PROVN OF DEFI OTM ACCN FOR FD REGT AT MADUKKARAI COIMBATORE

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XII are under Ser No. 2.00 to 14.00 are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the tenderer for SITE CLEARANCE as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for ROADS /FOOTPATH /CULVERTS as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for SECURITY WALL , FENCING , GATE AND PROTECTIVE WORKS as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part- IX

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part- X

Lumpsum price worked out by the tenderer for DEMOLITION as listed in Schedule ‘A’ Part- XI

Lumpsum price worked out by the tenderer for COOLING APPLIANCES as listed in Schedule ‘A’ Part- XII

Lumpsum price worked out by the tenderer for HOT WATER SUPPLY as listed in Schedule ‘A’ Part- XIII

SCHEDULE `A' PART - XIV is not prepriced by MES and prepriced rates indicating 0.0 under column 5 signifies this fact only. Bidders shall insert their rates in Green field under Col-6.

SCHEDULE 'A' PART XIV - : FITTINGS & FIXTURES AND MISCELLANEOUS ITEMS

Material and labour for earthing of machinery/equipment Installed at power house/substation complete using galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 32x 6 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all as shown in electrical plate No 3 of SSR Part I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete. Note :- The rate is deemed to be inclusive of the cost of earth work, excavation on any type soil and removal of surplus soil to a distance of 50 Mtrs, PCC 1:2:4 type B1 for earth pit cover 6 Nos 6 mm dia CTD bar on both direction, earth lead protection GI pipe medium grade with suitable size from earth plate electrode to main switch, GI Wire length up to 7.50M will be measured as one unit)

Cutting the existing bituminous road/Concrete floor and including returning filling in making good all as specified.

Supply and fix pole mounted SMC box weather proof type with hinged type doorof white colour of size 250x200x100 with 4 way PVC connector including 1 No MCB SP 6 amps and with suitable clamping arrangements for street light fittings all as specified and directed by Engr-in-charge. Make:Sintex/Equivalent

Material and labour for boring of holes under road, pavement, hard standing, by trenchless technology using ultra sound technique and necessary machine including provn of HDPE pipe 110mm dia suitable for 0.4 mpa working pressure complete all specified. Note:-Quoted rates deems to be inclusive of transportation charges of Drilling machine, connected accessories, HDPE pipe, Statutory charges for road cutting.

Supply, Installation, testing and commissioning of LT feeder pillar box, factory made, CPRI approved, outdoor type floor mounting with channel iron pedestal frame made out of 3.15 mm thick CRCA sheet steel, compartmental type, dust proof, free standing, suitable for working on440 volts 3 phase 50 Hz A C supply, vermin proof, front and rear opening, hinged doors etc powder coated as per seven tank process and IP 65 protection, cable alley, cable entry hole at the bottom, earth strip 25x4mm , 3 phase and neutral copper bus bar suitable capacity with non adhesive color coded insulation sleeves mounted on insulators, drilled holes on bus bar strips for tapping including nuts bolts and washers, PCC works complete with copper strips of suitable size for connecting MCCB complete andcomprising of the following:- (a) MCCB, 4 pole, 125 Amp with ultimate breaking capacty Icu-25 kA at 415 Volts and thermal magnetic release conforming to IEC 60947 Part-I/IS-13947-Part-I with breaking capacity Ics=Icu at 415 Volts of 25 KA, overload setting 70% to 100%, short circuit setting 5 to 10 times- 01 No (As Incomming)

(b) MCCB, 4 pole, 100 Amp with ultimate breaking capacty Icu-25kA at 415 Volts and thermal magnetic release conforming to IEC 60947 Part-I/IS-13947-Part-I with breaking capacity Ics=Icu at 415 Volts of 25 KA, overload setting 70% to 100%, short circuit setting 5 to 10 times - 02 Nos. (As Out going ) . (c) MCB 20 amps, 4 poles, 10KA -02 Nos(As Out going ) . (d) LED indicator lamps (R,Y,B) - 01 Set (e) Digital Ammeter 0 to 100 Amps & 3 Nos of CT's, -1 Set (f) Digital Voltmeter 0-500 V with 7 position.& 2A HRC fuses/ MCB'S- 1set (g) Digital timer switch FM / 1 quarts of Make L&T (h) Contactor of type MNX 40 3 pole of Make L&T

Construction of valve chamber with inner clear dimension 600 x 600 x 900mm suitable for 50mm Gate Valves with PCC (1:4:8) 150mm thick type D2 for foundation, Brick masonary 230mm wall in CM (1:4), PCC (1:2:4) 75mm type B1 for coping, rendering in CM (1:4) 15mm thick including provisiion of 3mm thick MS sheet cover and 25 x 25 x 3mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of red oxide primer with locking arrangements including necessary earth work complete all as specified and directed

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA with digital display.Make:V-Guard(VNS100) or equivalent complete all as specified and directed

Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including non metallic rigid PVC conduit medium grade of size 19mm dia with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers for mounting of modular switches/sockets/fan regulators etc complete all as specified for the following:- (a) One light / fan point controlled by one switch.

(b) One three pin switch socket 5/6 amps outlet on independent board.

(c) One three pin switch socket 5/6 amps outlet on same board.

(d) One light point controlled by two two way switches.

(e) One bell point controlled by one bell push.

All as per item No 1 here in before but with cable 4 sqmm multi stranded copper FRLS wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FRLS, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified

Supply and fix Modular telephone socket, RJ11, 1- module including suitable size of modular metal flush boxes and modular white plate covers for mounting of modular switches/sockets complete all as specified and directed.

Material and labour for M&L for TV socket outlet, one module complete all as directed by Engineer-in-Charge.

Supply and fix power module 240V, 20A complete with 4 module plate, Starter, Plug & Socket all as directed

Supply and fix MCB Vertical TPN DB 6 way having degree of protection as per IP 43-IK09 with metal door (double door) 415 Volts complete copper bus bar with neutral link with provision for MCCB TPN as incomer and MCB TP/4P as outgoing complete all as directed by Engr-in-Charge (For Main DB)

Supply and fix decorative wall light fixture made of polycarbonate suitable to fix and including 9W retrofit LED lamp with B-22 base complete with all fixing arangement.

Kurian And Varghese

K S MUTHU CONSTRUCTTIONS

P Natesan and Co

DANDU CONSTRUCTIONS