ADDN/ALTN AND MODIFICATION IN CERTAIN BUILDINGS AT CHAFB

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water complete all as specified and directed.

Demolition of brick or stone/boulders masonary, built in cement mortar complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n/exe 15 cm thick below or above GL complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not balking) removing serviceable tiles to store complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed.

Demolition of reinforced cement concrete of any description ( reinforcement cut as reqd to facilitate demolition ) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage, thickness including roof covering etc complete all as specified and directed.

Taking down chowkhat or frames with shutters exc 1.5 sqm but n exc 4 sqm each (w/o taking of shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n/exe 1.50 Sqm each complete all as specified and directed.

Taking down shutter of any description exe 1.00 sqm but not exc 2.00 sqm and re fixing in the same opening incl easining etc complete all as specified and directed.

Taking down shutter of any description exe 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (20mm graded aggregate) as in sub base/levelling course complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded aggregate ) as in sub base for receiving floor finishes/plinth protection etc complete all as specified and directed.

M&L for Chequerd cement concrete tiles glossy finished 30cm x30cmx25mm th with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thic screeed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar 1:6 laying floor finish complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces350x 250x 7/450X 350X 7mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement mortar 1:4 complete all as specified and directed.

M&L for Precast cement concrete block masonry with soild blocks, type C1 1:3:6 using 20mm graded aggregate exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC shall be measured and paid separetely)

M&L for Rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and tabil top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded complete all as specified and directed.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and without glazing bars complete with dovetailed or welded complete all as specified and directed.

S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed.

S&F Mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F for 35 mm thick factory made second class hard wood plain framed panelled shutter ( two panel) with lock rail and panel of 9mm B.W.P. commecrcial ply or 12mm veneered particle board with commecrcial veneering on both face. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick 1st class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed.

S&F for 4mm thick sheet glass ordinary quality and fixed with aluminium beading in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

S&F for 4mm thick Figured glass, pin head type and fixed with aluminium beading in squares not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F Butt hinges 100mm medium weight cold rolled mild steel complete all as specified and as directed.

S&F Mild steel sliding door bolt plate type stove enamelled black of length 300 mm with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed

S&F 200mm long of barrel tower bolts stove enamelled black with bright bolt complete all as specified and directed.

S&F 150mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and as directed..

S&F Factory made solid PVC Moulded door shutter,28 to 30mm thick(stiles),with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face ,with particle board core, supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.

S&F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

M&L for Powder coated Aluminium windows of three tracks outer frame top, side sections, bottom frame(track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh (total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specfied and directed.

S&F Powder coated Aluminium Frame work for grills Deco-grill Model DG-104(10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc.,complete all as specified and as directed.

S&F Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc complete all as specified and as directed.

S&F Powder coated aluminium door shutters (any type, normal or sliding), (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and as directed.

S&F Powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed.

S&F Powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) ,suitable handle (1 no.) complete all as specified and as directed.

S&F 9mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality, fixed with necessary glazing clips, in squares exceeding 0.5 Sqm in each panel complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for sliding/openable doors, windows, ventilators and partitions fixed portions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,, with using aluminium section 75mmx45mmx1.25mm as in partitions and and door choekhat section door section 47.62mmx44.45mmx1.67mm,middle section of door 83.50mmx44.45x1.49mm and bottom of door section 114.30mmx44.45mmx1.75mm and not less than weighing 0.55kg/m if any section required including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws,sliding arrangements, including Sheet glass of 5.5 mm thick and 12mm thick both side prelaminated particle board etc height of glass and particle as directed by Engr-in-charge as per site requirment incl dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket incl suitable hinge,aluminium handle and locing arrangements etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all necessary arrengement complete as specified and directed. Note : All the aluminium sections provided under this item shall be as per mentioned in the approved manufactures sections/fittings.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F Door closer hydraulically aluminium cast body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm th of any colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling structural steel framed trusses etc n exc 10m complete all as specified and directed.

Dismantling structural steel work incl door gates but excluding framed work complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. fe-410 (gde E-250) complete all as specified and directed.

S&F plates(plain or chequered) channels,distance pieces, cleats etc.square cut or notched including riveted, bolted or welded attachment complete all as specified and directed.

S&F Framed work such as grills ,shouldered and/or riveted,or forged into spikes; framed,guard bars; barred iron doors;ladders; framed balusters; walk,ways; railings; framework of water tanks and similar work,conforming to Fe-290.Gde-E-165 complete all as specified and directed.

S&F welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and directed.

S&F Mild steel works in fencing post and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming toFe-290 Gde E-165 complete all as specified and directed.

