Loading
Loading…
Loading…
Tender Value
₹39.0 L
EMD Value
₹78,100
Closing Date
5 Aug 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTRICAL
12 conditions · 1 needing a document upload
The tenderer shall posses the valid Electrical Contractor's license and Supervisory License issued by any State/ Central Govt. licensing board for the required voltage level or above with their tender paper.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
24 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Attested copies of the documents pertaining to constitution of the concern (Sole Proprietorship Firm / Partnership Firm /Registered Company/ Registered Trust / Registered Society /HUF etc.) as described in detail at clause no.14 of Tender Form (Second Sheet) of GCC 2022 as well as legal competency of the person signing the tender offer (Power of Attorney) should be uploaded clearly indicating the nature of the firm. Power of attorney shall be submitted even if the person signing on behalf of the tenderer is authorized for that purpose through partnership deed / Memorandum of Understanding / Article of Association or such other document, failing which tender is liable to be rejected. Sole proprietorship firm shall have to submit notarized copy of the affidavit. In case the tender is signed and submitted by the proprietor himself /herseIf, no power of attorney is required. Railway reserves the right to legally scrutinize original copies of such documents as and when required. After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no suchmention is available in tender offer submitted.
The tenderer will have to make payment towards Earnest money deposit (EMD) against this tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal (www.ireps.gov.in). The tenderer is required to pay the Earnest Money deposit before he can prepare and submit his bid. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Earnest Money on submission of Registration Certificate issued by appropriate authority. 100% Govt. owned PSUs shall be exempted from payment of earnest money deposit. Labour Cooperative Societies shall deposit only 50% of above earnest money deposit on submission of necessary documents.
In support of their credentials, the Tenderers should submit along with their tenders document - List of Plant and Machinery available on hand (own/hired) and proposed to be inducted (own/ hired) to be given separately for the subject work .
Scanned copy of PAN (Permanent Account Number) and Goods and Services Tax Registration Certificate indicating GSTIN should be uploaded. In case of non-availability / non-applicability of any of these documents, reasons should be furnished under 'Remarks'. GSTIN along with other details required under CGST/SGST/UTGST/IGST Act may also be submitted by the successful tenderer immediately after the award of contract.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
Rates are inclusive of all taxes/GST, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Earnest Money and Tender Document Cost: -All the tenderers / Contractors have to deposit full earnest money and tender document cost as stipulated in the tender document through online modes as permitted in IREPS application.
Tenderers shall note that the submission of supporting documents at the time of on line bidding of tender, is important and they shall ensure the same. However Railways may seek clarification/details/documents in this regard.
Before submitting the offer, please read carefully complete e- tender document including annexed document, Standard General Condition of Contract. Special Condition of Contract, bill of quantities etc. Your digital signature on the etender form will be considered as your confirmation that you have read and accepted all the condition laid down in the document stated above
This contract shall be governed by "Indian Railways General Condition of Contract, April-2022" which is uploaded with up to date correction slips (if any).However, tenderers need not upload the same along with their bid. Tenderers are responsible for knowledge of GCC and its amendment.
Electrical work in connection with provision of Raising of platform no.1,2/3 to high level at purnea court station.
