REPAIR AND MAINT OF INTERNAL WIRING AND FITTING, LED REPLACEMENT AT COMD OFFICE AND MAINT TO FAN AND GEYSERS OF ZONE I AREA AT JAIPUR MIL STN

Amount

Taking down carefully surface aluminum or copper point wiring from exisitng PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for rewiring point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into concealed conduit and terminated in modular metal flush boxes 1.0mm thick for mounting modular cover plate & frame, switches, sockets, fan regulators as required for one light point controlled by one switch.

All as per item No. 02 here-in-before but one fan point controlled by one switch.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into into existing concealed conduit and terminated in and including modular metal flush boxes for mounting modular cover plate & frame for one socket point 16 Amps controlled by one switch.

M&L for rewiring point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into concealed conduit and terminated ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, fan regulators one light point controlled by one switch.

All as per item No. 04 here-in-before but one fan point controlled by one switch.

All as per item No. 04 here-in-before but one light point controlled by two, two way switch.

All as per item No. 04 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item No. 04 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn concealed conduit and terminatedivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, for one socket point 16 Amps controlled by one switch.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16 mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover/ PVC gang box for mounting sheet cover for mounting switches, sockets, fan regulators one light point controlled by one switch.

All as per item No. 06 above but one fan point controlled by one switch.

All as per item No. 06 above but one socket outlet 6 Amps controled by one switch on the same board with other switches.

All as per item No. 06 above but one socket outlet 6 Amps controlled by one switch on independent board.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0mm covered with 3mm thick phenlic laminated white sheet cover / PVC Gang box for mounting sheet cover for mounting switches, sockets for one 16 Amps socket outlet point controlled by one switch on independent board.

S&F angle holder, insulated polycarbonate body with back plate complete.

S&F switch piano flush button single pole one way 6 Amp complete.

S&F switch piano flush button single pole one way 16 Amp complete.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete.

S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete.

S&F wire less door bell AC 240 volts, single pole complete.

S&F in repair switch piano flush button single pole one way 6 Amp complete.

S&F in repair switch piano flush button single pole one way 16 Amp complete.

S&F in repair socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete.

S&F in repair socket outlet, 2-in-1, 3 pin 6 Amps flush type compete.

S&F in repair hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete.

S&F ceiling rose 3 plates polycarbonate body complete.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts.

S & F modular blanking plate 1 module.

S&F modular whiter cover plate with frame 3 module.

S&F modular whiter cover plate with frame 4 module.

S&F modular whiter cover plate with frame 6 module.

S&F modular whiter cover plate with frame 8 module.

S&F Modular metal flush box 3 module

S&F Modular metal flush box 4 module

S&F Modular metal flush box 6 module

S&F Modular metal flush box 8 module

S&F in repair replacementswitch modular 1 way 6 Amps, 230 volts, 1 module as per existing make and size Complete

S&F in replecement modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts. as per existing make and size Complete

S&F in replacement modular switch 1 way 16 Amps, 230 volts, 1 module.as per existing make and size Complete

S&F in replacement modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts.as per existing make and size Complete

S&F in replacement modular fan regulator 120 watts, 2-module AC 230 Volts.as per existing make and size Complete

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into existing concealed conduit of size 2x4Sqmm + 1x4.0 Sqmm earth wire including making connection as required.

All as per item No. 40 above but 2x6 Sqmm + 1x6 Sqmm earth in 20 mm dia conduit.

All as per item No. 40 above but 2x10 Sqmm + 1x10 Sqmm earth in 25mm dia conduit.

S&F rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of 20mm dia.

S&F rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of 25mm dia.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into concealed conduit of size 2x1.5Sqmm + 1x1.5 Sqmm earth wire including making connection as required.

S & F engegement light with acralic cover with 2 nos holder fixing in wall and celing complete

S & F LED lamp of B-22 Based red colour for engegement light complete

S & F LED lamp of B-22 Based Green colour for engegement light complete

S&F in repair MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete.

S&F in repair MCBs of 'C' series double pole 10 to 32 Amps.

S&F in repair MCBs of 'C' series four pole 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete.

S&F in repair MCBs of 'C' series four pole 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete.

S&F in repair LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 115 lumen per watt and total power consumption not more than 17 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete Make - Philips ref Cat Part No BN 308 C LED 20S -6500 L120 PSU WH or equivalent as approved by GE

S&F in repair recess mounted LED panel of size 1'x1', 17 watts 1500 lumen output having luminous efficacy >85 lm/W, 6500K, 50Hz, p.f. >0.90, CRI80, THD <30%, , Long Life 25000 burning hours including making connection Complete.Make - Philips ref Cat Part No RC 375B LED 15S W30L30PCV IN or equIvalent as approved by GE

Supply and fixing in repairs energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with fullglow fully diffused diffuser and lumen output of 3600 lumens having constant current electronic driver of 36 watt duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable as required. Make - Philips ref Cat Part No RC 308B LED 36 S -6500 G4 L60 W 60 PSU OD or equivalent as approved by GE

Supply and fixing in repairs energy efficient recessed mounted LED luminaire suitable for 180 mm dia ceiling with flat diffuser and lumen output of 115 lumens per watt of 18 watt having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable as required PF not lessthen 0.95 ITHD lesthen or equaal 10% opreting voltage 140-270 Volt .