Excavation in post holes each n. exc 0.50 Cum in any type of soil , getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm ,watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L for Plain cement concrete Type C2 1:3:6 ( 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Supply only chain link fencing any size complete all as specified and directed.

Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

S&F mild steel, plain, black sheet t in hearths;covering to door shutters; covering to door chowkats (frames);chullah hoods; watertanks; water troughs;ducts; urinal troughs and funnels, etc. cut tosize edges beaded if directed,holes punched;including round headed screws, clout nails or rivets and fixed to woodor steel members, etc.,with plain 40 mm lapjoints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Dismantling water storage tanks of any description,exc 250 & n.exc 500 litres capacity and removing from site complete all as specified and directed.

S&F Rotational moulded polythylene 3 layer, 500 litres capacity water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position including 20 mm ball valve high pressure oof PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete all as specified and directed.

S&F plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe ccomplete all as specified and directed.

S&F Vitreous China wash basin, white flat back, size 550x400mm including brackets, 32mm dia CP waste coupling, waste pipe, short connection complete cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F PVC connection pipe 600mm long 15mm dia both end having brass coupling nut and PVC washer complete all as specified and directed.

S&F in repairs Toilet paper holder of stainless steel fixed by CP brass screw in wall complete all as specified and directed.

S&F 15 mm dia Health faucet Chromium plated brass with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed.

S&F 110 mm dia PVC sanitary connection for WC 5 mm dia complete all as specified and directed.

S&F in repairs 15 mm bore fancy type, chromium plated Stop valves / Angle cock screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs brass chromium plated fancy type Towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed.

S&F in repair 20 mm bore gun metal Globe or Gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified and directed.

S&F CP two way Stop cock with all accessories complete all specified and directed.

S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe complete all as specified and directed.

S&F Gratings doom,100mm dia of PTMT (minimum weight 25 gms) complete all as specified and directed.

S&F Gratings doom, 125mm dia with waste hole of PTMT(minimum weight 40 gms) complete all as specified and directed

Taking up or down 15mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25 mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore GI tubing med grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed.

S&F 20 mm bore GI tubing med grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed.

S&F 25 mm bore GI tubing med grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified and directed.

S&F in repair 25 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified and directed.

Dismantling pipes of any description any size fixed to wall or laid under floor complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F (SWR) 75mm dia floor trap,plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed

S&F PVC (SWR) 75mm bore junction single, (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) 110mm bore junction single, (Single T) equal or unequal complete all as specified and directed.

S&F Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

M&L for Plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in surface channel, drain, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed.

M&L Precast cement concrete (reinforced ) slab type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover/ slab covers set in cement mortar 1: 4 including necessary form work complete all as specified and directed.

S&F 10 mm dia and over high deformed TMT bar cut to length, bend to shape required incl cranking bending & hooking ends & binding with MS wire annealed n. less 0.9mm dia complete all as specified and directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation in hard/ dense soil and getting out complete all as specified and directed.

Demolition and breaking up drain pipes , 150 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar as cin foul conditions.

M&L 150mm Concrete bed to drain pipe 150mm dia incl packing under and haunching against the sides of pipe PCC 1:4:8 type D2 complete all as specified and directed

M&L Salt galzed stone ware drain pipe , grade 'A' of 150mm dia laid in trenches and jointed including all accessories & fittings complete all as specified and directed.

Returning filling soil in including spreading, levelling , watering and well ramming n exc. 25 cm in layers complete all as specified and directed.

Removal of excavated surplus soil at a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm th plain PVC sheet suitably placed in false celing grid made of aluminim GI/MS as per specification and drawing complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for Applying 2mm thick wall care putty on wall including preparation old /new surfaces plastered or unplastered surfaces, complete all as specified and directed.

M&L for Applying two coats of OBD to old treated surfaces of wall including preparation of old surface of walls through mechanical means (by washing down,rubbing down and stopping of distempered surface),complete all as specified and directed.

M&L for Preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of ceilling and applying two coat of white wash complete all as specified and as directed.

M &L for preparing new plastered or un plastered surface of walls and applying two coats of Cement base paint on walls a coat of chalk primer through mechanical means complete all as specified and directed.

M &L for preparing old plastered or un plastered surface of walls and applying two coats of Cement base paint on walls through mechanical means complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer to new surfaces including preparation of surfaces, over 10cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surfaces over a coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel surfaces over a coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as specified and directed.

M&L for Applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth including preparaton of surfaces complete all as specified and directed.

Removing building materials etc. (other than spoil payable under items -earthwork) to a distance of 30.00 Km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.

M&L for Hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed

M&L Interlocking cement concrete paver blocks,coloured 60mm thick factory ,any shape and size confirming to IS 15658-2006 of M-35 grade with grey cement and no pigment manufacturing by vibrating process complete all as specified and directed. (Note: Shape of block shall be as approved by Engr-in Charge)

Taking down ceiling fans from ceiling, dismantling blades complete all as specified and directed.

Taking down Wall mounted fan and Refixing the same including connecting up and provision of cable complete all as specified and directed.

Taking down Exhaust Fans, from walls and Refixing the same including connecting up and provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc on existing stone/ brick masonary, including fixing top cover /PVC / junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light controlled by one single pole 5 Amps switch.

One Exhaust fan point controlled by one single pole 5 Amps switch.

One 3 pin switch socket outlet point 5 Amp switch on independent board for wall mounted fan.

One 3 pin switch socket outlet point 5 Amps switch on independent board.

One 3 pin switch socket outlet point 5 Amps switch on same board.

S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc on existing stone/ brick machinery, including fixing top cover /PVC / junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed

S&F Piano switch , single pole one way 6 Amps complete all as specified and directed.

S&F Piano switch , single pole one way 16 Amps complete all as specified and directed.

S&F Socket , 6 Amps, 2/3 pin, 240 volts AC, 2/3 pin combined complete all as specified and directed.

S&F Socket , 6/16 Amps, 2/3 pin, 240 volts AC, 2/3 pin combined complete all as specified and directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals complete all as specified and directed.

S&F LED Light fitting, 20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.

S&F LED Light fitting, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.

S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 1.50 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed on stone wall, floor or ceiling etc / brick masonary inc 1.50 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed on stone wall, floor or ceiling etc on existing stone/ brick masonary inc 4.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements on stone wall, floor or ceiling, brick masonary inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including non-metallic rigid PVC conduit and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary including 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements, fixed on stone wall, floor or ceiling etc on existing stone/ brick masonary inc 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Two runs of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 16.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements fixed on stone wall, floor or ceiling / brick masonary inc 16.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Two runs of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.

M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mmdia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on complete all as specified and directed.

S&F Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire complete all as specified and directed.

S&F Sheet metal enclosure for VTPN DB's double door TPN 06 ways Suitable for 125 Amps MCCB Fixed in DB, deep drawn with 200 Amps rated copper bus bar 415 V, Including taking down old unsv from existing place complete all as specified and directed. Make : INDOASIAN Model no. F1+12, CAT REF 811888 or equivalent in HAVELLS/ L& T

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V,Including taking down old unsv from existing place complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door TPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed.

S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SPN, 40 Amps, 240/415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SP, 6-40 Amps, 240V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCCB 125 A, TP, 16 KA, complete all as specified and directed.

S&F Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps complete all as specified and directed.

S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 4.00 sqmm 1100 volts grade in and including medium grade 25 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc on existing stone/ brick machinery, including fixing top cover /PVC / junction boxes fixing on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 4.00 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed.

M&L for shifting of Air Conditioner, Split type capacity up to 1.50 / 2.00 TR including stabilizer from existing location to new location as per user requirement and installing, topping up of gas, replacement of copper tubing connecting up, commissioning and testing complete all as specified and as directed. Note: Topping up of gas and copper tubing shall be measured and paid seperately

S&F Copper tube, 15 mm / 18 mm dia, superior quality suitable for refrigeration and suction lines of split ACs, drawn through pipes/ fixed to walls/ laid on floor or roof complete all as specified and directed.

S&F Copper tube, 9 mm dia, superior quality suitable for refrigeration and discharge lines of split ACs, drawn trough pipes/ fixed to walls/ laid on floor or roof complete all as specified and directed.

S&F Refrigerant gas,(R 32) suitable for cooling equipments supplied and filled complete all as specified and as directed.

M&L for core cutting for fixing of split AC & equipments supplied and filled complete all as specified and as directed.

S&F Wall mounted fan, 400 mm sweep, 2050 RPM, Air delivery 90 cmm, with complete acessories complete all as specified and as directed. Make : BAJAJ, Model No. NEO SPECTRUM, CAT NO : 250890 or equivalent in HAVELLS /WIPRO/ POLYCAB /CG / PHILPS

Dismantling of existing Walk in cooler from existing Medical stores, shifting of the same to new proposed site, including testing and commisioning of the walk in cooler,complete all as specified and as directed.

K V RAJANNA (BID ID -3166304)

dhanalakshmi constructions (BID ID -3164372)