EL-G-SPJ-17-ET-26-27
EL-G-SPJ-17-ET-26-27
Open
Works - General
180 Days
Samastipur, Bihar
₹0
₹78,100
5 Aug 2026
14 Jul 2026
22 Jul 2026
83 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 39,04,973.74 | ||
| — | 30.00 | — | — | ||
| Supply, delivery & Fixing of octagonal pole hot Dip Galvanized in single dip average 70 micron DFT, designed for maximum wind speed of 169KM/Hr., BOP-7030 type pole of 6 m long, top dia 70mm, bottom dia. 130mm sheet thickness 3mm, in single section with Base plate (220x220x12)mm (LxBxT) with 4x20mm dia. 700mm long with 100mm projection foundation bolt complete with smart pack junction box with bakelite sheet, 6A MCB & stud terminals (for mounting inside base component of pole) and internal wiring for terminal to fitting with 2x2.5 sq.mm cable including single arm bracket 1 mtr. long suitable for 3 to 10 mtr. pole of reputed make. Make - Bajaj, Transrail, Bansal, Jindal, Gammon Group or similar. | — | — | — | 4,64,100 | |
| — | 30.00 | — | — | ||
| "Supply of octagonal pole (dip galvanised in single dip average 70 micron), 6m long, top dia 70mm, bottom dia 135mm sheet thickness 3mm in single section with base plate (220x220x12mm(LxBxT) with 700mm long double arm brcket and 4 nos.16mn dia x 600mm long (100mm thread projection) foundation bolts, complete with smart pack junction box with 6A MCB & stud terminals (for mounting inside base plate) and internal wiring for terminal to fitting with 2x2.5 sqmm cable of reputed make, Make-Bajaj, Bansal, Jindal, Transrail lighting LTD, Gammon Group or similar. " | — | — | — | 5,01,513.3 | |
| — | 60.00 | — | — | ||
| "Making of foundation suitable for 3 to 8 mtrs octagonal pole as per site incharge/4'x4'x4' manufacture dimension as per site requiremenl. | — | — | — | 1,40,553 | |
| — | 90.00 | — | — | ||
| "Fixing and supply of LED street light 60 W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 on pole/wall with suitable size G.I. Pipe of medium gauge smooth bend with 120degree (2 feet + 1 feet) long, MS clamp, Nut bolt etc. as required, Kit-kat fuse 16amp in suitable size MS box should be provided with G.I. pipe. Wiring/ connection of fitting and kit-kat fuse will be done with not less than 2.5 sq.mm aluminium wire through G.I. pipes and PVC flexible pipes complete in all respect. Similar to Havells cat. no. ENDURAPEARLNEOSL60WLED757PASYTOPCAST. Make of Luminaire, Philips, Havells, Bajaj, Crompton or similar. LED Luminaire warranty period will be 05 years. " | — | — | — | 4,66,216.2 | |
| — | 24.00 | — | — | ||
| Provision of earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories with charcoal and salt as required and providing masonary foundation work, watering arangement etc. Pipe make - Tata, Jindal, Bansal or similar. | — | — | — | 27,870.48 | |
| — | 240.00 | — | — | ||
| "Providing and fixing 06 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cable. " | — | — | — | 1,310.4 | |
| — | 60.00 | — | — | ||
| "Supply, laying and fixing of GI pipe of 75 mm dia for laying the cable across the road/drain/post 'B' class. Make-Tata/Jindal/Bansal or similar. " | — | — | — | 28,672.8 | |
| — | 200.00 | — | — | ||
| "Provision, fixing/laying at underground/ surface/wall & supply at site of double walled corrugated (DWC) pipes or GI pipe for power cable protection with IS 14930 part- II along with the socket coupler. T joints to be provided at the junctions where ever required. Size of outer dia 120 mm/inner dia 103.5 mm. The pipe should be ISI marked. " | — | — | — | 63,954 | |
| — | 1420.00 | — | — | ||
| Laying and fixing one no. XLPE/PVC Aluminium Conductor 1100 Volt grade of size exceeding 25 sq mm but not exceeding 120 sq mm on surface/wall/rail pole through Gl pipe as per site required. (If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) | — | — | — | 28,371.6 | |
| — | — | — | Above/ 116411.60 Below/P | ||
| "Laying and fixing of one number XLPE Cable 1100V grade of size exceeding 25 Sq.mm direct in ground one meter depth including excavation, sand cushioning, and refilling to trench as required. (If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) " | — | 2840.00 | — | — | |
| — | 2840.00 | — | — | ||
| "Laying of one no. additional PVC insulated and PVC sheathed/XLPE cable of 1100V grade up to 120 sq. mm direct in ground including excavation, sand cushioning protective covering and refilling of trench as required. (If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) " | — | — | — | 58,191.6 | |
