Repairing and renovation of Mapal Kangjeibung, Imphal for the Financial year 2023-24

Amount

SH:1) Ground Development work (Banking and turfing of the ground)

Grassing with 'Buffalo Grass (Grassing with 'Buffalo' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed)

Top layer of the field ,filled with 40 to 50 mm thick of approved soil.

SH:2) Interior Renovation Gallery

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, within 50 m lead With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (a) 1:5:10 (1 cement : 5 Kanhaighat coarse sand : 10 graded stone aggregate 40 mm nominal size)

(b) 1:2:4 (1 cem :2 Kanhaighat coarse sand:4 graded stone aggrt.20mm n/size).

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 Kanhaighat coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size i) Size of Tile 600x600 mm

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved brand and manufacturer , in all colours & shade ,in skirting , riser of steps,over 12 mm thick bed of cement mortar 1:3( 1 cement: 3 Kanhaighat coarse sand),including grouting the joint with white cement & matching pigmnets etc.complete. 1.1) Size of tile 600x600 mm (Double charged) Branded

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.(a)water thinnable cement primer

Refixing old glass panes with putty and nails i) Float glass panes of nominal thickness 4 mm

Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping,sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.:

Painting on G.S. Sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Old work (one or more coats)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.

Finishing walls with Acrylic Smooth exterior paint of required shade :i) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type watercloset (European type W.C. pan) with seat and lid, 10 litre lowlevel white P.V.C. flushing cistern, including flush pipe, withmanually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cuttingand making good the walls and floors wherever required i)W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushingcistern, with fittings, standard size C.P. brass flush pipe,spreaders with unions and clamps (all in C.P. brass) with wastefitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cuttingand making good the walls and floors wherever required :i)Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. i)15 mm nominal outer dia Pipes

SH:3) Exterior Renovation Gallery without roofing

Demolishing lime concrete manually/ by mechanical means anddisposal of material within 50 metres lead as per direction of Engineer in charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, within 50 m lead With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (a) 1:5:10 (1 cement : 5 Kanhaighat coarse sand : 10 graded stone aggregate 40 mm nominal size)

(b) 1:2:4 (1 cem :2 Kanhaighat coarse sand:4 graded stone aggrt.20mm n/size).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.(a)water thinnable cement primer

Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping,sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.:

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.

Finishing walls with Acrylic Smooth exterior paint of required shade :i) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cemen paint surface

Providing and fixing steel gate by using 40x40 mm hallow sq. bar as main bars horizontally,vertically and 25x25 mm hallow sq. bars intermediate , M.S. Flat 25 x 3 mm mm as styles bar ,connecting bar sq 25x 25 mm to arow i/c priming , painting etc completed as per direction of Engineer -in-charge .

SH:4)Minor Repairing of Exterior drain around the ground

Pumping out water caused by springs,tidal or river seepage,broken water mains or drains and the like.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand:4 graded stone aggrt.20mm n/size).

Brick work with 1st clasds common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

Centering and shuttering including strutting, propping etc. and removal of form for a) Suspended floors, roofs, landings, balconies and access platform with water, proof ply 12mm thick

b) Edges of slabs and breaks in floors and walls Under 20 cm wide

15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished with a floating coat of neat cement on the roughside of single or half brick wall

SH:3) Providing of IEI

Supply and drawing of following size of PVC cassing and capping along with accessories etc.

Supply and fixing of metal boxes

100mmX100mmX60mm deep

200mmX125mmX60mm deep

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC cassing capping etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 12/18W LED bulb

S/F 50W LED bulb

SITC surface/recess mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 18 W 840 LHEAABP7IL1W018complete with connection as reqd. (Havell's)

S/F surface/ pendent mounting 1 x 18 W LED lamp channel luminories complete with all accersories connection etc. as required

S/F 300mm dia wal mounting fan complete with all accessories etc. as reqd.

SITC 160W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETAIRISFLS 160W LED 757WBLTG complete with connection as rqd. (Havell's)

P/F 30 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Gaikhonlung Panmei (BID ID -8532)

M/s Seven Clan Agency (BID ID -8531)