SPL REPAIR TO BUILDING NO. CC 289 FOLLOWERS QUARTERS AT AWC UNDER GE AWC MHOW.

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for all as directed.

M&L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in mass concrete, sub base for suken floor complete all as specified and directed.

Dismantling PVC water tanks Exc 250 ltrs but not 500 ltrs including taking down of float valve and removing from site complete all as directed.

S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 complete all as specified and directed.

S&F ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed.

M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

Taking up or down existing steel tubing and connection complete for 15 mm bore complete all as specified.

Description same as per item No 7.00 but 20mm bore.

M&L Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Description same as per item No 9.00 but 20mm bore.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed built in cement mortar 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 350 mm x 250 mm x 7 mm / 450 mm x 350 mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapet wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per item No 17.00 above but as in skirting or vertical surfaces over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

S & F 125 x 60 mm size Pressed steel frames for doors with one oRMore rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc., complete as specified

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed.

M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2020 and as directed by GE/Engineer-in-Charge.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete .

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S&F Steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and as directed

S&F steel window of approved make with side hung shutter including projecting hinge,fixing lugs,steel handle and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and as directed

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.

Supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm

Supply only 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with beads ( supplied with joinery ) complete all as specified.

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed

M&L Brick work with sub class 'B' modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping cutting, chiseling, derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : - Cost of formwork shall be deemed to be included.

Taking down cement plaster any description on brick or stone walls etc. including raking out joints, hacking for key scrubbing down with water etc all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in two layers (10 mm thick bottom layer & top layer 5mm thick), mixed with water proofing compound in top layer by weight of cement or as peRManufacturer instructions, finished even & fair without using extra cement all complete as specified and as directed

Supply only Integral water proofing compound

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) complete all as specified and as directed.

M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) complete all as specified and as directed.

M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M & L Preparation of newly plasterd wall surface apply two coat of cement based paint over a one coat of wall primer plastered and other surface with alkali resistant priming paint complete all as specified and directed.

Preparation of decorated old plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of cement base paint including washing floors, cleaning glass, joinery, electrical fittings wiring etc, of drops and splashes complete all as specified.

Complete removal of old treatment on internal surfaces of wall by scrapping , and washing etc and preparation surfaces all as specified.

M&L for applying 3 mm thick wall care putty on wall on internal old/new wall surfaces as peRManufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement all as specified and dircted

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

Supply only10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed. Note:-Fixing only rate is included in item No 56 above.

Supply only PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete.

S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified .

S&F in repairs swivel shower of CP with shower arm 15mm size any colour for fixing with 15mm pipe.

S&F in repair 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed

S & F( in repair) 15 mm Bib tap fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)

S&F harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment all as specifed and as directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) bends any radius with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed.

M & L for applying one prime coat acrylic polymeRModified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymeRModified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as peRManufacturers instruction as directed by engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes. 4. Applying 15-20mm thick protection plaster 1:3(Cement : Sand) ration on vertical and horizonal areas admixed with Dr.Fixit Pidiproof LW Plus(Conforming IS 2645 2003) @200ml per bag of cement and coated rate shall deemed to be included.

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.

Taking down copper/aluminium point wiring (light, fan, sockets or power) complete including fixture and fitting such as switches, ceiling roses, pandents, regulators, socket light fittings etc. removing material for taking credit and making rule distrubed surfaces of walls, floors all as specified and as directed.

Taking down care fully light fitting of any size and type for refixing where directed all as specified and as directed.

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, concealed on walls and fixed by means of brass screws incl modular cover plates and cover frame any size/module, foRMounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for the following complete incl taking down of old unsv point wiring all as specified and directed for One light / fan /bell controlled by one, one way switch 5/6 Amps.

All as per item No 82.00 here in above but for One light point controlled by two, two way switch 5/6 Amps

All as per item No 82.00 here in above but for One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

All as per item No 82.00 here in above but for One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceled on walls and fixed by means of brass screws incl modular cover plates and cover frame any size/module, foRMounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independent complete incl taking down of old unsv point wiring all as specified and directed.

S&F Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed.

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular switch 2 way 6 A , 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F modular bell push type 6 A ,1 module complete all as specified and directed.

S&F bell multi music type AC 230 volts single pole complete all as specified and directed.

M&L for refixing LED tube light fitting 20 watts (slim channel) obtained from Item No 81 Here in above complete with all fitting accessories , screws incl flexible connecting wire 1.5 sq mm 3 core from ceiling rose to connector of fitting complete all as specified and directed.

M&L for refixing LED tube light fitting 10 watts obtained from Item No 81 Here in above complete with all fitting accessories , screws incl flexible connecting wire 1.5 sq mm 3 core from ceiling rose to connector of fitting complete all as specified and directed.

M&L foRModular angular holder with and incl LED Bulb 9 watts 5 star rated complete all as specified and as directed.

M&L for LED Bulk head fitings 6.5 to 13 watts designed foRModern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S&F LED bldg security light fitting 30 watt, lumen output >= 110 lm/W made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete incl mounting pipe made of GI tubing 40 mm size 1M length bend into size with mounting brackets nut bolt and washers all as specified and directed.

S&F MCB DB SPN 12 way, IP 43, IK 09 double door with 200 Amps rated bus bar, 230 volts, 50 Hz complete all as specifed and directed.

S&F MCB DB SPN 6 way, IP 43, IK 09 double door with 200 Amps rated bus bar, 230 volts, 50 Hz complete all as specifed and directed.

Supply & Fix MCB SPN 40 to 63 Amps current rating 'C' series 10 KA breaking capacity of the same make as item no. 21 and 22 complete all as specified and directed.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacity the same make as item no. 21 and 22 complete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacity the same make as item no. 21 and 22 complete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed.

M & L sub main wiring with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good disturbed surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Taking down existing exhaust fan/ceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and keeping in safe custordy till refixing and deposit to MES store yard complete all as specified and as directed.

M&L for refixing of ceiling fans obtained from item No 28 here in above incl making connection with 3 core cable 1.5 sqmm from ceiling rose to connector of fan incl replacing condensor , conopy, down rod all as specified and as directed.

S&F exhaust fans AC single phase 230 volt metallic body of size 300 mm sweep with heavy duty louvers (duly painted) 1400 RPM complete with nuts boults and washers size of bolt 15 cm long 13 mm dia embedded in the wall incl provn of 3 core PVC flexible copper cable of size 23/0.0076 from ceiling rose to exhaust fan at existing hole complete all as specified and as directed.

Supply , fixing rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed.

M&L for IP 65 thermoplastic PS polystrene weather proof meter protection box of size 217 x 253 x 115 mm for fixing single phase meter with multi level knockouts for cable glands in different sizes . The pre moulded knockouts shall be avialable on the top and bottom of the junction box to enable the cable entries from both direction. The meter box shall have an optional cable entry at the bottom of the box via pre- mouled knockout to enable pole mounting option. Lid fastners will be tool operated it will be sealable with accessories. The meter box shall have elongated holes inside them for wall mouonting provision.In the event of formation of condensed water, the junction box shall have a minimum two condunsation knockouts inside to ensure optimum safe performance. and it shall be weather proof, water proof, temparature resistant Conf IEC 606710-22and IEC 60695-2 and as per IEC 60529 for IP 65 level protection incl removal and refixixing of single phase meter inside meter protection box all as specified and as directed,. Model No KG 9003 of Hensel/ Equivalent make in Havells/C&S Note : The rate of removal and refixing of sinle phase meter inside meter protection box deemed to be included.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

M/S GARG CONSTRUCTION

Jamna Constructions

J B CONSTRUCTION AND DEVLOPERS