| — | 4.00 | — | — | ||
| Supplying and fixing of 4 strips CU BBC 300mm long of 100A cap., Make- Standard/Havells/ Bentec/C&S or similar. | — | — | — | 19,496 | |
| — | 6.00 | — | — | ||
| "Supplying and fixing of 4 strips CU BBC 300mm long of 200A cap., Make- Standard/Havells/ Bentec/C&S or similar. " | — | — | — | 48,528 | |
| — | 16.00 | — | — | ||
| "Supply, fixing, connection, testing and commissioning of Panel mounting socket inclinedtype As per IP66/67-IK 09,415V, 125Amp, 3P+N+E as percat ref no. 059117 makeLegrands/Hensel/Havells with front operated, switch-disconnector-Fuse unit capacity 125 Amp as per cat ref no. FN125 / TPN, SK95001 range 63A to 125 Amp with suitable HRC fuse link of Type HN sie000/00 suitable for DIN fuse link (TPN) makeL&T/HPL/Havells all above item in switch box of GI sheet16SWG for precooling purpose. " | — | — | — | 2,77,032.48 | |
| — | 16.00 | — | — | ||
| Supply, fixing, connection of straight plug IP66/67, 415V,125 Amp, 3P+N+E as per cat. Ref. No. 059127 Make-Legrand or Similar in Havells, ABB, Hensel. | — | — | — | 1,44,801.92 | |
| — | 16.00 | — | — | ||
| "Design, supply, installation and fixing of switch box of G.I.sheet of size 2 ft x 1.5 ft x 10inch 16 SWG or required suitable size for fixing the MCCB switch & other switch for pre-cooling of AC Coaches and Backelite sheet mounted below the switch box and connected with the conductor, the nut-bolts and washer with checknut should be provided on Bakelite sheet so that pre-cooling cable may be connected properly. " | — | — | — | 42,239.2 | |
| — | 16.00 | — | — | ||
| Supply, fabrication and fixing of cable Terminal Board fully enclosed in MS sheet of 16SWG thickness all enclosed with painted dust and vermin proof water entry protected laying provision of three/ two entry with rubber bushing or entry for and incoming cable of all size of 3.5 core and 2/4 nos of 4/10mmsq single core aluminiumwire with suitable size bus bar 63 Amp-02 nos fuse grip etc. (Size of box 10"x14"x4") | — | — | — | 16,809.76 | |
| — | 11.00 | — | — | ||
| "Design, fabrication, supply, installation, testing & commissioning of cubical LT panel board 01 No. suitable for incorporating Ammeter, voltmter, indication miniature neon lamps, MCCBs, and bus bar etc.as as per site requirement." | — | — | — | 29,029 | |
| — | 2.80 | — | — | ||
| "Supply, installation, testing & commissioning of copper bus bar of 600 Amp. Cap with insulation tape. The bus bar shall be fabricated with 50x8mm. " | — | — | — | 17,581.2 | |
| — | 1.00 | — | — | ||
| "Supply, installation, testing & commissioning of pannel mounted square flush type voltmeter 0-500 volt & Ammeter 0-500 Amp. With C.T. having ratio 500/5 amp. Make Automatic Electric/MECO/L&T/Siemens 3 Nos. miniature indication neon lamps 250 volts & 2 Nos. selector switches for voltmeter & ammeter. " | — | — | — | 2,821 | |
| — | 11.00 | — | — | ||
| "Supply of copper strips (commercial grade) of suitable size for connection of MCCB, ACB, COS etc. from bus bar etc. as required. " | — | — | — | 7,507.5 | |
| — | 1.00 | — | — | ||
| "Supply, fixing, testing & commissioning of MCCB 400 Amp., Braking capacity- 36kA, triple pole 415V 50Hz. Make - L&T, Siemens, Havells, ABB, Schneider, Benlo or similar. " | — | — | — | 29,300 | |
| — | 3.00 | — | — | ||
| "Supply, fixing, testing & commissioning of MCCB 200 Amp., Braking capacity-36kA, triple pole 415V 50Hz. Make - L&T, Siemens, Havells, ABB, Schneider, Benlo or similar. " | — | — | — | 69,342 | |
| — | 8.00 | — | — | ||
| "Supply, fixing, testing & commissioning of MCCB 63 Amp., Braking capacity- 25kA, triple pole 415V 50Hz. Make - L&T, Siemens, Havells, ABB, Schneider, Benlo or similar. " | — | — | — | 59,640 | |
| — | 4.00 | — | — | ||
| "Supply, fixing, testing & commissioning of MCCB 32 Amp., Braking capacity-25kA, triple pole 415V 50Hz. Make - L&T, Siemens. Havells, ABB, Schneider, Benlo or similar. " | — | — | — | 29,820 | |
| — | 10.00 | — | — | ||
| "Fabrication, supply & fixing of Mobile/laptop charging board with 10 Nos, switches & Sockets combined modular type in two ladders 5 Nos, in each ladder with indication lamp made of 25 x 25 Sq.mm square pipe heavy duty Hylum sheet thickness 3 mm. board size 3'x2.5'x6"". Make of switch-Havells, Cona or similar ISI make approved by competent authority. " | — | — | — | 19,110 | |
| — | 4.00 | — | — | ||
