SPL REPAIR TO LT LINE AT SINGLE OFFICER LVING AREA IN 190 MTN BDE CAMP UNDER GE TAWANG

Amount

Dismantling of ACSR or AAC conductors of any size complete all as specified and directed

Dismantling Cross-arms of M.S. channel or angle sections etc. of any size complete all as specified and directed

Dismantling stay assembly complete (demolition of concrete etc. and excavation measured separately) complete all as specified and directed

Dismantling insulators of any type, any size complete all as specified and directed

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and outdoor accessories suitable for 120 Sqmm 3.5/4 Core cable complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and outdoor accessories suitable for 70 Sqmm 3.5/4 Core cable complete all as specified and directed.

Supply, laying and connecting with appropriate lugs and LT Cable indicator in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade electric cables with Aluminum conductors, laid in trenches/in pipe or fixed to pole/on wall ,using suitable clamps for fixing of cable complete all as specified and directed by Engg - in - charge of cross-sectional area 120 Sqmm X 3.5 core.

Supply, laying and connecting with appropriate lugs and LT Cable indicator in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade electric cables with Aluminum conductors, laid in trenches/in pipe or fixed to pole/on wall ,using suitable clamps for fixing of cable complete all as specified and directed by Engg - in - charge of cross-sectional area 70 Sqmm X 3.5 core.

Supply, laying and connecting with appropriate lugs and LT Cable indicator in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade electric cables with Aluminum conductors, laid in trenches/in pipe or fixed to pole/on wall ,using suitable clamps for fixing of cable complete all as specified and directed by Engg - in - charge of cross-sectional area 10 Sqmm X 2 core.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cess-pits, manholes, pier holes, cable trench etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out for hard and dense soil complete all as specified and directed.

Returing, filling in, including spreading, levelling, waterring and wall ramming in layers not exc 25 cm. for hard/dense soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S & F of High density polyethylene pipes ( HDPE) having bore of pipe 125 mm of pressure rating 6 Kgf/cm2 laid intrenches with required fittings complete all as specified and directed. (Make: Supreme/Prince/Oriplast)

S & F of High density polyethylene pipes ( HDPE) having bore of pipe 50 mm of pressure rating 6 Kgf/cm2 laid intrenches with required fittings complete all asspecified and directed. (Make: Supreme/Prince/Oriplast)

M&L for PCC (1:2:4) type B-2 using (40mm graded stone aggregates) as in foundation filling and mass concrete (for foundation bed concrete in stays /poles or any other location directed at site) complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using (40mm graded stone aggregates) as in foundation filling and mass concrete (for foundation bed concrete in stays /poles or any other location directed at site) complete all as specified and directed.

Supply install, testing & commissioning factory made LT feeder pillar box, out door type, CPRI approved factory made totally enclosed dust and vermin proof single opening with double leaf shutter duly hinged with locking arrangement made of MS Angle iron frame work and CRCA Sheet of 3.15mm thick as per IS 5039 dually painted with epoxy base powder coated paint of approved shade over a coat of Red Oxide Zink Chrome Primer neccessary holes Shall be kept on the kiosk box for incoming and outgoing cable entry. All Holes Shall be provide with brass cable gland of appropriate size.The feeder piller Box Shall be Suitable for 415 volts ,50 Hz ,3 Phase 4 wire System and shall be completed with 300 amps Capacity Aluminium TPN Busbar Chamber Having TPN 3 Phase 4 Wire System Fixed on Porcelain Insulator with Suitable size PVC copper Conductor duly Sleeved with 4 Coloured heat Shrinkable PVC Sleeve, thimble Glands and shall be compolete all as directed with the following accessories .The cost PCC Plat form and dismantling of old U/S Panel Board shall be deemed to include in the coated rate of above said item complete all as specified and directed. (i) MCCB 4 pole TPN , 250 Amps ,36 KA, 415 Volts, 50 Hz - 01 Nos (As incoming). (ii) MCB SPN 40 Amps 'C' Curve - 10 Nos (Out going). (iii) LED phase Indicator lamp (R,Y,B) with MCB SP 2 amps showing 3 phase supply switch control – 03 Nos. (iv) LED Multi Function meter for Showing Multy parameters -01 Nos.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009).

Supply and fix post top lantern 40 watt, decorative type, resistant to impact and corrosion, glare-free and bettrer uniformity, IP 65 protection complete all as specified and directed. Make:- Crompton CP NO LPTO-40WW or equivalent as specified in PS.

M/S KESANG CONSTRUCTION

DEOGRATIES SEMPER AMA ASSOCIATE

MS TD CONSTRUCTION

M/S ARUNACHAL VIKASH

M/S ACE BUILDERS

M/S L G BUILDERS

M/S RHEGON CONSTRUCTION