Supply and fix in replacement of aviation light single led of 6 watt including fixing arrengemet and coneection complete .

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth strip 32x6mm, by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point , PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore medium grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.

S&F in replacement single pointed air termination aluminium rod 12mm dia 300 mm long including nuts & bolts for fixing air termination rod to pole/ pipe duly insulated by providing appropriate insulator all as required at site.

M&L in replacement test point terminal block made of gun metal or phosphorpous bronze size 75x75x25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hex. head screw complete all as specified and directed

S&F in replacement aluminum strip 25x3.15mm as roof conductor or down conductor or along the pole/pipe complete with saddles/ insulators made out of porcelain or fibere and fixing screws all as required at site or directed.

S&F in Replacement GI strip 32x6mm, buried in ground or fixed to wall etc for loop earthing.

Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good disturbed surfaces complete.

S&F in replacement of Leonlight LED Picture light , Full matal lemp with swivel lamp hed of 8 watt including electric conecction complete.

Rewinding the motor of table / pedestal / cabin fan 400 mm of all types and make with super enamelled copper wire of existing gauge and approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of fresh air/exhaust fan 230/300 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of exhaust fan 375/450 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of wall mount air circulator fan of size 600 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Renewal of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete.

Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.

Renewal of AC film capacitor 4.0 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.

Renewal of self lubricating bush of gun metal of same type for ceiling fan / exhaust fan as required.

Renewal of shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required.

M&L for painting of table / pedestal / cabin fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc

M&L for painting of ceiling fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc and writing MES No in a height of minimum 30 mm with black paint as required .

M&L for scraping completely fresh air / exhaust fan of any sweep and make and providing with two or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade over a coat of red oxide primer and polishing with rubbing compound and wax polish.

Transportation of ceiling fan / exhaust fan from store to site or site to store as required.

Installing, testing and commissioning repaired ceiling fans at any location in cantonment Jaipur including connection complete.

Renewal of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required.

Renewal of PVC canopy suitable for ceiling fan of any size and make as required.

Renewal of down rod of ceiling fan made of MS pipe 15 mm bore including cutting, threading, painting etc as 30 cm to 60 Cm required.

M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe 410-O or Fe 310-O including nuts, bolts, washer, drilling holes for bolts in any shape or size for fixing ceiling fan complete.

Renewal of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete.

Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required.

Taking down carefully storage type water heater (geyser) any make and capacity from clamp/bolts including disconnecting water and electric connection and re fixing the same and connecting up after cleaning of geyser and repair complete. (Note - Repair work shall be measured separately).

Opening up geyser of capacity 25/50 litre, checking defect, taking out u/s parts and re-assembling after carrying out repair / renewal work including nuts / bolts / washers / gaskets / fusible plug etc wherever required and minor items not included separately in schedule. (Note - U/s parts shall be measured separately under relevant item of schedule as supply only).

Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.

Supply only heating element 2.0 KW, 230 volts, ISI marked suitable for 25/ 50 litre capacity geysers of any type as required.

Supply only thermostat ISI marked suitable for 25/50 litres geysers as required.

Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.

Supply only stainless steel inner tank suitable for 50 litre capacity geysers housing complete.

Repair of inner copper tank of geysers 25/50 litre capacity with gas welding not exceeding 5 mm thick to make it leak proof complete.

Repair of apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete.

Supply only dis cut out switch suitable for 25 litre capacity geysers ( make of geyser MARC) complete.

Supply only capillary thermostat set suitable for 25 litre capacity geysers ( make of geyser MARC) complete.

Renewal of brass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete.

M&L for painting of geyser 25/50 litre with two coats of synthetic enamelled white paint after removing old paint and preparation of surface and writing MES No (Letters height 10 cm) complete.

Renewal of PVC insulated over all PVC sheathed three core copper cable of size 2.5 sqmm complete.

Supply and fixing in replacement hot water tank made out of 2.5mm thick MS sheet duly welded with seamless welding, water leak proof with all accessories such as inlet water connection, outlet water connection, normal water connection, overflow water connection etc including fixing PUF insulation 32mm thick all as required.

S&F in replacement hot water pipe duly insulated with glass wool and aluminium cladding 15mm bore.

Servicing of solar collector panel of capacity 100 ltrs, cleaning the entire panel thoroughly after opening it, minor repair like nuts, bolts, washer, clamps etc as required and testing.

S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete.

Supply and fix in replacement PVC fresh air fan 250 mm sweep with louvers, fan motor and accessories complete including making connections.

Schedule of Credit (tentative)

M/s Prakash Enterprises

S.R.Enterprises

M/S Sheeba Enterprises

VISHAL ENGINEERING COMPANY

J.J.ENGINEERING

SHREE BHAGWATI ENTERPRISES

M/S Anil Enterprises

Pioneer Enterprises

M/S HARI CONSTRUCTION