| Supply at site, installation, testing and commissioning of color signal light panel with automatic operation of 3 source of supply capacity 60 amp Approved by RDSO/LKO connection on incoming as well as outgoing, testing of frequency of changing over from one source of supply to another source of supply. Make - JAPS or similar RDSO approved. | — | — | — | 1,51,800 | |
| — | 900.00 | — | — | ||
| "Fabrication as per site requirement and erection on pre erected steel tubular/rail pole/Cage for water cooler of MS Cross Arm bracket with nut bolt, clamp etc including supply of cross arm bracket Nut-bolt, clamp etc. " | — | — | — | 68,400 | |
| — | 2.00 | — | — | ||
| "Fixing, testing, installation and commissioning of 150 Amp. CLS panel item complete in all respect with secure IE rule arrangement. " | — | — | — | 5,602.62 | |
| — | 144.00 | — | — | ||
| Installation ,testing commissioning and fixing of 3D LED based name boards on ALP sheet of 3mm gauge thickness with projected alphabets of made of acrylic sheet in size of standard height as per space of alphabets with LED chip modular light, The work -is including of erection of LED Board with minor modification on existing structure with required extra MS angle with painting of structure .Board in Hind,English &urdu. | — | — | — | 1,38,794.4 | |
| — | 48.00 | — | — | ||
| "Dismantling of Rail pole/steel tubular pole(by cutting of pole) with loading and unloading or rail pole up to 13 meter. " | — | — | — | 5,690.88 | |
| — | 2.00 | — | — | ||
| Supply of 11mtr high mast system totally hot dip galvanized having in One Section, Top dia 100mm, bottom dia 360mm and Sheet thickness 3mm, PCD-445 MM, suitable for 50m/sec. wind velocity as per IS 875 Part 3 along with head frame, luminaries carriage suitable to install 06 nos. of luminaries in symmetrical arrangement and accessories required such as supply of raising lowering system of 11 M high mast comprising Single Gear Double drum (SGDD), 7/19 construction, 5mm diameter SS wire rope having Two Wire Rope System, trailing cable, connector, integral power tool motor, manual handle, junction box etc. Make-TRANSRAIL, Bajaj, Philips, Surya, Crompton, VALMONT or similar. | — | — | — | 1,63,944 | |
| — | 2.00 | — | — | ||
| "Supply of foundation bolts M24 X 850 MM,TS 600, manufactured from special steel along with nuts, washers, anchor plates and templates. Make- TRANSRAIL, Bajaj, Philips, Surya, Crompton, VALMONT or similar. " | — | — | — | 13,662 | |
| — | 12.00 | — | — | ||
| "Fixing, connection and supply of LED Flood Light 250 Watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting. Similar to Bajaj GLEAM F 275L WH SY PC SD V2-113984. (LED Light Warranty will be five Years). Make of luminaire -Philips, Havells, Bajaj, Crompton, Transrail or similar. " | — | — | — | 90,169.2 | |
| — | 2.00 | — | — | ||
| "Supply of LED type single dome aviation obstruction light. Make TRANSRAIL, Bajaj, Philips, Surya, Crompton, VALMONT or similar. " | — | — | — | 5,464.8 | |
| — | 2.00 | — | — | ||
| "Supply of feeder panel comprising main incoming 32 MCB, auto time switch, 25A TP contractor, reversing starter and protective system etc as required for operation of high mast system complete and raise lower push button, Incoming 35sq.mm and outgoing 16 & 2.5sq.mm terminals. Make- Havells, Anchor, HPL or similar. " | — | — | — | 32,788.8 | |
| — | 2.00 | — | — | ||
| "Construction of suitable shallow foundation with 1:2:4 concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sq mtr at 2 meter depth with all materials and labour. " | — | — | — | 61,479 | |
| — | 2.00 | — | — | ||
| "Erection of the high mast with the help of suitable tools and plants, wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5sq.mm, lugs, MCB and all labour. " | — | — | — | 27,324 | |
| — | 2.00 | — | — | ||
| Installation of the outdoor stand mounted feeder pillar by grouting the stand in concrete. | — | — | — | 6,831 | |
| — | 400.00 | — | — | ||
| "Supplying and drawing 2x4 sq.mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. copper cable/wire make Havells, Finolex, Anchor, Polycab, KEI or similar. " | — | — | — | 58,800 | |
| — | 1.00 | — | — | ||
| Augmentation of power supply including panel etc. | — | — | — | 3,64,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Mandateform.pdf
ATTACHMENT
purneacourtstationtenderdocument.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
ACS01to11_new.pdf
ATTACHMENT
ANX-VVA.pdf
ATTACHMENT
DECLARATIONREGARDINGASSOCIATIONWITHGAZETTEDRAILWAYOFFICERENGINEER-1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .