3 on any faces of concrete surfaces finished fair and even without using extra cement in ceiling/ chajja incl taking down cement plaster on brick/stone walls complete all as specified and as directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plastered surface complete all as specified (Payment for providing grooves shall be made separately and scafolding rates deemed to be included in quoted rates).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

Supply only PD proof 101 LW (+) of Dr Fixit or equivalent.

Supply only super latex 302 of Dr fixit or equivalent.

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of primer and Putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

Complete removal of old roof treatment incuding cement mortar ( except mudfushka , brick tile ) and removal of grass, small trees by picking sweeping , cleaning and washing down with water to remove dust etc incuding removing debries out side MOD land , complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water brushing neat cement slurry with 3.0 kg/sqm and M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note:- Water proofing additive shall be measured and paid separately.

M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- Application of water proofing treatment will be done by Authorised Applicator only. (i) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

M&L for applying a priming coat of @ 0.30 Kg / Sqm with Bituminous primer including prepration of surface , complete all as specified and directed .

M&L for applying evenly a tack coat of industrial hot blown grade bituminen 85/25 @ 1.2 Kg/Sqm including cleaning surfaces ,complete all as specified and directed.

M&L for water proofing treatment of roof with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) shall be laid with 100mm side lap/end lap on primed surfaces as per manufacturers instruction , complete all as specified and directed.

M&L for applying a coat of heat resisting paint ( aluminium bitumen paint) over APP surface, complete all as specified and directed .